Mercedes-Benz C250 Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(276)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(276)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Mercedes-Benz C250 Intake Manifold Gaskets Replacement is $335 with $83 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Mercedes-Benz C250L4-1.8L TurboService typeIntake Manifold Gaskets ReplacementEstimate$803.14Shop/Dealer Price$880.62 - $1059.18
2015 Mercedes-Benz C250L4-1.8L TurboService typeIntake Manifold Gaskets ReplacementEstimate$476.92Shop/Dealer Price$536.23 - $701.17
2012 Mercedes-Benz C250V6-2.5LService typeIntake Manifold Gaskets ReplacementEstimate$720.88Shop/Dealer Price$774.78 - $908.64
2011 Mercedes-Benz C250V6-2.5LService typeIntake Manifold Gaskets ReplacementEstimate$560.29Shop/Dealer Price$610.60 - $741.77
2013 Mercedes-Benz C250L4-1.8L TurboService typeIntake Manifold Gaskets ReplacementEstimate$768.90Shop/Dealer Price$844.59 - $1021.81
2010 Mercedes-Benz C250V6-2.5LService typeIntake Manifold Gaskets ReplacementEstimate$577.39Shop/Dealer Price$632.64 - $777.14
2014 Mercedes-Benz C250L4-1.8L TurboService typeIntake Manifold Gaskets ReplacementEstimate$768.90Shop/Dealer Price$834.90 - $1004.85
Show example Mercedes-Benz C250 Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(276)

Rating Summary
256
9
3
2
6
256
9
3
2
6

Jason

10 years of experience
175 reviews
Jason
10 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Oil Change - Daly City, California
Jason was there ahead of schedule, which worked out perfect. I didn't have the ideal work environment for him but he rolled through it like a pro. I definitely give a thumbs up to this one. The only draw back was that his car was nicer than mine. Mike Coupland From all over Northern Cal.

Michael

23 years of experience
67 reviews
Michael
23 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Spark Plug Replacement - Las Vegas, Nevada
Michael was great. He was very knowledgeable and gave me some great advice. I’d have him back without question!

Brikk

19 years of experience
389 reviews
Brikk
19 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Oil Change - Charlotte, North Carolina
Excellent!

Eduardo

20 years of experience
570 reviews
Eduardo
20 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Brake Pads Replacement (Front, Rear) - Sugar Land, Texas
Excellent job on my Mercedes

Excellent Rating

(276)

Rating Summary
256
9
3
2
6
256
9
3
2
6
Number of Mercedes-Benz C250 services completed
3036+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Thermo Coolant Fan Switch Last?
There There are many hard-working parts in your vehicle but perhaps the hardest working part of all is your engine. With that said it's easy to understand why your engine heats up. Allowing it to overheat means you risk damaging...
How to Renew Your Car Registration in Arizona
Driving Driving on the Arizona is a privilege and most people treat it as such. In order to pay for the beautiful roadways in Arizona, citizens will have to pay to keep their cars registered with the DMV. Either every...
2012 Ford Fusion vs. 2012 Toyota Camry: Which Should I Buy?
While most people believe that domestic sedans just cannot compete with the Honda Accord and the Toyota Camry, the industry leaders, that is not necessarily true. Yes, there are some metrics where the Camry just excels, however the Ford Fusion...

Throttle position sensor light on

For many vehicles, regardless of manufacturer, there is the need to do a "re-learn" sequence (after replacing the TPS or a battery) so the TPS and transmission will work smoothly. You may have to drive the vehicle for a bit...

My car tries to crank but won't start. It sounds like it is not getting gas - 2011 Jeep Grand Cherokee

Hi there. It sounds like it has a bad electronic ignition switch. I have seen a lot of these fail on this vehicle. I usually do a voltage test of the switch, but most of the time it is the...

Auto stop not working and changed to engine idle on a Tahoe hybrid. Any thoughts on what could be causing the change?

Hi there. This is normal condition for your vehicle to perform an idle change from auto stop. The main transmission battery is low on a charge and is causing the engine to continue to drive under an idle condition to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com