Mercedes-Benz C240 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(132)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(132)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz C240 Power Steering Pressure Hose Replacement is $577 with $297 for parts and $280 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Mercedes-Benz C240V6-2.6LService typePower Steering Pressure Hose ReplacementEstimate$1306.18Shop/Dealer Price$1483.46 - $1950.08
2004 Mercedes-Benz C240V6-2.6LService typePower Steering Pressure Hose ReplacementEstimate$1264.73Shop/Dealer Price$1427.79 - $1883.74
2001 Mercedes-Benz C240V6-2.6LService typePower Steering Pressure Hose ReplacementEstimate$885.16Shop/Dealer Price$1039.96 - $1489.73
2005 Mercedes-Benz C240V6-2.6LService typePower Steering Pressure Hose ReplacementEstimate$1264.73Shop/Dealer Price$1427.98 - $1884.08
2002 Mercedes-Benz C240V6-2.6LService typePower Steering Pressure Hose ReplacementEstimate$885.16Shop/Dealer Price$1045.11 - $1498.74
Show example Mercedes-Benz C240 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(132)

Rating Summary
125
4
2
1
0
125
4
2
1
0

Simon

28 years of experience
378 reviews
Simon
28 years of experience
Mercedes-Benz C240 V6-2.6L - Radiator - Upper Marlboro, Maryland
Simon was on time and very friendly

Robert

23 years of experience
343 reviews
Robert
23 years of experience
Mercedes-Benz C240 V6-2.6L - Serpentine/Drive Belt Replacement - Fort Worth, Texas
Robert was very courteous, knowledgeable and professional. He completed the job with speed and ease.

Deward

18 years of experience
156 reviews
Deward
18 years of experience
Mercedes-Benz C240 V6-2.6L - Engine hesitates during acceleration Inspection - Greensboro, North Carolina
Deward was punctual and professional. He appeared very knowledgeable about the vehicle and I am glad he performed the inspection so I know the next steps to take and decisions to make about my car.

Victor

12 years of experience
211 reviews
Victor
12 years of experience
Mercedes-Benz C240 V6-2.6L - Fuel Pump - Norfolk, Virginia
He's a good mechanic he point things out let you know what you need, open, honest mechanic, you know his craft

Excellent Rating

(132)

Rating Summary
125
4
2
1
0
125
4
2
1
0
Number of Mercedes-Benz C240 services completed
1452+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

What Are the Benefits of Having an Engine Rebuilt Instead of Replaced?
Rebuilding a damaged engine may be a more economical option than full replacement. In an engine rebuild bearings, gaskets, and seals are replaced.
The Guide to Colored Curb Zones in New Mexico
Drivers Drivers in New Mexico have a number of parking regulations and laws they need to be aware of so they do not inadvertently park in the wrong location. If you park in a zone where you are not allowed,...
5 Essential Things to Know About Minivans
Whether Whether you have a large family or you’re the one that hauls the team around, you may be wondering if a minivan is the right option for your new car – even though you cringe at the thought. Before...

It takes two or three tries to start the car.

Hi, thanks for writing in. I recommend testing the fuel pressure and monitoring the pressure after the key is turned off to see if the pressure drops to zero. If it does, then the system will need to be tested...

Engine cutting off

This is a sign of a failing or dirty mass air flow sensor. The mass air flow sensor is a unit in the intake system that monitors air intake as it is mixed with fuel prior to being injected into...

2004 Nissan Xterra rotor is not turning

Hi there. It does sound you have a broken timing belt. But before you immediately go out to replace the timing belt, the cover should be removed and the belt inspected to confirm that it is actually broken. Even after...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com