Mercedes-Benz B250e Banging noises when driving over the bumps Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,647)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,647)

Banging noises when driving over the bumps Inspection Service

How much does a Banging noises when driving over the bumps Inspection cost?

On average, the cost for a Mercedes-Benz B250e Banging noises when driving over the bumps Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Mercedes-Benz B250eElectricService typeBanging noises when driving over the bumps InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2016 Mercedes-Benz B250eElectricService typeBanging noises when driving over the bumps InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mercedes-Benz B250e Banging noises when driving over the bumps Inspection prices

Unfortunately we don’t always find ourselves driving over perfectly smooth, freshly paved roads. And while rough roads may cause some issues with your vehicle, they can also help diagnose potential issues. A banging noise while driving over bumps can be startling for a driver, especially if the same noise did not manifest itself on flat roads. If you notice a banging noise while driving over a bump, you should have a mechanic inspect your vehicle.

How this system works:

Your vehicle’s suspension system is made up of many components designed to adjust when driving over rough terrain, to ensure a comfortable ride. When these components begin to fail, they may produce clunking or banging noises to let you know something has gone wrong. However, typically when suspension components like tie rod ends and ball joints fail, they will make a banging noise all the time, and not just over bumps. The fact that the noise only seems to occur while driving over a bump may be a sign of a different issue.

Common reasons for this to happen:

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Worn Control Arm Bushings: The control arms on your vehicle’s suspension allow for movement up and down when driving on uneven terrain. Part of the control arm assembly are bushing, typically made of rubber or polyurethane. The bushings are designed to dampen any noise that might be created when your vehicle goes over a bump. If the bushing wear down, the noise is not dampened and you may hear a resulting bang when driving over bumps.

  • Loose Brake Caliper: Your vehicle’s brake calipers are pistons that engage the brakes when the brake pedal is applied. Calipers are typically secured with bolts and do not move. If a caliper bolt has become loose it may cause the caliper to make a banging noise when driving over bumps.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the banging noise when going over bumps. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

The mechanic will begin by raising the vehicle and removing tires to get a better view of the vehicle’s suspension. From here, he or she will be better able to access and replace components that may have failed.

If your vehicle is equipped with a sway bar link, the mechanic will inspect it for any signs of superficial damage. The mechanic should then look at the sway bar bushings to see if they are worn and need to be replaced. The mechanic will then remove the old bushings and sway bar if necessary, and replace them.

If the mechanic suspects the control arm bushings, he or she will check for signs that the bushing has worn down. The mechanic should also inspect the whole control arm assembly and replace it if necessary. The mechanic will then install the new bushings.

While having a loose caliper bolt is rare, it is important to have the calipers inspected because of the potential loss in braking the bad calipers could create. The mechanic should check to make sure that the bolts are securely tightened and the calipers is lined up with the rotor. If the calipers was loose it may have warped over time and become ineffective. The mechanic will replace the caliper if it is needed.

How important is this service?

A vehicle that makes a banging noise while going over a bump may reveal an issue with the suspension system. Not only does the suspension system provide a comfortable ride but it plays a critical role in the safety of the vehicle, especially when cornering and braking. If you notice a noise while going over bumps, you should have it inspected to make sure that the suspension is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,647)

Rating Summary
5,256
190
54
28
119
5,256
190
54
28
119

Dan

39 years of experience
990 reviews
Dan
39 years of experience
Mercedes-Benz SLK350 V6-3.5L - Banging noises when driving over the bumps - Alpharetta, Georgia
First time I tried YourMechanic. I can highly recommend Dan. Knowledgeable and friendly mechanic!

Brikk

18 years of experience
389 reviews
Brikk
18 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Car is not starting - Charlotte, North Carolina
Very professional. Very knowledgeable.

Vaughan

11 years of experience
92 reviews
Vaughan
11 years of experience
Mercedes-Benz S550 V8-5.5L - Spark Plugs - Desoto, Texas
Vaughan is very knowledgeable about my car. My wife was the one at home during the appointment, he called me to give me updates as he was working on the car. I would recommend Vaughan to my friends and family.

Eduardo

19 years of experience
554 reviews
Eduardo
19 years of experience
Mercedes-Benz GL450 V8-4.6L - Serpentine/Drive Belt - Katy, Texas
Outstanding in all respects.

Excellent Rating

(5,647)

Rating Summary
5,256
190
54
28
119
5,256
190
54
28
119
Number of Mercedes-Benz services completed
62117+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0080 OBD-II Trouble Code: Exhaust Valve Control Solenoid Circuit High (Bank 1)
P0080 P0080 trouble code definition P0080 is in reference to the bank 1 exhaust valve control solenoid. The vehicle may have a bank 1 and bank 2 control solenoid. This code may be seen in association with P0078 and P0079....
How to Check Belts in Your Car
Engine drive belts are a crucial part of how your car functions. Knowing how to identify any issues with them can help prevent a breakdown.
How to Handle a Burst Tire
Tires burst when the tire pressure is too low or too high, there is a mechanical defect in the tire itself, or a foreign object damages the tire.

car squeaks and is har to turn

I'm going to guess that you have a power steering pump belt that is slipping. The slipping belt makes the squeal and the slower turning pump makes the wheel hard to turn. Your car may just need a new belt...

Unused car: disc brake pads clamped or rusted to brake rotor and wheels won't move , how to remove?

Hi - although the brake rotor is rusty, brake pad material is organic, and won't really "rust" to the rotor. Remove the brake caliper bolts, and use a sturdy pry bar to leverage the brake caliper off the rotor. This...

My transmission jerks hard when I floor it

Transmission shift problems can be caused by simple faults, such as a low fluid level, contaminated fluid, plugged filter in the pan, bad shift solenoid(s), faulty throttle position sensor or speed sensor, but shift problems can also be due to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com