Mercedes-Benz 600SEC Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,576)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,576)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Mercedes-Benz 600SEC Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 600SECV12-6.0LService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example Mercedes-Benz 600SEC Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,576)

Rating Summary
5,188
189
54
28
117
5,188
189
54
28
117

Juan

12 years of experience
55 reviews
Juan
12 years of experience
Mercedes-Benz CLK320 V6-3.2L - Oil level is low - Vallejo, California
Super Professional

Brett

10 years of experience
197 reviews
Brett
10 years of experience
Mercedes-Benz E500 V8-5.0L - Oil Change - Austin, Texas
5 Star service as always...One of only two I know I can trust ...

Ben

41 years of experience
1421 reviews
Ben
41 years of experience
Mercedes-Benz C230 V6-2.5L - Brake Pads Replacement (Front, Rear) - Houston, Texas
Showed up early did the job fast not to mention how well done it was, my first time using this website and I'm glad I did will be using it for any futur problems

Raymundo

7 years of experience
17 reviews
Raymundo
7 years of experience
Mercedes-Benz GLE350 V6-3.5L - Brake Pads Replacement (Front, Rear) - Dallas, Texas
Smart, no nonsense kind of guy! He arrived a little late, because he got lost. However, he did call prior to his scheduled arrival time to let me know and to get better directions. Once he arrived, he changed out my brake pads and rotors much faster than expected! After driving now for about two weeks, I have had zero issue. :-)

Excellent Rating

(5,576)

Rating Summary
5,188
189
54
28
117
5,188
189
54
28
117
Number of Mercedes-Benz services completed
61336+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Guide to Colored Curb Zones in Tennessee
Drivers Drivers in the state of Tennessee have to pay attention to the laws of the road while they are out and driving, but they also need to make sure they know and understand all of the parking laws present...
P2509 OBD-II Trouble Code: ECM/PCM Power Input Signal Intermittent
P2509 P2509 code definition The P2509 diagnostic trouble code is an indication that the ECM/PCM power input signal is having an intermittent problem. Related Trouble Codes: P2505 OBD-II Trouble Code: ECM/PCM Power Input Signal P2506 OBD-II Trouble Code: ECM/PCM Power...
Why Serpentine Belt Replacements on Cars With Limited Clearance Can Be Tricky
Changing a serpentine belt is a service that can involve performing some difficult maneuvers on the engine, especially on cars with limited clearance.

How do you remove the crossbars from the roof rack?

The crossbars on your SUV’s roof rack are what make it capable of carrying loads, but you might find that you need to remove them from time to time. Here’s how to do that: Loosen both thumbwheels. Slide the crossbar...

Dashboard lights out and something draining new battery

Hello there, thank you for asking about your 1957 Chevrolet Bel Air. Checking for parasitic draw on a battery can be done by inserting an ammeter in series with the negative battery cable, then removing the fuses one by one...

Engine cranks when cold but not warm

A scope (oscilloscope) exam during those few minutes after it starts, and while the engine idles roughly, will reveal the cause. It is either ignition or fuel system related. To schedule a rough running engine diagnostic(https://www.yourmechanic.com/services/car-idle-is-rough-inspection) please feel free to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com