Mercedes-Benz 600SEC Brakes must be pumped to work Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,576)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,576)

Brakes must be pumped to work Inspection Service

How much does a Brakes must be pumped to work Inspection cost?

On average, the cost for a Mercedes-Benz 600SEC Brakes must be pumped to work Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 600SECV12-6.0LService typeBrakes must be pumped to work InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example Mercedes-Benz 600SEC Brakes must be pumped to work Inspection prices

When you slow your car or decide to stop, you press the brake pedal. Most of the time, the pedal will be firm and you’ll be able to apply steady pressure until you reach the desired slower speed, or come to a complete stop. However, sometimes the pedal may “go to the floor” and you’ll have to pump it a couple of times to get the firm feel that you’re used to. If your brakes must be pumped to work, there’s a serious issue that needs to be addressed.

How this system works:

Your brakes work on fluid pressure. If the braking system isn’t able to build up the pressure necessary to operate the system, your pedal will feel strange. In some cases, it will be spongy and soft. In others, you’ll have to pump the brakes.

When you press the brake pedal, the master cylinder sends fluid into the lines, creating pressure. This activates the calipers, which squeeze the rotor on each wheel between the brake pads. Drum brakes work on a similar basis, but fluid pressure causes the actuator to press the shoes out against the sides of the drum to slow down the wheels.

Obviously, if there isn’t enough pressure in the lines, this doesn’t happen. However, if moisture has gotten into the system, the result can be similar. Water has a lower boiling point than brake fluid. When it’s heated at the brakes, it vaporizes, creating air in the lines (and allowing compression – brake fluid cannot be compressed).

Common reasons for this to happen:

  • Air in the Lines: The number one most common cause for having to pump your brakes to get them to work is air in the lines. This may be because your brakes were recently serviced but not bled correctly. It requires bleeding each wheel several times, starting with the wheels farthest from the master cylinder (passenger rear, driver rear, then passenger front and driver front). It can take multiple bleeds to remove all the air from the lines, even after a basic service. The fluid will then need to be topped off.

  • Low Brake Fluid: If your brake fluid is low (and it’s not due to brake pad wear), then the system will be unable to create enough pressure for normal operation and you may have to pump the pedal. Generally, low fluid is caused by a leak somewhere in the system, including at the caliper, the brake lines, or even the master cylinder.

  • Failing Master Cylinder: While rare, master cylinder failure does occur. If the master cylinder has begun leaking fluid down the back of the engine, you can expect to experience poor brake operation and reduced safety on the road.

  • Moisture in the Fluid: If your brake fluid has absorbed moisture (which is normal over time and through regularly wear and tear), you’ll notice reduced braking performance, including the possibility that you’ll have to pump the brake pedal in some situations.

  • Damaged or Missing Bleeder Valve: Each wheel should have a brake fluid bleeder valve on the line near the wheel hub. If one of yours has been damaged, it’s possible that you’re leaking fluid and allowing air into the line at the same time.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect your car’s brake system. The mechanic will visually inspect the master cylinder, the brake lines, calipers, and the rest of the system in order to determine the underlying cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the entire brake system, which may require the removal of one or more wheels. The mechanic will also need to check for air in the lines, as well as leaks in the lines and at the master cylinder.

How important is this service?

If your brakes have to be pumped to work, your system needs immediate service. This indicates a significant problem, including air in the lines. It reduces your stopping capability on the road, which endangers you, your passengers, as well as others on the road. One of our mechanics can diagnose and repair the problem, ensuring that you’re safe while driving.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,576)

Rating Summary
5,188
189
54
28
117
5,188
189
54
28
117

Adam

17 years of experience
231 reviews
Adam
17 years of experience
Mercedes-Benz R350 V6-3.5L - Oil Change - Boca Raton, Florida
Performed the requested work efficiently and professionally. He was delayed due to his previous appointment, kept in contact with me , and no problems were encountered.

Terry

18 years of experience
51 reviews
Terry
18 years of experience
Mercedes-Benz E320 V6-3.2L - Car is shaking or vibrating - Kennesaw, Georgia
No complaints!! Very professional and friendly. Will request Terry for any jobs that need to get done.

Ronald

41 years of experience
313 reviews
Ronald
41 years of experience
Mercedes-Benz CLS500 V8-5.0L - Starter - Spring, Texas
Very friendly

Jonathan

13 years of experience
171 reviews
Jonathan
13 years of experience
Mercedes-Benz 380SL V8-3.8L - Oil Change - Wellesley Hills, Massachusetts
Jon is a good good mechanic and very friendly. First time using the app and I liked, I already booked another service.

Excellent Rating

(5,576)

Rating Summary
5,188
189
54
28
117
5,188
189
54
28
117
Number of Mercedes-Benz services completed
61336+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Wheel Bearing Gone?
Wheel bearings help a car roll smoothly. Bad or missing wheel bearing symptoms include grinding noises, a loose steering wheel, and uneven tire wear.
Symptoms of a Bad or Failing Throttle Position Sensor
Common signs include lacking power when accelerating, rough or slow idle, stalling, inability to shift up, and the Check Engine Light coming on.
I Have No Idea What's Wrong With My Car - Where Do I Begin?
Any driver can use their senses to diagnose a car problem. Use your sense of smell, touch, and hearing to figure out what's causing the issue.

Transmission fault message when pushing gas pedal to floor, in addition to high-pitched sound.

As for the high pitched noise you may have a serpentine belt or belt tensioner that needs replacement. As for the transmission issue, these vehicles have electronic transmissions. With that considered there could potentially be an electrical issue within the...

Car overheating, but reservoir full

To start, a coolant pressure test should be done to check for any leaks in the cooling system. If there are leaks, the coolant level will be low and there will be air pockets in the system causing frequent overheating....

Loud screeching noise on left front tire when the car is in motion

Hi there. If there is a screeching noise when the vehicle is moving coming from the wheels, then the brakes need to be checked again. That type of noise is typically caused by a bad brake pad sensor. It is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com