Mercedes-Benz 400SEL Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz 400SEL Power Steering Pressure Hose Replacement is $360 with $206 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 400SELV8-4.2LService typePower Steering Pressure Hose ReplacementEstimate$582.72Shop/Dealer Price$692.71 - $1007.07
Show example Mercedes-Benz 400SEL Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
Mercedes-Benz 400SEL V8-4.2L - Car starts and then dies - Union, New Jersey
First his did great job and finally he said the issue was ignition coil.

Todd

27 years of experience
95 reviews
Todd
27 years of experience
Mercedes-Benz CL550 V8-5.5L - Power Steering Pressure Hose - Hampton, Virginia
Fast service! Very knowledgeable!!

Arturo

28 years of experience
303 reviews
Arturo
28 years of experience
Mercedes-Benz E320 V6-3.2L - Power Steering Pressure Hose - San Diego, California
Second repair Arturo has done for me. Very happy with all his work.

James

24 years of experience
130 reviews
James
24 years of experience
Mercedes-Benz R350 V6-3.5L - Power Steering Pressure Hose - Douglasville, Georgia
Best job a mechanic can do without any stalling.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0
Number of Mercedes-Benz Power Steering Pressure Hose Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Replace a Power Steering Input Shaft Seal
A faulty power steering input shaft seal can cause hydraulic fluid to leak from the power steering input shaft and cause the system to overheat.
How Is a Dirty Light Bulb Socket Cleaned?
Your Your car’s light bulb sockets are protected by lenses, so they won’t get as dirty as they might, but they will still accumulate dirt and grime over the years. Regular cleaning can help ensure they remain functional for a...
How Long Do Brake Rotors Last?
Brake rotors, sometimes called discs, are an important component of the braking system on any vehicle. The brake rotors are the part of...

bleach water gas tank

The problem with bleach is that it can damage anything that is stainless steel. You may have it in the fuel lines of your fuel system, along with small parts in your fuel injectors. The bleach will clear your fuel...

My Check Engine Light was on, so I tried the paperclip trick to get a code and the light went out. Tested the bulb and it works

Since I cannot display an image on here, I will describe it best as possible. When looking at the diagnostic connector, is is basically a rectangle with flared tabs on one side. Consider that side of the bottom when viewing...

My roof leaks when it rain on the passenger side door how to fix myself

Water leaks can be difficult to locate and fix on some of the leaks. Inspect the door seal first for damage and replace if bad. If you need assistance to locate the leak you can have a mechanic like one...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com