Mercedes-Benz 400SEL Camshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,730)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,730)

Camshaft Seal Replacement Service

How much does a Camshaft Seal Replacement cost?

On average, the cost for a Mercedes-Benz 400SEL Camshaft Seal Replacement is $359 with $26 for parts and $332 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 400SELV8-4.2LService typeCamshaft Seal ReplacementEstimate$454.89Shop/Dealer Price$529.25 - $614.51
Show example Mercedes-Benz 400SEL Camshaft Seal Replacement prices

What is the Camshaft Seal all about?

Like the crankshaft, the camshaft is an essential component of the combustion process that moves your car down the road. Its motion is responsible for instigating valve movement, which regulates the air/fuel mixture that fuels the “big bang.” The camshaft uses lobes (called cams) to push against and open the valves as the camshaft rotates (springs on the valves return them to their closed position) in sync with the pistons. Note: Both valves are closed during compression and combustion so that the combustion chamber is sealed.

The camshaft seal fits between the camshaft and the cylinder head, sealing the camshaft between the top of the head and the valve cover. Like all of an engine’s internal moving parts, the camshaft must be well lubricated, essentially submerged in oil, to do its job properly. Without the camshaft seal, this lubricating oil would leak out of the engine block, befouling the engine bay and putting the engine’s internal components in danger from insufficient lubrication. It also keeps contaminants like dust and dirt from damaging the engine’s internal components.

Keep in mind:

  • Typically, camshaft seals do not need to be replaced unless other components, such as the camshaft, are being replaced.
  • Replace the timing belt when replacing the camshaft seals, and vice versa.
  • A leak from the camshaft seal or valve cover gasket are hard to tell apart if the valve cover gasket is leaking in the same area as the cam seal.

How it's done:

  • The battery is disconnected
  • The camshaft timing belt and gear is removed
  • The camshaft seal is replaced
  • The timing gear and timing belt is reinstalled
  • The battery is reconnected and timing checked and vehicle checked for leaks.

Our recommendation:

One of the most important parts of your car, the camshaft seal is made from a durable material, capable of withstanding extreme temperatures and pressures. But if it fails, replacement is the only cure. The good news is that the seal is a relatively inexpensive component, but note that replacing it can be a labor-intensive job.

What common symptoms indicate you may need to replace the Camshaft Seal?

  • Oil leaking from behind the timing cover.
  • The leak will eventually damage the car’s timing belt or cause it to slip, which will in turn throw the entire combustion process off kilter: the engine will run rough, there will be a noticeable loss of power, overheating issues, stalling and backfiring, excess smoke pouring out of the exhaust, and more.

How important is this service?

Loss of oil could cause the engine to seize, and a leak could develop into a potential fire hazard as the mixes with dirt and other contaminants. Replace the camshaft seal sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Attila

19 years of experience
963 reviews
Attila
19 years of experience
Mercedes-Benz 400SEL V8-4.2L - Car starts and then dies - Union, New Jersey
First his did great job and finally he said the issue was ignition coil.

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Mercedes-Benz E350 V6-3.5L - Camshaft Seal - Cypress, Texas
Thanks!

Cody

8 years of experience
99 reviews
Cody
8 years of experience
Mercedes-Benz E350 V6-3.5L - Oil Change - Fort Worth, Texas
Very professional and friendly.

Wesley

13 years of experience
53 reviews
Wesley
13 years of experience
Mercedes-Benz ML350 V6-3.7L - Oil Change - San Antonio, Texas

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Is it Safe to Drive With One Hand?
According According to esure (http://www.esure.com/media_centre/archive/driving_one_hand.html), two million drivers have had an accident, or near accident while driving with just one hand. An academic report that came out in April of 2012 showed that driving with two hands is better than...
Cell Phones and Texting: Distracted Driving Laws in Alaska
The The distracted driving laws in Alaska are pretty relaxed when compared to other areas in the United States. In Alaska, the only definition of distracted driving is reading, sending, or receiving a text message. If you are caught text...
How to Replace a Brake Light Bulb
Brake lights are powered by bulbs which fail when the brake light is dimmer than usual, is slow to respond, or the Brake Warning Light comes on.

MISFIRE CYLINDER NUMBER 3

Hi There, There are several reasons that can cause a valve to burn. One is normal wear and tear. As miles are put on an engine, the constant pounding and heat erosion wears away the metal on the face of...

Dead battery then all warning lights on

You should first have the battery and cables checked for bad battery and corroded connections and if all okay then disconnect battery and then reconnect after making sure you have the radio code to turn it back on. Then see...

Jeep starts but won't move

Hi Connor. Thanks for contacting us today. In most cases when this occurs, it's due to a shift linkage or shift solenoid failure. It's also possible that you have damage to seals or gaskets inside the transmission case. The best...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com