Mercedes-Benz 300CE Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz 300CE Power Steering Pressure Hose Replacement is $255 with $101 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 300CEL6-3.2LService typePower Steering Pressure Hose ReplacementEstimate$372.04Shop/Dealer Price$429.36 - $585.71
1990 Mercedes-Benz 300CEL6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$664.78Shop/Dealer Price$774.39 - $1090.93
1992 Mercedes-Benz 300CEL6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$577.19Shop/Dealer Price$684.92 - $1000.05
1991 Mercedes-Benz 300CEL6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$664.78Shop/Dealer Price$774.46 - $1091.05
Show example Mercedes-Benz 300CE Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0

Shane

18 years of experience
379 reviews
Shane
18 years of experience
Mercedes-Benz 300CE L6-3.0L - Control Arm Assembly Replacement (Rear Lower Left, Rear Lower Right) - Austin, Texas
Punctual, professional, proficient, and positive.paradigm prognosticator.

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Mercedes-Benz GL450 V8-4.6L - Power Steering Pressure Hose - Gainesville, Georgia
Great service. Honest! Hard to find.

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Mercedes-Benz E320 L6-3.2L - Power Steering Pressure Hose - Vallejo, California
mr floyd was very friendly and fixed the problem right away, and also gave some good advice on how to maintain and keep my car running in good condition.

Michael

22 years of experience
391 reviews
Michael
22 years of experience
Mercedes-Benz CLK350 V6-3.5L - Power Steering Pressure Hose - Fontana, California
Great mechanic

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0
Number of Mercedes-Benz Power Steering Pressure Hose Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How the Parking Brake Works
A parking brake (also known as an emergency brake) is part of the vehicle’s braking system. You will see a...
How to Get a Car Loan When You Have No Credit
Let's Let's face it: cars don't come cheap. When you're just getting started out in college or at a new job, buying a car can seem like an insurmountable obstacle due to the high price tag attached. Your credit score...
P0822 OBD-II Trouble Code: Gear Lever Y Position Circuit
P0822 means there is a transmission range sensor issue. This could be due to the sensor not being adjusted correctly or it could be broken.

How do I get unstuck?

Most of us think that getting stuck is the province of trucks and SUVs driving off road, but that’s not always the case. Your car may get stuck in snow, mud or sand that’s washed over the road, or you...

Fuel Rail System Error Code

Considering that the code is related to a problem in the fuel system, you should leave it to the professionals to avoid personal injury. When fueling the car, check twice to make sure the fuel cap is fastened properly. Low...

All warning lights are on 2011 mitsubishi lancer es

Hi Raymond. Thanks for contacting us today. If a sensor that makes up the ABS or traction control system is unplugged or removed, it's common for the mechanic to download any stored OBD-II trouble codes after restarting the vehicle, removing...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com