Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.
Included for free with this service
Online Booking
Mechanic comes to you
12-month / 12k-mile warranty
Free 50 point safety inspection
Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.
On average, the cost for a Mazda Millenia Front Crankshaft Seal Replacement is $987 with $539 for parts and $448 for labor. Prices may vary depending on your location.
| Car | Service | Estimate | Shop/Dealer Price |
|---|---|---|---|
| 1996 Mazda MilleniaV6-2.3L Turbo | Service typeFront Crankshaft Seal Replacement | Estimate$2195.46 | Shop/Dealer Price$2561.55 - $3617.68 |
| 2000 Mazda MilleniaV6-2.5L | Service typeFront Crankshaft Seal Replacement | Estimate$1544.63 | Shop/Dealer Price$1819.86 - $2632.36 |
| 2000 Mazda MilleniaV6-2.3L Turbo | Service typeFront Crankshaft Seal Replacement | Estimate$1943.81 | Shop/Dealer Price$2249.64 - $3145.39 |
| 1995 Mazda MilleniaV6-2.5L | Service typeFront Crankshaft Seal Replacement | Estimate$1575.89 | Shop/Dealer Price$1859.01 - $2695.01 |
| 2002 Mazda MilleniaV6-2.3L Turbo | Service typeFront Crankshaft Seal Replacement | Estimate$1912.55 | Shop/Dealer Price$2218.22 - $3096.26 |
| 1999 Mazda MilleniaV6-2.5L | Service typeFront Crankshaft Seal Replacement | Estimate$1575.89 | Shop/Dealer Price$1859.46 - $2695.80 |
| 1995 Mazda MilleniaV6-2.3L Turbo | Service typeFront Crankshaft Seal Replacement | Estimate$2148.61 | Shop/Dealer Price$2505.72 - $3555.12 |
| 2001 Mazda MilleniaV6-2.5L | Service typeFront Crankshaft Seal Replacement | Estimate$1544.63 | Shop/Dealer Price$1819.94 - $2632.49 |
A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.
Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.
One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.
The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.
Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.
Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.
Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.
Fast and easy service at your home or office
Backed by 12-month, 12.000-mile guarantee
Real customer reviews from Mazda owners like you.
Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.
