Lexus RC350 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Lexus RC350 Car Battery Replacement is $296 with $156 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Lexus RC350V6-3.5LService typeCar Battery ReplacementEstimate$466.90Shop/Dealer Price$548.48 - $785.10
2017 Lexus RC350V6-3.5LService typeCar Battery ReplacementEstimate$457.89Shop/Dealer Price$537.70 - $773.00
2015 Lexus RC350V6-3.5LService typeCar Battery ReplacementEstimate$457.89Shop/Dealer Price$539.12 - $775.48
2016 Lexus RC350V6-3.5LService typeCar Battery ReplacementEstimate$457.89Shop/Dealer Price$539.12 - $775.48
2023 Lexus RC350V6-3.5LService typeCar Battery ReplacementEstimate$745.99Shop/Dealer Price$899.32 - $1351.82
2022 Lexus RC350V6-3.5LService typeCar Battery ReplacementEstimate$745.99Shop/Dealer Price$897.99 - $1349.49
2019 Lexus RC350V6-3.5LService typeCar Battery ReplacementEstimate$457.55Shop/Dealer Price$537.31 - $772.39
2021 Lexus RC350V6-3.5LService typeCar Battery ReplacementEstimate$457.89Shop/Dealer Price$537.72 - $773.04
Show example Lexus RC350 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Luis

30 years of experience
119 reviews
Luis
30 years of experience
Lexus RC350 V6-3.5L - Brake Pads Replacement (Front, Rear) - Schaumburg, Illinois
Luis was great. He arrived on time, worked efficiently and was very knowledgable.

Mitchel

25 years of experience
239 reviews
Mitchel
25 years of experience
Lexus RC350 V6-3.5L - Pre-purchase Car Inspection - Hialeah, Florida
Called me before and after the service was performed as requested. Highly recommend.

Jake

9 years of experience
21 reviews
Jake
9 years of experience
Lexus RC350 V6-3.5L - Oil Change - Gilbert, Arizona
Major Shou-Out to JP (Jake) Excellent customer service. Jake did a very detailed check-Up for my car and patiently explained to me my car’s condition. No more Lexus dealer trips for me.... Thanks Bro!!!

Scott

23 years of experience
49 reviews
Scott
23 years of experience
Lexus RC350 V6-3.5L - Brake Pads Replacement (Front) - Phoenix, Arizona
Major Shou-Out to Scott, Excellent customer service. Thanks for the suggestion regarding what needs to fix on my car.. No more Lexus dealer trips for me.... Thanks

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Lexus RC350 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

The Worst Cities to Break Down In
Here's where you'll find the highest car repair costs, worst public transportation, and congestion.
How to Buy a Good Quality Shifter Boot
Your Your shift boot is an important part in your car that is attached to our gear stick. This is what you use to shift gears, and it works as a great way to cover the gear assembly. It takes...
B1944 OBD-II Trouble Code: Airbag Crash Sensor #1 Ground Circuit Open
B1944 means there is a discrepancy in the airbag circuit in the poor ground on the #1 sensor, likely due to an open circuit in the crash sensor.

Coolant temperature overheats when driving

Hi, thanks for writing in. This can be caused by a number of things such as low coolant levels, a faulty thermostat (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-thermostat), or a failing coolant fan switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-thermo-coolant-fan-switch). As you may know the coolant fan switch helps to...

My car starts and goes into gear but acts as though it is struggling to accelerate and then it just quit

This may be many different possibilities, however this sounds a bit like a faulty or dirty idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into...

Coolant temperature sensor issue

If the vehicle is not overheating and the check engine light is NOT "flashing", and there are no other outward indications of the engine malfunctioning, it is safe to drive the car until it is convenient for you to request...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com