Lexus GS300 Car idle is rough Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(213)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(213)

Car idle is rough Inspection Service

How much does a Car idle is rough Inspection cost?

On average, the cost for a Lexus GS300 Car idle is rough Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Lexus GS300L6-3.0LService typeCar idle is rough InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2002 Lexus GS300L6-3.0LService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2005 Lexus GS300L6-3.0LService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1994 Lexus GS300L6-3.0LService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2004 Lexus GS300L6-3.0LService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2006 Lexus GS300V6-3.0LService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1999 Lexus GS300L6-3.0LService typeCar idle is rough InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2018 Lexus GS300L4-2.0L TurboService typeCar idle is rough InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Lexus GS300 Car idle is rough Inspection prices

A rough idling engine can be caused by a number of issues, some of them are serious while others tend to be minor, but the symptoms remain pretty much the same. The car will feel rough and bouncy when the engine is running. The car will also idle below its regular speed, display inconsistent RPMs and may produce a shaking, skipping or slipping sound when the vehicle is running.

While a rough idling engine may seem to be a simple inconvenience it often indicates a deeper problem within the engine. The vehicle should be inspected and repaired as soon as possible because small problems have a way of turning into expensive repairs.

How this system works:

The idle speed of an engine is basically the rotational speed the engine runs on when it is un-coupled from the drivetrain and the throttle pedal is not being depressed. The idle speed is measured in the revolutions per minute of the crankshaft.

When an engine is running at idle speed it generates enough power to smoothly operate equipment such as the water pump, alternator, and power steering but not enough power to move the vehicle itself. A passenger car will usually idle between 600 RPMs and 1000 RPMs. A properly functioning idle should run smoothly without skipping or slipping.

Common reasons for this to happen:

  • Dirty Fuel Injectors: The fuel injection system injects fuel into the cylinders, which creates a mix of air, and fuel to ignite and burn. Fuel injectors have tiny nozzles to spray the fuel into the cylinder and they can become clogged over time.

A clogged or failing fuel injector creates a lack of fuel in the vehicle's engine. This can cause a rough idle, it can also cause symptoms such as slow acceleration or the car not feeling as if it has enough power. If the problem is addressed early, it is possible to clean the injectors, which will restore them to full function. If this condition is not addressed in a timely manner the injectors will need to be replaced.

  • Incorrect Idle Speed: While the average idle speed falls between 600 to 1,000 RPMs, if your vehicle is experiencing a rough idle it could be due to an incorrect idle speed setting. A trained mechanic can easily adjust the idle speed, and it should stay at the proper speed. If an adjusted idle speed becomes inconsistent or changes at random intervals there may be a bigger problem that needs to be explored.

  • Vacuum Leak: If the vacuum system has a leak, it can seriously affect the ability of the vehicle’s computer to regulate the air to fuel ratio. This can lead to a rough idle and if the problem is not addressed the car may experience slow acceleration and a lack of power. Vacuum leaks should be inspected and repaired immediately.

  • Incorrectly Installed or Damaged Plugs: Spark plugs are responsible for creating the spark that allows the vehicle to burn fuel. If spark plugs are improperly installed or malfunctioning, the idle speed can be affected. The vehicle's engine may vibrate or there may be slipping or straining sounds coming from the engine.

  • Defective or Clogged Fuel Pump: A rough idle can be related to fuel delivery issues. The fuel pump, which is responsible for pulling fuel from the gas tank to the fuel injectors, can become clogged or defective. If this happens the engine will not get enough fuel, which can cause a rough idle, sputtering, stalling and even slow acceleration.

  • Clogged Fuel Filter: A clogged fuel filter can cause similar problems. The job of the fuel filter is to screen out contaminants in the fuel, over time it will become clogged and need to be replaced. A rough idle is one symptom of a clogged fuel filter.

  • Failing Electrical Components: A problem or failure in the ignition system or various electronic components can cause a rough idle. If this is the case, the problem will usually get worse as RPMs increase. Common culprits include the ignition control module, plug wires, coils, and spark plugs.

  • Defective Airflow Sensor: A defective airflow sensor can be responsible for a rough idle. A mass airflow sensor detects the amount of air coming into the fuel injection system and sends that information to the vehicle's computer. The computer uses that data to deliver the proper amount of fuel to the air in the vehicle. Over time these sensors can malfunction or become dirty. One of the first symptoms of a malfunctioning airflow sensor is a rough idle. The car may also accelerate slowly and even stutter or stall as the problem progresses.

  • Dirty Oxygen Sensor: Oxygen sensors measure how rich or lean the gases are as they exit the combustion chamber. Depending on the results, the amount of fuel entering the engine is adjusted by the vehicle computer. The ultimate goal is to maintain an ideal mixture that produces the lowest emissions. A dirty or failing oxygen sensor will usually trigger the check engine light and can lead to a rough idle, lower fuel efficiency and failed emission test.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the rough idle issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car for leaks and defective parts. This includes airflow sensors, fuel pump, electronics and other important components related to your car's idling state. It may be necessary to crank the car and test drive it in order to verify the problem and provide an accurate diagnosis.

How important is this service?

A rough idling car is more of an inconvenience at first but if the problem is not solved it can quickly lead to bigger problems such as slow acceleration, stalling and eventually a vehicle that will not start at all. Most of these conditions can make the vehicle dangerous to drive. A rough idle should be inspected and repaired as quickly as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(213)

Rating Summary
198
11
2
0
2
198
11
2
0
2

David

34 years of experience
67 reviews
David
34 years of experience
Lexus GS300 L6-3.0L - Battery Terminal Ends - Vallejo, California
He did a great Job! He kept us informed when he would arrive.

Ben

41 years of experience
1433 reviews
Ben
41 years of experience
Lexus GS300 V6-3.0L - Brakes, Steering and Suspension System - Houston, Texas
Ben, was very pleasant, very quick and very knowledgeable. We have been looking for a mechanic for our car and this service, this mechanic was the perfect find! So glad we tried this device and got Mr. Ben Smith!!

Mark

11 years of experience
349 reviews
Mark
11 years of experience
Lexus GS300 L6-3.0L - Ap sensor - San Jose, California

Collins

12 years of experience
512 reviews
Collins
12 years of experience
Lexus GS300 L6-3.0L - Alternator - Atlanta, Georgia
Collins was very professional, on time and very knowledgeable. I am more than satisfied with his service. This was my first time using this service and would definitely recommend it.

Excellent Rating

(213)

Rating Summary
198
11
2
0
2
198
11
2
0
2
Number of Lexus GS300 services completed
2343+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Clutch Master Cylinder
The The master cylinder in a manual transmission system functions similarly to the brake master cylinder, and in fact, both systems use brake fluid to lubricate the interior components and provide the pressure necessary to operate the other elements of...
P2504 OBD-II Trouble Code: Charging System Voltage High
P2504 P2504 code definition The P2504 OBD-II fault code simply means that an irregularity was detected in the charging system circuit - specifically that the voltage was high. This high voltage reading may have originated from the battery, charging system,...
P0897 OBD-II Trouble Code: Transmission Fluid Deteriorated
P0897 means the engine control module has detected that the transmission fluid is deteriorated, possibly due to low or dirty fluid levels.

VW passat 2006 running car stopped all on a sudden. Battery full power, fuel > half tank, Fuel pump ok,mass flow no blocks

The place to begin when a car won't start is to figure out what is missing. An internal combustion motor needs fuel, proper fuel pressure, spark, correct cam timing and compression to run. Here are some items you will need:...

Coolant coming out the cap causing smoking when driving i dont know why

Hi there: The smoke that you're seeing is evaporated steam caused by an overheating situation (https://www.yourmechanic.com/article/what-causes-a-car-to-overheat). This could be caused by several mechanical issues going on inside your car such as a coolant leak (https://www.yourmechanic.com/services/coolant-is-leaking-inspection), an obstruction in the coolant...

I need the measurements for brake/shoe pads left and right front and rear wheels

Hi there, thanks for writing in. I have always recommended brakes to be replaced if the pads are worn down (https://www.yourmechanic.com/article/how-to-recognize-brake-pad-wear-patterns-by-cheryl-knight) to 4/32 of an inch and the rear brake shoes worn down at its thinnest point to be 3/32....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com