Land Rover Range Rover Evoque Check Engine Light is on Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Check Engine Light is on Inspection Service

How much does a Check Engine Light is on Inspection cost?

On average, the cost for a Land Rover Range Rover Evoque Check Engine Light is on Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
* Land Rover Range Rover EvoqueL4-2.0L Turbo HybridService typeCheck Engine Light is on InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2012 Land Rover Range Rover EvoqueL4-2.0L TurboService typeCheck Engine Light is on InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2014 Land Rover Range Rover EvoqueL4-2.0L TurboService typeCheck Engine Light is on InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2021 Land Rover Range Rover EvoqueL4-2.0L TurboService typeCheck Engine Light is on InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2022 Land Rover Range Rover EvoqueL4-2.0L Turbo HybridService typeCheck Engine Light is on InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2018 Land Rover Range Rover EvoqueL4-2.0L TurboService typeCheck Engine Light is on InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Land Rover Range Rover EvoqueL4-2.0L TurboService typeCheck Engine Light is on InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2015 Land Rover Range Rover EvoqueL4-2.0L TurboService typeCheck Engine Light is on InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Land Rover Range Rover Evoque Check Engine Light is on Inspection prices

The Check Engine Light can be one of the most confusing warnings in your dashboard cluster because it offers no explanation as to why you suddenly need to check your engine. It sounds ominous and can be as serious as a malfunctioning catalytic converter or as trivial as a loose gas cap.

How this system works:

The Check Engine Light location and color will vary by vehicle, but in most cases it is a dashboard warning light that is yellow and shaped like an engine. It may or may not have the word “check” integrated into the design.

This indicator is part of the onboard diagnostics (OBD-II) system and in all cases it indicates a problem with your emissions system. Basically, it is an emissions monitoring system. A Check Engine indicator will stay solid or blink.

  • If the indicator is blinking, the situation is usually serious, such as a severe misfiring of the engine. This would allow unburned fuel to dump into the exhaust system, pushing the temperature of your catalytic converter to the breaking point. Slow the car down, find a safe place to stop, and request a mechanic to perform a diagnosis.

  • A steady light on the other hand is not an emergency situation. You can continue driving, but you should schedule an appointment with a mechanic as soon as possible.

Common reasons for this to happen:

While a Check Engine Light can come on for a number of reasons, in most cases it is due to one of the following issues:

  • Loose or damaged gas cap: It’s hard to believe that a gas cap can prompt your check engine light to come on, but it can. Your gas cap acts as the seal for your fuel system and it helps maintain the pressure in your fuel tank. A loose or damaged cap can reduce your gas mileage and increase emissions from your car.

When that annoying yellow light pops on, the first thing you should do is pull over and inspect your gas cap. If it is loose, a quick tighten could very well solve your problem. If it is damaged, head to your local auto parts store for a new one.

Once you have fixed the issue, continue driving to see if the check engine light turns off. If the light stays on, schedule an appointment with a mechanic.

  • Faulty oxygen sensor: An oxygen sensor monitors the exhaust for unburned oxygen, which indicates engine efficacy and the proper air-to-fuel ratio. If you have a faulty sensor, it will not provide the correct data to the onboard computer. The majority of vehicles have two to four sensors. The OBD II code will tell the mechanic which one is giving a reading that is outside of its parameters.

Deterioration of the precious metals inside the oxygen sensor affects the sensors’ ability to give an accurate reading. If you put off getting an oxygen sensor replaced, it will eventually damage your catalytic converter, which can be very costly to replace. Your best bet is to call a mechanic and get a proper diagnosis.

  • Failing catalytic converter: A catalytic converter helps reduce emissions in the exhaust gases. It converts the carbon monoxide and other harmful gases into less harmful emissions. A failing converter will negatively affect your gas mileage and when the damage becomes severe enough, your vehicle won’t go any faster when you push down harder on the gas pedal.

In most cases, a catalytic converter will not fail if you properly maintain your car. A failing converter can be the result of a faulty oxygen sensor that has not been replaced or any other engine efficacy issue.

A broken catalytic converter will eventually bring your car to a complete stop. Before that, your gas mileage will be horrid, the car will not run smoothly, and the car will not pass an emissions test. A damaged converter should be replaced immediately.

  • Faulty mass airflow sensor: This part directs the computer in your vehicle to add the correct amount of fuel based on the air that is coming through the engine. When a mass airflow sensor starts to fail, the car will stall, it will idle poorly, the emissions will go up, and your gas mileage will go down.

An air filter that has never been replaced or improperly installed can sometimes be the culprit when it comes to a faulty mass airflow sensor. Have your air filter checked and replaced on a yearly basis.

While it is possible to drive for months with a malfunctioning mass airflow sensor, it’s not a good idea. Your gas mileage will drop and the car will start stalling frequently. It is best to call a mechanic and have the sensor diagnosed and replaced if necessary.

  • Bad spark plugs and wires: A spark plug acts as a seal in the combustion chamber and provides the gap for the spark that causes combustion in the engine.


While newer cars can go 100,000 miles on a set of plugs, older vehicles, especially those built before 1996, require new plugs roughly every 30,000 miles. There is no way to prevent plugs from failing, it just happens over time. If spark plugs are your issue, get them replaced immediately. A mechanic can make quick work of the job and new plugs in most cases are very affordable.

What to expect:

A top-rated mobile mechanic will come to your home or office to identify the source and cause of the illuminated Check Engine Light, and then check other system components as specific symptoms and issues are identified.

After the inspection, the mechanic will provide a detailed report that describes the diagnosis, along with the scope and cost of the necessary repairs.

How it's done:

When the Check Engine Light is on, your car’s monitoring system will have "fault codes" that indicate the nature of the problem. Your car may have one or more problems and hence there can be multiple codes.

The mechanic will read the codes using a scanner, interpret the codes, and provide a diagnosis. If you approve the repair estimate, they will replace the faulty part(s), clear the memory of any fault codes, turn the Check Engine Light off, and let you drive the car for a few days to see if the light comes back on or not.

Please note: It may take several days of driving the car for the monitoring system to verify that the repair has fixed all the problems. If the monitoring system fails any of its internal tests, it will turn the light back on. This means that the car has more problems that were not evident during the first evaluation. The mechanic will have to perform further diagnosis and create new repair estimates for resolving the problems found. In some rare cases, multiple visits may be required to diagnose and resolve the stubborn Check Engine Light issues.

How important is this service?

A blinking Check Engine Light indicates a critical issue, whereas a solid light reflects a non-emergency situation. Once you rule out a loose gas cap, it’s imperative a mechanic diagnoses the issue as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Michael

36 years of experience
69 reviews
Michael
36 years of experience
Land Rover Range Rover Evoque L4-2.0L Turbo - Check Engine Light is on - San Antonio, Texas
Amazing mechanic! Very personable and tells you everything he is doing and has done. He explains everything and gives great tips to keep vehicle working great.

Brian

23 years of experience
658 reviews
Brian
23 years of experience
Land Rover Range Rover Evoque L4-2.0L Turbo - Check Engine Light is on - Neptune Beach, Florida
Professional, knowledgeable, fantastic!!! We are thrilled with Brian and hope to have him service all our vehicles from now on.

Keith

18 years of experience
370 reviews
Keith
18 years of experience
Land Rover Range Rover Evoque L4-2.0L Turbo - Check Engine Light is on - Bartow, Florida
He has knowledge on how to deal with Issues about my car.

Rose

6 years of experience
8 reviews
Rose
6 years of experience
Land Rover Range Rover Evoque L4-2.0L Turbo - Check Engine Light is on - Fort Lauderdale, Florida
Great

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Land Rover Range Rover Evoque Check Engine Light is on Inspection services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
500+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Wyoming
Right-of-way Right-of-way laws in Wyoming are in place so that people know who has to stop at an intersection, and who can proceed. The law does not specify who has the right of way, only who must give it in...
P2093 OBD-II Trouble Code: A Camshaft Position Actuator Control Circuit High Bank 2
P2093 P2093 code definition The P2093 code is a general OBD-II diagnostic trouble code indicating a fault with the “A” camshaft position actuator control circuit high bank 2. What the P2093 code means The camshaft position sensor “A” is indicating...
P2199 OBD-II Trouble Code: Intake Air Temperature Sensor 1 / 2 Correlation
P2199 P2199 code definition P2199 is a general OBD-II diagnostic trouble code indicating a malfunction with the intake air temperature sensor 1 / 2 correlation. This code may be seen with other intake air sensor codes. What the P2199 code...

Car cranks over but won't start - 1994 Toyota Camry

Hi there. If the Check Engine light is illuminated, the first thing to do is to retrieve any problem codes (https://www.yourmechanic.com/article/how-to-read-and-understand-check-engine-light-codes-by-jason-unrau) from the engine management system (yes, it has on-board diagnostics). If there is no Check Engine light, the problem...

New brake pads are making a repeating/clicking noise while in reverse.

The brake pads may not have been cleaned off good. The pads may need to be replaced if they got grease soaked. The brakes should be inspected for rotor burnish from the pads grease that was on the pads. You...

I have a 2006 Mustang and it will not start just make a clicking noise. 2006 Ford Mustang

Hello - your symptoms, primarily the dim headlights, indicate a weak battery (https://www.yourmechanic.com/question/my-alternator-by-katie-s) or poor battery cable connections. Check the battery cable connections for clean (no corrosion), tight connections. If using a jumper cable or battery provides successful startup, this...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com