Kia Sedona Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(393)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(393)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Kia Sedona Power Steering Pressure Hose Replacement is $232 with $92 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Kia SedonaV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$518.52Shop/Dealer Price$613.00 - $888.34
2004 Kia SedonaV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$395.65Shop/Dealer Price$449.50 - $605.68
2003 Kia SedonaV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$395.65Shop/Dealer Price$449.53 - $605.74
2007 Kia SedonaV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$509.51Shop/Dealer Price$602.25 - $876.28
2009 Kia SedonaV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$509.51Shop/Dealer Price$603.72 - $878.86
2002 Kia SedonaV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$395.65Shop/Dealer Price$449.71 - $606.05
2014 Kia SedonaV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$842.97Shop/Dealer Price$1019.09 - $1543.23
2010 Kia SedonaV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$509.51Shop/Dealer Price$602.25 - $876.28
Show example Kia Sedona Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(393)

Rating Summary
368
19
2
0
4
368
19
2
0
4

Scott

39 years of experience
607 reviews
Scott
39 years of experience
Kia Sedona V6-3.5L - Brake Pads Replacement (Rear) - Westminster, Colorado
Thank you for your quick and expert services

James

13 years of experience
233 reviews
James
13 years of experience
Kia Sedona V6-3.5L - Oil Change - Larkspur, California

Carlos

26 years of experience
122 reviews
Carlos
26 years of experience
Kia Sedona V6-3.8L - Car is not starting - Concord, California
Carlos, thank you for getting me back on the road and working so hard during this heat wave.1!!

Timothy

23 years of experience
107 reviews
Timothy
23 years of experience
Kia Sedona V6-3.8L - Alternator - Spanaway, Washington
Tim re-arranged his scheduled day off to put in new alternator that a new battery 2 days earlier did not solve problem. Very sincere and much appreciated to correct this as soon as possible.

Excellent Rating

(393)

Rating Summary
368
19
2
0
4
368
19
2
0
4
Number of Kia Sedona services completed
4323+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1100+
experts on our platform

Recent articles & questions

P3478 OBD-11 Trouble Code: Cylinder 10 Exhaust Valve Control Performance
What What the P3478 code means When starting your vehicle, and when the vehicle is operating under a heavy weight, the engine will work in V8 mode. But when driving conditions are light, the engine will disable 4 of the...
P0118 OBD-II Trouble Code: Engine Coolant Temperature (ECT) Sensor Circuit High Open Problem
P0118 code definition Engine Coolant Temperature (ECT) sensor circuit high open problem What the P0118 code means P0118 is the OBD-II generic...
Can a Loose Gas Cap Let Gas Leak Out of the Fuel Tank?
The The short answer is: yes ... kind of. What escapes out of a loose or faulty gas cap is gas vapor. Gas vapor rises off of the pool of gasoline in the tank and hangs around in the air....

cant figure out why right passenger side wheel wobbles when I hit 35-45 miles.

Try to put the the vehicle in neutral when you feel the vibration to see if the vibration goes away and comes back when put back in drive. If the problem goes away then you may have a defective axle...

This vehicles rpm is running at 2500 at 70 mph. The 4x4 & ABS light is on. Is it safe to drive it down the interstate ?

Vehicles are designed to operate with all their systems functioning in certain ways. When warning lights such as "4X4" or "ABS" are lit, there is a fault, or multiple faults in those systems preventing them from operating as they were...

Hesitation

You may have a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at idle. Since...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com