Jeep Scrambler Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Jeep Scrambler Power Steering Pump Replacement is $228 with $95 for parts and $133 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1982 Jeep ScramblerL6-4.2LService typePower Steering Pump ReplacementEstimate$775.05Shop/Dealer Price$942.56 - $1413.61
1984 Jeep ScramblerL6-4.2LService typePower Steering Pump ReplacementEstimate$747.05Shop/Dealer Price$914.59 - $1385.65
1981 Jeep ScramblerL4-2.5LService typePower Steering Pump ReplacementEstimate$587.97Shop/Dealer Price$715.74 - $1067.49
1983 Jeep ScramblerL6-4.2LService typePower Steering Pump ReplacementEstimate$747.05Shop/Dealer Price$914.55 - $1385.59
1981 Jeep ScramblerL6-4.2LService typePower Steering Pump ReplacementEstimate$747.05Shop/Dealer Price$914.61 - $1385.69
1984 Jeep ScramblerL4-2.5LService typePower Steering Pump ReplacementEstimate$587.97Shop/Dealer Price$715.74 - $1067.49
1985 Jeep ScramblerL4-2.5LService typePower Steering Pump ReplacementEstimate$340.23Shop/Dealer Price$402.61 - $556.40
1982 Jeep ScramblerL4-2.5LService typePower Steering Pump ReplacementEstimate$594.97Shop/Dealer Price$723.07 - $1075.07
Show example Jeep Scrambler Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0

Joseph

20 years of experience
640 reviews
Joseph
20 years of experience
Jeep Scrambler L6-4.2L - Car is not starting - South Jordan, Utah
Arrived on time but was unable to diagnose because I had an older vehicle. He was able to suggest possible fixes and put me in contact with my aftermarket fuel injection kit providers for possible help. Was extremely knowledgeable and upfront. Would recommend for newer vehicles.

Abdul

11 years of experience
419 reviews
Abdul
11 years of experience
Jeep Scrambler L6-4.2L - Water Pump - Atlanta, Georgia
Excellent

Matthew

26 years of experience
27 reviews
Matthew
26 years of experience
Jeep Scrambler L4-2.5L - Car is not starting - Edmonds, Washington
Matthew was on time and figured out the problem in a few minutes. He pulled the defective part and ordered a new one. Awesome!

Cesar

9 years of experience
292 reviews
Cesar
9 years of experience
Jeep Scrambler L4-2.5L - Ignition Switch - Edmonds, Washington
Great job!

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0
Number of Jeep Scrambler services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How Long Does a Parking Brake Warning Switch Last?
Your Your car is equipped with a parking brake that helps prevent the car from rolling when parked on a slope. This is a separate system from your primary brakes, and you must manually engage and disengage it each time....
How to Calculate the Value of a Salvaged Car
An unfortunate part of driving is the possibility of a collision that’s severe enough to write off your car as a total loss. While the most important concern in any collision is the safety of all the involved parties, you’re...
P2219 OBD-II Trouble Code: NOx Sensor Heater Control Circuit Low Bank 2
P2219 code means there is an abnormal reading within the NOx sensor circuit voltage often due too faulty fuel usage or defective sensors.

I just had the alternator replaced, but my car cuts off while driving.

If your vehicle is losing battery voltage (i.e. your battery light is on) the problem may be your battery. You have a new alternator, so if your battery is bad (https://www.yourmechanic.com/services/battery-is-dead-inspection), it won't hold the charge from the alternator. The...

Windshield wiper fluid of radiator as Chevy Volt

Hi Paula. Thank you for contacting us today. If windshield washer fluid has been added to the radiator, even a small amount - it should be flushed. Windshield washer fluid contains soap, which will expand and bubble rapidly when it...

I have a question....My car has been jerking and the check engine light comes on after a few days it goes off I got the light chec

You may have a bad fuel pressure sensor but will need to have fuel pressure checked for proper pressures since low pressure may cause misfire. Replace sensor and then see if it fixes problem and then go from there.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com