Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.
How A Diagnostic Works
Instantly book a certified mobile mechanic to come to you
Mechanic diagnoses the problem and quotes necessary repairs
Your vehicle is ready to go
Fair, upfront & transparent pricing for all services
Our certified mobile mechanics can come to you now.
On average, the cost for a Jeep Gladiator Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.
| Car | Service | Estimate | Shop/Dealer Price |
|---|---|---|---|
| 1967 Jeep GladiatorL6-3.8L | Service typeCar is not getting enough power Inspection | Estimate$114.99 | Shop/Dealer Price$124.99 - $132.49 |
| 1965 Jeep GladiatorL6-3.8L | Service typeCar is not getting enough power Inspection | Estimate$94.99 | Shop/Dealer Price$105.01 - $112.52 |
| 1967 Jeep GladiatorV8-5.3L | Service typeCar is not getting enough power Inspection | Estimate$94.99 | Shop/Dealer Price$105.01 - $112.52 |
| 1962 Jeep GladiatorL6-3.8L | Service typeCar is not getting enough power Inspection | Estimate$94.99 | Shop/Dealer Price$104.99 - $112.48 |
| 1968 Jeep GladiatorV8-5.3L | Service typeCar is not getting enough power Inspection | Estimate$94.99 | Shop/Dealer Price$105.02 - $112.55 |
| 1968 Jeep GladiatorL6-3.8L | Service typeCar is not getting enough power Inspection | Estimate$94.99 | Shop/Dealer Price$105.01 - $112.52 |
| 1969 Jeep GladiatorV8-5.3L | Service typeCar is not getting enough power Inspection | Estimate$99.99 | Shop/Dealer Price$109.87 - $117.28 |
| 2021 Jeep GladiatorV6-3.0L Turbo Diesel | Service typeCar is not getting enough power Inspection | Estimate$99.99 | Shop/Dealer Price$110.24 - $117.94 |
When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.
In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.
The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.
Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.
Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.
Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.
Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.
Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.
Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.
Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.
A top-Ârated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.
A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.
Fast and easy service at your home or office
Backed by 12-month, 12.000-mile guarantee
Real customer reviews from Jeep owners like you.
Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.
