Jeep FJ3 Shock Absorber Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(39)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(39)

Shock Absorber Replacement Service

How much does a Shock Absorber Replacement cost?

On average, the cost for a Jeep FJ3 Shock Absorber Replacement is $406 with $311 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1964 Jeep FJ3L4-2.2LService typeShock Absorber - Front ReplacementEstimate$829.07Shop/Dealer Price$1017.59 - $1560.65
1964 Jeep FJ3L4-2.2LService typeShock Absorber - Rear ReplacementEstimate$716.91Shop/Dealer Price$882.41 - $1356.36
Show example Jeep FJ3 Shock Absorber Replacement prices

What is the Shock Absorber all about?

Shock absorbers are attached to the vehicle body and suspension components. They are used to absorb road shock, providing a smooth ride. Most cars made after 1995 have shock absorbers in the back wheels and strut assembly in the front. Older cars and trucks may have shock absorbers at all four wheels.

Shock absorbers are basically cylindrical containers filled with gas or liquid. They are mounted from the suspension to the frame of the car. When you drive over a bump, the pistons inside the shocks move up and down against the liquid or gas.

Shock absorbers take a beating day after day, especially on bumpy roads. The gas or liquid will eventually leak, resulting in an unstable or rugged ride. With worn shock absorbers, it is possible that the tires could lose contact with the road and/or wear out prematurely.

Keep in mind:

Shock absorbers are always replaced in pairs (either both front or both rear).

How it's done:

  • Verify that the shock absorbers are bad.
  • Remove and replace the faulty shock absorbers.
  • Inspect the suspension system for any other worn or damaged parts.
  • Test drive vehicle.

Our recommendation:

It is a good practice to replace the shock absorbers every 35,000 miles. You can easily find out if you need new shocks by doing a bounce test. Go to the rear corner of your car and push down on the rear of the car. If your car bounces up and down a few times, it is time to change the shock absorbers.

What common symptoms indicate you may need to replace the Shock Absorber?

  • Unstable, bouncy ride.
  • Tires losing contact with the road.
  • Hard impact when you drive over a bump.
  • Leaking fluid.

How important is this service?

Shock absorbers exist at both rear wheels, and sometimes the front wheels as well. The shock absorbers attach the suspension to the body of your car, and feature pistons that are filled with gas or liquid. As your vehicle rides over the bumps and rough conditions of the road, the suspension is subject to a lot of shock. This shock moves the pistons, but the gas or liquid in the pistons helps absorb the impact, and lessen the shock that is then transferred to the body of the vehicle. As a result, the shock absorbers keep your ride relatively smooth and comfortable.

When the shock absorbers malfunction or leak, they will be unable to absorb any of the shock from the road, and all of the impact on the suspension will be transferred to the body of the car. This not only makes for an uncomfortable ride, but can also cause damage to numerous different components in your vehicle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(39)

Rating Summary
38
1
0
0
0
38
1
0
0
0

Richard

21 years of experience
237 reviews
Richard
21 years of experience
Jeep Wrangler L6-4.0L - Shock Absorber Replacement (Front, Rear) - Naples, Florida
Richard was prompt, thorough, patient and clean. He did an excellent job.

Juan

13 years of experience
41 reviews
Juan
13 years of experience
Jeep Grand Cherokee V8-4.7L - Shock Absorber Replacement (Front, Rear) - Discovery Bay, California
Excellent work and excellent custo.er rapport.

Eugenio

26 years of experience
133 reviews
Eugenio
26 years of experience
Jeep Wrangler L6-4.0L - Shock Absorber Replacement (Front, Rear) - Lorton, Virginia
Eugenio was great. Good communication prior to the job, was on time and did a great job in shorter time than anticipated. Would hire him again in an instant.

Casime

12 years of experience
56 reviews
Casime
12 years of experience
Jeep Grand Cherokee L6-4.0L - Shock Absorber Replacement (Front) - Gloucester City, New Jersey
Great as usual

Excellent Rating

(39)

Rating Summary
38
1
0
0
0
38
1
0
0
0
Number of Jeep Shock Absorber Replacement services completed
429+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

What Is the Best Way to Clean Car Mirrors?
Like Like the rest of your car, your car’s mirrors need to be clean and well maintained. If the glass is dirty or filmed over, your view to the rear and the sides is obstructed. What’s the best way to...
What Metal Is the Exhaust System Made From?
Exhaust Exhaust systems must be made from metal to provide the required durability and resistance to heating, cooling and exposure to the elements. However, there are many different types of metals (and grades of individual metals). There are also differences...
How Long Does an Air Pump Last?
In In decades gone by, exhaust systems were not all that complicated. Emissions controls were not a concern, and any gases that were spent during the operation of your car were simply vented through the manifold, into the exhaust pipe,...

Car stalling when turning on the AC.

A stalling vehicle when the AC or Defroster is activate indicates a problem with the compressor. It is either seized/hard to rotate or the AC refrigerant is overcharged preventing the compressor from turning. This will also put increased load on...

What size connecting rod bearing bearing do I need for a 2004 Toyota matrix xr 1.8L front wheel drive

You should look at the back of the original bearing for the size and part number. If you go to the dealer with your VIN number (https://www.yourmechanic.com/article/how-to-decode-a-vin-vehicle-identification-number-by-jason-unrau) and engine number you should get the correct one. Unless your engine is...

Mixing red coolant with green coolant

Hi Justin. Thanks for contacting us today. It's not recommended to mix red and green coolant, as the two different coolant mixtures have different maximum heat 'boiling points'. As coolant heats up, it expands. If it's not properly mixed with...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com