Jeep FJ3 Parking brake won't engage Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6,592)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6,592)

Parking brake won't engage Inspection Service

How much does a Parking brake won't engage Inspection cost?

On average, the cost for a Jeep FJ3 Parking brake won't engage Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1964 Jeep FJ3L4-2.2LService typeParking brake won't engage InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Jeep FJ3 Parking brake won't engage Inspection prices

Engaging your parking brake ensures that your car doesn’t roll when you park on a hill. This is important in a wide variety of situations, whether you’re parking at home and your driveway is angled, or you’re backing down a boat ramp to unload in the lake. If your parking brake won’t engage, then you’re relying solely on the transmission’s park setting to hold the vehicle in place, which is never a good thing. It could slip, and it could also cause damage to the transmission.

How this system works:

Most parking brakes are relatively simple affairs – really nothing more than a cable that attaches to the handle that sits between your front seats (or the parking brake pedal under the dash in some cars). Pulling the handle pulls the cable, which engages the parking brake assembly and pushes a pair of brake shoes into contact with the inside of the drum.

However, despite that simplicity, there are several things that could go wrong with your parking brake. The most common issue is simply that you need to adjust your brake shoes. However, there could be a problem with the cable (corrosion or wear, for instance), or there could be a problem with the handle itself, although this is rare.

Common reasons for this to happen:

  • Need to Adjust Brake Shoes: The single most common reason your parking brake won’t engage is a need to adjust the brake shoes. This requires removing the rear wheels, removing the drum, and then adjusting the wheel to spread the shoes apart. Both sides should be adjusted.

  • Cable Is Detached: Another potential reason here is that the cable may have come loose from one or both sides. The cable must attach to both rear brakes for your parking brake to work (if it attaches to just one side, the brake will engage but feel loose, and the car will roll on a hill).

  • Cable Is Loose at the Handle: A much less common problem is that the nut where the cable attaches under the handle is loose. If this happens, there will be slack in the cable, and pulling the handle will not engage the parking brake. This is most common after inexpert parking brake repairs.

  • Rusted Bell Crank: The bell crank is really nothing more than a lever that sits near the front of the parking brake assembly. These are prone to rusting, particularly if you don’t use your parking brake very often. If this is the case, your parking brake will not engage.

What to expect:

One of our experienced mobile mechanics will come to your home or office and inspect the entire parking brake system, from the handle to the bell crank, the cabling and the attachment points at the rear. The mechanic will also provide you with a full report that details the scope and cost of any necessary parts and repairs.

How it's done:

The mechanic will inspect all aspects of your parking brake, beginning with the handle or pedal in the cabin. The mechanic will also inspect the cables, the shoe condition and adjustment and other aspects of your parking brake system. It may be necessary to remove one or both rear wheels, as well as the brake drums (if your car has drum brakes). If your car has disc brakes, the caliper and rotor may need to be removed to inspect the parking brake shoes, which are located inside the built-in drum on the rotor itself.

How important is this service?

If your parking brake will not engage, it will not prevent you from driving, but it does make parking on an incline risky. It’s possible that the transmission will slip out of park, and the vehicle will roll down the slope. One of our mechanics can fully assess your parking brake and advise you on what is needed to repair it.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(6,592)

Rating Summary
6,251
185
36
24
96
6,251
185
36
24
96

Doug

34 years of experience
139 reviews
Doug
34 years of experience
Jeep Liberty V6-3.7L - Brake Pads Replacement (Front, Rear) - Murrieta, California
Great Guy and great mechanic. Answered all my questions.

Jason

24 years of experience
57 reviews
Jason
24 years of experience
Jeep Wrangler V6-3.8L - Transfer Case Fluid - Oklahoma City, Oklahoma
Came early, left the area clean and diagnosed another issue I was having with the car

Peter

25 years of experience
523 reviews
Peter
25 years of experience
Jeep Wrangler V6-3.6L - Car Thermostat Replacement - Tarzana, California
Peter was excellent. Showed up on time, told me exactly what the problem was, fixed it in the estimated time. I trusted him. And that's hard to find sometimes. Highly recommended.

James

30 years of experience
883 reviews
James
30 years of experience
Jeep Wrangler L6-4.2L - Starter - Orlando, Florida
On every count, James went above and beyond to not only take care of my current issue, but potentially diagnose future ones. There was absolutely no pressure and his attitude was accommodating and pleasant.

Excellent Rating

(6,592)

Rating Summary
6,251
185
36
24
96
6,251
185
36
24
96
Number of Jeep services completed
72512+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How Anti-Lock Brakes Work
An An anti-lock brake system (ABS) is a braking system that is made to allow a vehicle to maintain traction with the road when braking. Braking is controlled by driver input via the brake pedal, and older braking systems response...
P0374 OBD-II Trouble Code: Timing Reference High Resolution Signal A No Pulses
What What the P0374 code means The Powertrain Control Module (PCM) has discovered a problem in the high-resolution timing reference signal. What causes the P0374 code? There may be one or more causes for the P0374 code: A defective camshaft,...
What Does the AdBlue Warning (Low Level, No Restart, Malfunction) Warning Light Mean?
The AdBlue warning light usually means the diesel exhaust fluid is low, which will eventually prevent your engine from starting.

My car's engine heat indicator goes up within 1 to 2 minute after I starts car. What is the reason for engine gets hot too soon?

It sounds like the cooling system is not performing as it should be. This could be due to a low fluid level, a restriction in the system, or a faulty temperature sensor. I would recommend having the coolant level checked...

My check engine light came on and the it was diagnosed as op128 so I got gas screwed on my cap and my light turned off how is this

First, a trouble code P0128 (https://www.yourmechanic.com/article/p0033-obd-ii-trouble-code-turbo-charger-or-supercharger-bypass-valve-control-circuit-by-john-nelson) does have to do with coolant, but it is not the level. This code is set when the relationship between the coolant temperature sensor and the intake air temperature sensor don't increase at a...

I have a bad Serpentine Belt and need a replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com