Jeep FA-134 Car is not starting Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(710)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(710)

Car is not starting Inspection Service

How much does a Car is not starting Inspection cost?

On average, the cost for a Jeep FA-134 Car is not starting Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1960 Jeep FA-134L4-2.2LService typeCar is not starting InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Jeep FA-134 Car is not starting Inspection prices

A car that fails to start is a rare occurrence in this age of greatly improved efficiency and reliability. But it still happens occasionally, and the advanced electronic technologies that have made cars better have also made the job of roadside diagnosis difficult, if not impossible, for even reasonably handy owners. One of our expert mobile mechanics can provide an expeditious diagnosis and provide a quote for any necessary repairs.

Common reasons for this to happen:

If the engine cranks, but the car doesn't start:

  • Bad fuel pump: A faulty fuel pump won't deliver fuel to the engine, even if you've just filled up.

  • Bad spark plugs: Without hot sparks to ignite the fuel charge in each cylinder, there is no combustion and no expansion of the burning mixture. Thus, the engine will not start.

  • Bad timing belt: If the timing belt stretches or breaks, the engine will not run. Moreover, continuing to crank the engine may bring the valves into contact with the piston, causing serious engine damage.

  • Bad ignition coil: Without a functional coil to step up the voltage, there can be no spark. No spark means no start.

  • Faulty cam or crank sensor: If the sensors are faulty they will either provide no information to the ignition system, or will provide incorrect data. Either way, the engine will not fire.

If nothing happens after you turn the key:

  • Bad battery or terminals: Batteries have a finite lifespan, and terminals can loosen or corrode.

  • Bad starter: This should be obvious from the response to the key. If nothing happens at all when you turn the key, the starter may have reached the end of its life.

  • Ignition problem: This could be due to faulty contacts in the ignition switch, or in the wiring.

If there is a grinding noise when you turn the key:

  • Starter is bad: Do not persist in cranking the engine.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause of your car’s failure to start through a series of diagnostic procedures. You will receive an upfront, fair and transparent estimate for the necessary repairs. The mechanic will book a follow-up appointment to perform the repairs and will bring the required parts and tools. All repairs are covered by our warranty.

How it's done:

The mechanic will check the ignition system, fuel system, and charging system, and then look for any mechanical damage. The mechanic may also try an alternative fuel source, like a quick shot of brake or carburetor cleaner into the throttle body, or a quick shot of liquid fuel via a vacuum line. If the car starts momentarily and then dies, that indicates that you have a fuel delivery issue.

How important is this service?

It goes without saying that a non-starting car is an important issue to address. Do not ignore or abandon the car if it’s not starting; this is an issue that should be dealt with promptly. Book a mechanic to perform a thorough diagnostic as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(710)

Rating Summary
672
18
3
5
12
672
18
3
5
12

Richard

11 years of experience
265 reviews
Richard
11 years of experience
Jeep Liberty V6-3.7L - Car is not starting - Antioch, Tennessee
Super nice and knew what he was doing. Looking forward to him fixing it on Wednesday.

Carlos

16 years of experience
362 reviews
Carlos
16 years of experience
Jeep Wrangler L6-4.0L - Car is not starting - Southlake, Texas
Super nice guy. Very informative about my Jeep. What he was doing and other things that may need to be done.

Stefan

17 years of experience
367 reviews
Stefan
17 years of experience
Jeep Liberty V6-3.7L - Car is not starting - Vallejo, California
Stefan was timely thorough and very professional.

Chris

22 years of experience
2247 reviews
Chris
22 years of experience
Jeep Wrangler V6-3.6L - Car is not starting - Newport Beach, California
He was early, very professional, easily diagnosed the issue.

Excellent Rating

(710)

Rating Summary
672
18
3
5
12
672
18
3
5
12
Number of Jeep Car is not starting Inspection services completed
7810+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Electronic Control Relay
If your engine cranks but does not start or powers on but does not function, you may need to replace the electronic control relay.
Symptoms of a Bad or Failing Suspension Air Bag
Common signs include the rear feeling loose or spongy, a bouncy or rough ride, the air compressor running frequently, and sagging on one side.
How to Replace a Traction Control Switch
A traction control switch helps you keep control of your wheels on different surfaces. Signs of failure are a Check Engine Light or a broken switch.

dash and parking lights flicker on and off after turning off the car

Hi there: I'ts very common for an ignition cylinder to go bad over time and cause inconsistent operation of multiple electrical components including dash and parking lights. The best way to determine whether it's the ignition cylinder or assembly, or...

Truck stallsl out when put in gear 1988 Ford F150

Hi there - first task is to check for any problem codes. Your truck has OBD I diagnostics which, although not as precise as OBD II, can still be pretty helpful. Your poor cold start running (https://www.yourmechanic.com/question/poor-starting-when-cold-by-stephen-h) may be due...

How do i know if my voltage regulator is bad

This may be related to ether the alternator or the voltage regulator. I would suggest having the alternator (https://www.yourmechanic.com/services/alternator-replacement) checked to determine if it is receiving the proper amount of voltage from something called the voltage regulator. The voltage regulator...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com