Jeep Compass Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Jeep Compass Control Arm Assembly Replacement is $209 with $41 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Jeep CompassL4-2.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$648.86Shop/Dealer Price$768.90 - $1119.28
2010 Jeep CompassL4-2.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$316.26Shop/Dealer Price$339.87 - $404.08
2009 Jeep CompassL4-2.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$316.26Shop/Dealer Price$339.91 - $404.15
2010 Jeep CompassL4-2.4LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$638.28Shop/Dealer Price$742.43 - $1048.19
2009 Jeep CompassL4-2.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$638.28Shop/Dealer Price$744.79 - $1052.31
2014 Jeep CompassL4-2.4LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$363.88Shop/Dealer Price$399.66 - $499.78
2018 Jeep CompassL4-2.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$739.49Shop/Dealer Price$882.81 - $1307.72
2017 Jeep CompassL4-2.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$797.88Shop/Dealer Price$941.93 - $1367.39
Show example Jeep Compass Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Jeep Compass Control Arm Assembly Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Detect Odometer Fraud
When When you buy a vehicle, one of the influencing factors is how many miles are on the odometer. That simple number can give a good indication of several items including: An indication of upcoming maintenance and repairs How well...
How to Decide on a Roof Rack
You You may want to attach a roof rack (https://www.yourmechanic.com/article/4-essential-things-to-know-about-the-roof-rack-on-your-car) to the top of your car to transport luggage, kayaks or other equipment. Even a simple rack base can host many different attachments to hold bikes, skis, kayaks, surfboards, and...
How to Get Rid of Your Old Car
When your vehicle is no longer roadworthy, that doesn’t mean it isn’t worth any money. No matter how old or run down you vehicle might be, there’s still a chance to get money for it. There are a lot of...

changed electronic throttle body, wrench lights when stopping hard and taking off fast, lose power

Hi there. The wrench light is a service indicator light that is designed to alert the driver that routine service or maintenance is required. In some cases, this light is illuminated when excessive carbon is detected in the fuel system....

How can you check to see if one or more engine mounts are faulty? 2009 Honda Fit

Hi there - to detect a failed motor/transmission mount (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-engine-mount), a technician may use a jack or large pry bar to attempt to lift or move the engine/transmission to determine loose motion - indicating a failed mount. Some motor mounts...

Hello, my car's temperature isn't rising, so the ac isn't working, what do you think is the problem? Compressor, or Radiator?

The radiator is part of the engine cooling system and would not typically be inspected or serviced if the passenger compartment air conditioning system is not working. If the car engine is overheating you might inspect the radiator though. If...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com