Jeep Comanche Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Jeep Comanche Wheel Bearings Replacement is $117 with $22 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Jeep ComancheL6-4.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$214.05Shop/Dealer Price$241.31 - $291.61
1988 Jeep ComancheL6-4.0LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$186.05Shop/Dealer Price$213.34 - $263.65
1992 Jeep ComancheL6-4.0LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$198.89Shop/Dealer Price$229.39 - $289.33
1986 Jeep ComancheL4-2.1L Turbo DieselService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$148.05Shop/Dealer Price$171.31 - $218.60
1991 Jeep ComancheL4-2.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$198.89Shop/Dealer Price$229.41 - $289.37
1989 Jeep ComancheL6-4.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$139.13Shop/Dealer Price$160.18 - $200.80
1987 Jeep ComancheL6-4.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$193.05Shop/Dealer Price$220.15 - $270.32
1988 Jeep ComancheL4-2.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$193.05Shop/Dealer Price$220.67 - $271.23
Show example Jeep Comanche Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(9)

Rating Summary
8
0
0
0
1
8
0
0
0
1

Henry

34 years of experience
170 reviews
Henry
34 years of experience
Jeep Comanche L4-2.5L - Clear fluid is leaking - Blackwood, New Jersey
Prompt. Diagnosed the problem. Explained the solution clearly.

Horus

11 years of experience
122 reviews
Horus
11 years of experience
Jeep Comanche L6-4.0L - Serpentine/Drive Belt - San Antonio, Texas
knows his stuff.

Luis

12 years of experience
78 reviews
Luis
12 years of experience
Jeep Comanche L6-4.0L - Not able to change gears - Albuquerque, New Mexico
Luis showed up right on time and gave a clear, concise diagnosis.

Augie

31 years of experience
263 reviews
Augie
31 years of experience
Jeep Comanche L6-4.0L - Car is not starting - Santa Clarita, California
Augie was professional and courteous. I was nervous the issue wouldn't get solved because of older year of my vechicle, but he was able to figure out the problem in a timely manner. He put all my worries at ease. I appreciate him and all his efforts! Thank you, Augie!

Excellent Rating

(9)

Rating Summary
8
0
0
0
1
8
0
0
0
1
Number of Jeep Comanche services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Repair an Exhaust Pipe
Your Your vehicle’s exhaust system is made of the exhaust manifold, catalytic converter, resonator, muffler and of course the piping to connecting it all together. Throughout the day, your vehicle’s exhaust system (https://www.yourmechanic.com/article/tips-for-taking-care-of-your-exhaust-system) is constantly being exposed to various elements...
P0777 OBD-II Trouble Code: Pressure Control Solenoid B Stuck On
P0777 code means a fault was detected in either the electronic pressure control solenoids or solenoid circuits often due too failures or blockages.
10 Best GPS and Navigation Apps for Road Trips
Find your go-to road trip planner app or GPS device and start your next adventure.

Traction Control light on, crumbling at the front end

This vehicle has many technical bulletins that pertains to wiring issues with pins and connectors to various modules and control units (https://www.yourmechanic.com/article/what-is-a-vehicle-s-electrical-control-unit) in the vehicle. This issue is one that is hard to track down, since it is an intermittent...

After new battery and alternator, truck won't start

Hello! It sounds as if your have a parasitic drain present. I would have a technician perform a parasitic draw test (https://www.yourmechanic.com/article/how-to-diagnose-a-car-battery-drain_2) on the vehicle. It should be fairly easy to isolate the circuit that is draining the battery by...

My car was driving fine and then I went to turn into a parking lot and it stalled. I started it back up then it stalled again. In

An engine that starts and stalls can be caused by many things and you will need to have the computer and fuel pressure tested to isolate the cause by a mechanic like one from YourMechanic.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com