Jaguar XK Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(50)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(50)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Jaguar XK Power Steering Pressure Hose Replacement is $367 with $227 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Jaguar XKV8-4.2LService typePower Steering Pressure Hose ReplacementEstimate$671.78Shop/Dealer Price$809.98 - $1204.31
2008 Jaguar XKV8-4.2LService typePower Steering Pressure Hose ReplacementEstimate$662.77Shop/Dealer Price$796.55 - $1187.57
2011 Jaguar XKV8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$672.99Shop/Dealer Price$793.46 - $1139.19
2013 Jaguar XKV8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$781.79Shop/Dealer Price$929.45 - $1356.78
2010 Jaguar XKV8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$752.83Shop/Dealer Price$898.78 - $1308.53
2012 Jaguar XKV8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$741.95Shop/Dealer Price$880.18 - $1278.02
2015 Jaguar XKV8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$878.95Shop/Dealer Price$1050.96 - $1551.20
2009 Jaguar XKV8-4.2LService typePower Steering Pressure Hose ReplacementEstimate$735.77Shop/Dealer Price$871.93 - $1264.74
Show example Jaguar XK Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jaguar mechanics

Real customer reviews from Jaguar owners like you.

Excellent Rating

(50)

Rating Summary
47
1
0
1
1
47
1
0
1
1

Pedro

32 years of experience
120 reviews
Pedro
32 years of experience
Jaguar XK V8-4.2L - Serpentine/Drive Belt Replacement - Chicago, Illinois
Did a excellent job despite all of the set backs. Excellent mechanic!

RYAN

6 years of experience
103 reviews
RYAN
6 years of experience
Jaguar XK V8-4.2L - Headlight Bulb Replacement (Passenger Side High Beam) - San Antonio, Texas
Once again, Ryan was on time and quickly dealt with the headlight bulb replacement on my Jaguar. Gave me valuable tips.

Emmette

37 years of experience
282 reviews
Emmette
37 years of experience
Jaguar XK V8-4.2L - Brake Light Bulb Replacement (Driver Side, Passenger Side) - Alexandria, Virginia
My first experience with Your Mechanic. Emmette showed up on time. performed the job as I expected without waiting hours at the dealership. Excellent service. I totally pleased and a happy customer.. Your Mechanic is a great service!

Carlos

29 years of experience
601 reviews
Carlos
29 years of experience
Jaguar XK V8-4.2L - Battery - La Habra, California
Carlos is very knowledgeable, professional and personable. He swiftly completed the work, but chatted with me enough to make me feel comfortable and competent in his work. I would definitely request Carlos for any future work that I might need to my vehicle.

Excellent Rating

(50)

Rating Summary
47
1
0
1
1
47
1
0
1
1
Number of Jaguar XK services completed
550+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jaguar MECHANICS
500+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Brake Hose
If your car's brake pedal feels mushy, the brake hose looks damaged, or if your brakes stop working, you may need to replace the brake hose.
How Long Does a Steering Rack/Gearbox Last?
When When you turn the steering wheel, the two front wheels also turn in the direction you want. It actually takes a lot of different components to translate the rotational movement of the steering wheel into side to side movement...
How Long Does a Lateral Link Last?
In In order for a car to ride and handle like it is supposed to, the suspension system will have to be working properly. There are a variety of different components that are located in a car’s suspension system. While...

Engine waterlogged

There is a possibility that your vehicle's engine took on water, or the electrical system has failed. In the event of a flood, it is a hard decision to make at times, but the vehicle must be shut off immediately....

Truck not shifting out of Park

The shift lock requires the brakes to be pushed in order to get the vehicle out of Park. The brake lights need to be checked to see if they work; the brake switch and wire connector to the switch may...

Engine knocks, tailpipe blows white smoke

Hello. There are a few things that can cause this. If the smoke is white then you may have a blown head gasket. This is a common failure on this vehicle, especially if it has ever overheated. If the smoke...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com