Infiniti Q70 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Infiniti Q70 Control Arm Assembly Replacement is $512 with $344 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Infiniti Q70V6-3.5L HybridService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$997.84Shop/Dealer Price$1182.40 - $1707.73
2016 Infiniti Q70V8-5.6LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$979.82Shop/Dealer Price$1158.20 - $1678.89
2016 Infiniti Q70V6-3.7LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$979.82Shop/Dealer Price$1158.29 - $1679.05
2015 Infiniti Q70V8-5.6LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$979.82Shop/Dealer Price$1158.28 - $1679.04
2016 Infiniti Q70V6-3.5L HybridService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1356.20Shop/Dealer Price$1633.91 - $2440.82
2016 Infiniti Q70V6-3.7LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$979.82Shop/Dealer Price$1158.77 - $1679.90
2016 Infiniti Q70V6-3.7LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$979.82Shop/Dealer Price$1158.34 - $1679.14
2014 Infiniti Q70V6-3.7LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1356.20Shop/Dealer Price$1628.76 - $2431.80
Show example Infiniti Q70 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Helder

33 years of experience
28 reviews
Helder
33 years of experience
Infiniti Q70 V6-3.7L - Banging noises when driving over the bumps Inspection - Smithfield, Rhode Island
Helder was punctual, pleasant and very patient when I was delayed in getting to him. He diagnosed the issue quickly. Easy to work with.

Fred

18 years of experience
389 reviews
Fred
18 years of experience
Infiniti Q70 V6-3.7L - Brake Pads Replacement (Rear) - Porter, Texas
Fred was great did not try to charge for services that were not needed!! Another great experience.

Omar

13 years of experience
287 reviews
Omar
13 years of experience
Infiniti Q70 V6-3.7L - 50 Point Inspection - Fort Lauderdale, Florida
Excellent!

Henry

35 years of experience
177 reviews
Henry
35 years of experience
Infiniti Q70 V6-3.7L - Car is not starting Inspection - Woodbury, New Jersey
He fixed my car right away. Pleasant, knowledgeable mechanic.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Infiniti Q70 services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Remove Tar from Your Car
Tar is a black, sticky substance that comes from asphalting on the road. A solvent-based spray or a few household items can be used to remove it.
P0051 OBD-II Trouble Code: HO2S Heater Control Circuit Low (Bank 2 Sensor 1)
P0051 P0051 code definition HO2S Heater Control Circuit Low (Bank 2 Sensor 1) What the P0051 code means This code is set when the car’s computer, or Engine Control Module (ECM), detects low system voltage in the heater control circuit....
How to Replace a Lost or Stolen Car Title in West Virginia
It It can be very frustrating to lose things, so what happens when that lost item is your car title? Maybe you don't remember losing it, maybe it was stolen. No matter how it managed to disappear, if you no...

Vibration while stopped when engine under load (AC + full wheel lock); more noticeable w/ cold engine

This may potentially be a poor engine running condition such as a lack of fuel delivery which could cause it to run poorly resulting in vibration. Are there any check engine lights on? If so, I would recommend having the...

P0300 code random misfire code

Hi. Several components could cause this problem - old, failing plug wires (https://www.yourmechanic.com/services/ignition-cable-spark-plug-wires-replacement), old plugs with wide gaps (https://www.yourmechanic.com/services/spark-plugs-replacement), worn or corroded distributor cap or rotor (https://www.yourmechanic.com/services/distributor-rotor-and-cap-replacement) contacts, failing distributor pickup coil issues, or failing ignition coil packs (https://www.yourmechanic.com/services/ignition-coil-replacement). Diagnosis...

My 2012 Scion tC will over rev when I'm trying to accelerate.

If your clutch is slipping (https://www.yourmechanic.com/article/how-can-i-tell-if-my-clutch-is-slipping) you will be able to hear the engine rev, and the tachometer rise without any apparent acceleration of the car. It tends to happen in the higher gears because that is when the load...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com