Honda Civic Distributor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Distributor Replacement Service

How much does a Distributor Replacement cost?

On average, the cost for a Honda Civic Distributor Replacement is $425 with $285 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Honda CivicL4-1.6LService typeDistributor ReplacementEstimate$907.46Shop/Dealer Price$1099.18 - $1666.22
1997 Honda CivicL4-1.6LService typeDistributor ReplacementEstimate$730.41Shop/Dealer Price$878.35 - $1318.04
2000 Honda CivicL4-1.6LService typeDistributor ReplacementEstimate$730.41Shop/Dealer Price$878.37 - $1318.08
1996 Honda CivicL4-1.6LService typeDistributor ReplacementEstimate$730.41Shop/Dealer Price$878.37 - $1318.08
1993 Honda CivicL4-1.6LService typeDistributor ReplacementEstimate$715.99Shop/Dealer Price$861.82 - $1291.82
1995 Honda CivicL4-1.5LService typeDistributor ReplacementEstimate$861.98Shop/Dealer Price$1008.48 - $1438.97
1991 Honda CivicL4-1.6LService typeDistributor ReplacementEstimate$898.45Shop/Dealer Price$1088.44 - $1654.19
1999 Honda CivicL4-1.6LService typeDistributor ReplacementEstimate$730.41Shop/Dealer Price$878.37 - $1318.08
Show example Honda Civic Distributor Replacement prices

What is a distributor and how does it work?

The distributor is an electro-mechanical component installed in a car’s ignition system to provide, time, and “distribute” the spark that occurs at each spark plug in an engine’s combustion cylinders. The distributor contains a rotating shaft with a gear at the bottom that engages a gear on the engine’s camshaft. Atop the shaft is a plastic rotor that has electrical contacts molded in. As the plastic rotor turns, it completes a high voltage circuit to each electrical contact, one per engine cylinder, that is molded into a plastic distributor cap. That high voltage then flows along the spark plug wire to the spark plug, creating the spark that ignites the air-fuel mixture in an engine cylinder.

Distributors vary in design: some may have the ignition coil built in, some have vacuum advance mechanisms attached for engine timing, and really old distributors may even have mechanical points. Vintage cars, that is cars older than 25 years, will more commonly be equipped with a distributor. Most modern car designs have replaced the distributor with fully electronic systems controlled by engine sensors for more precise, and more powerful, ignition system operation.

When to consider replacing the distributor:

  • Worn or damaged integral parts. Worn shaft bushings can result in wobbling or eccentric rotation of the rotor, resulting in misfires, loss of power, rough idle and poor mileage. If the shear pin breaks that secures the distributor shaft drive gear, complete loss of ignition spark distribution is the result. A failed ignition module that is mounted to the distributor housing may also be more cost-performance efficient to replace the entire distributor.
  • Visible oil leaks. Distributors are attached to the engine and consequently, there are seals, both internal and external, that keep oil from leaking at the point of attachment. External O-rings are serviceable but if an internal oil leak occurs, due to a worn shaft, for example, it might necessitate rebuilding or replacing the distributor.

How do mechanics replace the distributor?

Distributors are bolted to the engine block or the cylinder head. The replacement procedure is as follows:

  • Once all diagnostic tests are complete and the distributor is confirmed to be faulty, disconnect the battery negative cable.
  • Set engine at top dead center on the compression stroke for cylinder no. 1. Mark location of distributor housing and shaft relative to the engine mounting surface.
  • Remove primary and secondary ignition system wiring connected to the distributor. Unbolt and remove the distributor. Temporarily cover the hole in the head or block so no foreign matter drops into the engine.
  • Install new distributor and new cap and rotor, with the rotor pointing to the cylinder no. 1 firing-order electrode of the distributor cap. Reconnect all wiring and reconnect battery negative cable.
  • Start engine and set basic engine ignition timing per original equipment manager specification. Then check timing advance for proper function. Road test vehicle.

Is it safe to drive with a distributor problem?

Yes. A faulty distributor will cause increased fuel consumption, increased emissions and poor engine operation but does not generally create a safety hazard.

When replacing a distributor keep in mind:

  • Many ignition system failures will mimic a distributor failure, including faulty spark plugs, faulty wiring, and a worn cap and rotor. Mechanics will always test the distributor directly to ensure it is not needlessly replaced.
  • If a distributor is removed for testing and then re-installed, be sure that new o-rings are installed. Re-using old o-rings often results in oil leaks.
  • If the distributor is replaced, and the spark plugs and spark plug wires have considerable mileage on them, the best results will be obtained by replacing those components at the same time the new distributor is installed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(18)

Rating Summary
16
1
0
0
1
16
1
0
0
1

David

0 years of experience
736 reviews
David
0 years of experience
Civic 1995 - Distributor - Vallejo, CA
Very impressed with his ability to fix my car

Nicholas

15 years of experience
439 reviews
Nicholas
15 years of experience
Civic 1995 - Distributor - Denver, CO
Was a super nice guy and took some extra time to chat about my car after the work was done. Liked him so much I already booked another appointment for tomorrow!

James

25 years of experience
733 reviews
James
25 years of experience
Civic 1995 - Distributor - Buena Park, CA
Once again, James shows up on-time, fixes the issue, and helps me out by doing small extra tasks I was asking him, like where to leave my keys, etc. as I had to go to the Doctors Office. Really cool dude, would recommend to anyone and everyone.

Darnell

19 years of experience
5 reviews
Darnell
19 years of experience
Civic 2018 - Car is not starting - Los Angeles, CA
fast & efficient service

Excellent Rating

(18)

Rating Summary
16
1
0
0
1
16
1
0
0
1
Number of Honda Civic Distributor Replacement services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

P2403 OBD-II Trouble Code: EVAP Leak Detection Pump Sense Circuit/Open
Diagnostic Diagnostic Trouble Code (DTC): P2403 P2403 code definition EVAP Leak Detection Pump Sense Circuit/Open Related Trouble Codes: P2404: EVAP Leak Detection Pump Sensor Circuit Range/Perf P2405: EVAP Leak Detection Pump Sensor Circuit Low P2406: EVAP Leak Detection Pump Sensor...
P0440 OBD-II Trouble Code: Evaporative Emission Control System Malfunction
P0440 P0440 code definition Evaporative Emission Control System Malfunction What the P0440 code means P0440 is an OBD-II generic code that the engine control module (ECM) has detected a leak in the fuel tank vapor system or a vapor pressure...
The Traveler’s Guide to Driving in Tunisia
Tunisia Tunisia is a beautiful country with an interesting history. It’s a popular place to visit, and many of the attractions (https://www.tripadvisor.com/Attractions-g293753-Activities-Tunisia.html) in the country are historical in nature. Some of the places you may want to visit include El...

When raining, brakes grind first few stops and then clear up

The brake pads have metal in them, and the rotors are made of metal, and when it rains they get wet and surface rust will immediately start to rust the rotors. As soon as you start to drive off, the...

My door locks quit working

Hi there! Most likely your door lock actuators have gone bad. Inspect (https://www.yourmechanic.com/services/power-door-locks-are-not-working-inspection), the system by pressing the lock\unlock switch, watch the locks and see if there is any movement, like they are trying to lock\unlock. If you do in...

CEL code P1101, Air intake system

Hi there. It may be time to find another repair facility. The P1101 code is the MAF (mass airflow) sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) is out of self-test range. This means the voltage parameters the PCM (powertrain control module)/computer expects to see for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com