GMC Sierra 1500 Classic Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a GMC Sierra 1500 Classic Front Crankshaft Seal Replacement is $371 with $49 for parts and $322 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 ClassicV8-5.3L HybridService typeFront Crankshaft Seal ReplacementEstimate$455.12Shop/Dealer Price$488.06 - $568.23
2007 GMC Sierra 1500 ClassicV6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$435.24Shop/Dealer Price$464.32 - $542.08
2007 GMC Sierra 1500 ClassicV8-4.8LService typeFront Crankshaft Seal ReplacementEstimate$434.40Shop/Dealer Price$463.33 - $540.50
2007 GMC Sierra 1500 ClassicV8-6.0LService typeFront Crankshaft Seal ReplacementEstimate$434.40Shop/Dealer Price$463.32 - $540.49
2007 GMC Sierra 1500 ClassicV8-5.3LService typeFront Crankshaft Seal ReplacementEstimate$434.40Shop/Dealer Price$466.71 - $546.43
Show example GMC Sierra 1500 Classic Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

William

27 years of experience
65 reviews
William
27 years of experience
GMC Sierra 1500 Classic V8-4.8L - Oil/Fluid Leak - Pflugerville, Texas
He was very professional also explaining everything were I understood him what needs to be done

William

21 years of experience
129 reviews
William
21 years of experience
GMC Sierra 1500 Classic V8-5.3L - Oil Pressure Sensor - Estero, Florida
Very good work. I will use William again.

Philippe

8 years of experience
4 reviews
Philippe
8 years of experience
GMC Sierra 1500 Classic V8-5.3L - Car is not starting - Cherry Hill, New Jersey
Very helpful and knowledgeable

David

26 years of experience
180 reviews
David
26 years of experience
GMC Sierra 1500 Classic V8-4.8L - Heater Blower Motor Resistor - Ocala, Florida
David was amazing. The part was difficult to find but he made numerous phone calls and drove to at least two different part stores to locate it, then he finished the work and did a very good job. I highly recommend him. Very friendly and knows his stuff.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of GMC Sierra 1500 Classic services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

The Guide to Legal Car Modifications in New York
ARENA Creative / Shutterstock.com If you live in New York or are moving to the area, if you have a modified vehicle you need to know what is permissible on the roadways throughout the state. The following...
How to Remove a Car Battery
An auto battery helps power car electrical systems. To remove a car battery, you will need work gloves, safety goggles, and basic hand tools.
How Can I Prepare For an Emissions Test?
Annual Annual emissions testing is required in order to ensure that your car is not producing too much pollution and that your emissions control components are in working order. While not all areas of the US require emissions testing yet,...

Cel code p0129

Well you replaced all the parts associated with your code. You need a voltage meter to measure the voltage at the sensor. There should be a 5 volt signal and a ground on the outer wires on the sensor. If...

Heater not working

This may be related to a faulty blower motor or blower motor relay. The blower motor is a unit inside your vent system that blows warm air from the heater core to the vents when the heater is on or...

I can't shift into any gear

It sounds like you may have a throwout bearing that is hanging up. When the car is not running, nothing within the transmission is spinning, thus it is possible to put the car in gear. With the engine running, there...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com