GMC Sierra 1500 Classic Camshaft Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Camshaft Position Sensor Replacement Service

How much does a Camshaft Position Sensor Replacement cost?

On average, the cost for a GMC Sierra 1500 Classic Camshaft Position Sensor Replacement is $198 with $58 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 ClassicV8-4.8LService typeCamshaft Position Sensor ReplacementEstimate$380.68Shop/Dealer Price$440.70 - $612.66
2007 GMC Sierra 1500 ClassicV8-5.3LService typeCamshaft Position Sensor ReplacementEstimate$289.75Shop/Dealer Price$327.52 - $436.72
2007 GMC Sierra 1500 ClassicV6-4.3LService typeCamshaft Position Sensor ReplacementEstimate$261.45Shop/Dealer Price$292.17 - $380.16
2007 GMC Sierra 1500 ClassicV8-6.0LService typeCamshaft Position Sensor ReplacementEstimate$371.67Shop/Dealer Price$429.95 - $600.60
2007 GMC Sierra 1500 ClassicV8-5.3L HybridService typeCamshaft Position Sensor ReplacementEstimate$371.67Shop/Dealer Price$431.42 - $603.18
Show example GMC Sierra 1500 Classic Camshaft Position Sensor Replacement prices

What is the Camshaft Position Sensor all about?

The camshaft position sensor monitors the position of the camshaft and reports that data to the car’s onboard computer system. This computer system works with sensors and other devices to keep the engine running. With data from the camshaft position sensor (CPS), the fuel injectors know when to fire.

When the sensor malfunctions, the computer does not know when to fire the injectors and may not fire them at all. The faulty readouts may also throw off spark timing, which will affect the car’s fuel economy. This sensor is used in conjunction with the crankshaft position sensor to control ignition timing. It is common for heat and oil leaks to cause this sensor to fail, due to where the sensor is located.

Keep in mind:

  • Damage to the camshaft position sensor is often caused by oil leaks; if this is the case, you may need another part of your car replaced or repaired.
  • When the camshaft position sensor is replaced, the alignment of the timing belt should be monitored so that no fluids leak onto the position sensor mounting area.
  • Some camshaft position sensors will need to have their software updated when they are installed.
  • Timing belts, mass air flow sensors, and crankshaft position sensors can all trigger the trouble code for the camshaft position sensor.

How it's done:

  • Scan test computer for trouble codes.
  • Pinpoint tests as per flow charts.
  • Remove and replace Crankshaft Position Sensor.
  • Clear trouble codes.
  • Check for proper operation and test drive car.

Our recommendation:

The camshaft position sensor isn’t checked in most regular services, but your vehicle has warning signs for when the sensor begins to fail. Because it sends information to the camshaft, when the sensor begins to fail your engine will begin to have trouble. Your engine may have a hard time turning on, staying on, idling, or running smoothly. Your Check Engine warning light should illuminate as well.

What common symptoms indicate you may need to replace the Camshaft Position Sensor?

  • Car stalls or does not start.
  • Car struggles to accelerate (does not maintain speed).
  • Check Engine light is on.
  • Car misfires.
  • Car stumbles or sputters on startup.
  • Car runs poorly or runs rough.

How important is this service?

The camshaft position sensor provides valuable information about the camshaft position to the computer management system. The computer system uses the information from the position sensor to determine when to inject more fuel. Without the sensor’s information, the computer won’t inject fuel properly, and your vehicle will stall or sputter.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Peter

29 years of experience
592 reviews
Peter
29 years of experience
GMC Sierra 1500 Classic V6-4.3L - Oil Change - Newhall, California
Awesome job and experience!!! Peter was very professional and knowledgeable.

Philippe

8 years of experience
4 reviews
Philippe
8 years of experience
GMC Sierra 1500 Classic V8-5.3L - Car is not starting - Cherry Hill, New Jersey
Very helpful and knowledgeable

David

26 years of experience
180 reviews
David
26 years of experience
GMC Sierra 1500 Classic V8-4.8L - Heater Blower Motor Resistor - Ocala, Florida
David was amazing. The part was difficult to find but he made numerous phone calls and drove to at least two different part stores to locate it, then he finished the work and did a very good job. I highly recommend him. Very friendly and knows his stuff.

William

21 years of experience
129 reviews
William
21 years of experience
GMC Sierra 1500 Classic V8-5.3L - Oil Pressure Sensor - Estero, Florida
Very good work. I will use William again.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of GMC Sierra 1500 Classic services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Can Sensors Be Cleaned or Do They Need to Be Replaced?
In In most cases, sensors for your automobile will need to be replaced if they fail, but depending on the type of sensor and its location or function, some can be cleaned and reused (https://www.yourmechanic.com/question/can-sensors-be-cleaned-or-do-they-need-to-be-replaced). Sensors can come in many...
How Long Does a Crankshaft Position Sensor Last?
The The crankshaft position sensor monitors the rotational speed and position of the crankshaft in the engine. It reports this information to the engine management system to control the ignition system timing. The crankshaft position sensor is used with the...
How Long Does an EVP Position Sensor Last?
An An integral part of your vehicle's EGR (exhaust gas recirculation) system is the EVP position sensor. This sensor has the important job of figuring out where the gate is positioned in order to allow gases to pass through to...

Check Engine code 0024

There are quite a few things that can cause this. Your car has variable valve timing; a complex system in which to change the cam timing. It uses oil pressure to advance or retard the timing. The oil pressure is...

My 2004 Nissan X-Trail is intermittently stalling at traffic lights and stop signs.

Hi there. Having the exhaust manifold repaired should not have contributed to the engine stalling. Assuming, the Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is not coming on, leads me to believe the ECM (engine control module)/computer is not recognizing the fault. As...

Check engine light comes after a long trip. OBD II scanner gives the code P0015. What would be the cause?

Hi there. The code P0015 (https://www.yourmechanic.com/article/p0015-obd-ii-trouble-code-camshaft-position-b-timing-over-retarded-bank-1-by-jay-safford) is stored for the camshaft position sensor has recorded that the timing is excessive retard. The sensor could have failed due to oil deposits leaking onto the sensor, the variable valve timing sensor has...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com