GMC S15 Crankshaft Harmonic Balancer Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Crankshaft Harmonic Balancer Replacement Service

How much does a Crankshaft Harmonic Balancer Replacement cost?

On average, the cost for a GMC S15 Crankshaft Harmonic Balancer Replacement is $204 with $64 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 GMC S15V6-2.8LService typeCrankshaft Harmonic Balancer ReplacementEstimate$393.00Shop/Dealer Price$456.10 - $637.30
1990 GMC S15V6-4.3LService typeCrankshaft Harmonic Balancer ReplacementEstimate$318.71Shop/Dealer Price$363.72 - $494.64
1990 GMC S15L4-2.5LService typeCrankshaft Harmonic Balancer ReplacementEstimate$678.73Shop/Dealer Price$813.77 - $1214.72
Show example GMC S15 Crankshaft Harmonic Balancer Replacement prices

What is the Crankshaft Harmonic Balancer all about?

The harmonic balancer (also called “crank pulley damper”), connected to the crankshaft of an engine, reduces engine vibration and serves as a pulley for the drive belts. The balancer or “damper” is composed of two elements: a mass and an energy-dissipating element. The mass resists the acceleration of the vibration and the energy dissipating (rubber) element absorbs the vibrations. When the balancer fails, it is usually due to heat, salt, and or ozone deterioration of the rubber. General wear, tear, and stress on the rubber is also a factor.

Keep in mind:

Usually a problem with the harmonic balancer means that it needs to be replaced. However, sometimes the rubber insert that sits between the center and the outside of the pulley is all that is damaged. It is also possible for the bolt that holds the balancer in place to become loose, which can cause problems even if the pulley isn’t damaged.

How it's done:

  • Inspect the harmonic balancer.
  • Remove drive belts and balancer.
  • Inspect condition of crankshaft front seal.
  • Replace the harmonic balancer.
  • Reinstall drive belts.
  • Start car and check for proper operation.

Our recommendation:

Harmonic balancers aren’t a part of most standard inspections, so keep your eye out for warning signs. If you notice excess vibration or noise from the engine, then your balancer may be damaged, and you need to schedule an inspection.

What common symptoms indicate you may need to replace the Crankshaft Harmonic Balancer?

  • Vibration from engine.
  • Loud, abnormal engine noise, which increases with acceleration.

How important is this service?

The crankshaft harmonic balancer is connected to the crankshaft, and absorbs many of the vibrations that the engine creates. The engine creates a large amount of force that is delivered to the crankshaft, which transfers the power to the transmission. The harmonic balancer is responsible for absorbing some of the engine-created force so that the crankshaft doesn’t receive it all. When the harmonic balancer fails, the crankshaft receives all of the engine’s vibrations, and is susceptible to serious damage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Johnathon

10 years of experience
171 reviews
Johnathon
10 years of experience
GMC S15 V6-2.8L - Air Shocks Replacement (Rear) - Clovis, California
Very good and efficient.

Johnathon

10 years of experience
171 reviews
Johnathon
10 years of experience
GMC S15 V6-4.3L - Tune-up - Fresno, California
Explained everything easily. Didn't seem to be in a rush, and got my vehicle in order. Thank you, Thank you, Thank you!

Timothy

23 years of experience
107 reviews
Timothy
23 years of experience
GMC S15 V6-2.8L - Valve Cover Gasket - Tacoma, Washington
He's great!

Colby

15 years of experience
66 reviews
Colby
15 years of experience
GMC S15 V6-2.8L - Car is overheating - Denver, Colorado
Colby was early and got right to work. Finished quickly and patiently explained issues and solutions.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of GMC S15 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Top 5 Winter Car Repairs
As the temperature drops, several car repairs become more common and demand attention. Check these vehicle components to make sure they’re working.
The Traveler’s Guide to Driving in Canada
Many Many people from the United States want to visit the neighbor in the north, Canada. There are many things to enjoy about Canada, and there are countless things to do (https://www.tripadvisor.com/Attractions-g153339-Activities-Canada.html). Some of the things you may want to...
How Do I Prepare My Car for Winter?
Your Your car needs special care and attention during the cold months. To keep it running smoothly, follow these steps: Change your oil and oil filter regularly: Make sure you follow the recommendations as specified in your manual. You might...

What should I do if I can’t shift out of park?

Like most other modern vehicles, yours is equipped with a safety system designed to prevent you from driving if the Brake Lights aren’t working. However, there are times that this system may malfunction. If your car won’t shift out of...

I have an intermittent misfire - 2002 Pontiac Grand Prix

Hi and thanks for contacting YourMechanic. The EGR can cause a misfire if it is stuck open when the engine is cold or running at a lower speed. The EGR replaces some of the air with burnt fuel to help...

Convertible top won't go up

Hello, thank you for writing in. Due to the fact the convertible top's motors make no noise when they are triggered, they are likely not receiving any power. The most likely reason for this is a short that is only...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com