GMC R3500 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(22)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(22)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a GMC R3500 Power Steering Pressure Hose Replacement is $207 with $67 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 GMC R3500V8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$305.36Shop/Dealer Price$346.55 - $462.02
1991 GMC R3500V8-6.2L DieselService typePower Steering Pressure Hose ReplacementEstimate$303.33Shop/Dealer Price$344.50 - $463.88
1991 GMC R3500V8-7.4LService typePower Steering Pressure Hose ReplacementEstimate$296.35Shop/Dealer Price$335.80 - $449.96
1990 GMC R3500V8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$296.35Shop/Dealer Price$335.80 - $449.96
1990 GMC R3500V8-7.4LService typePower Steering Pressure Hose ReplacementEstimate$296.35Shop/Dealer Price$337.27 - $452.54
1990 GMC R3500V8-6.2L DieselService typePower Steering Pressure Hose ReplacementEstimate$303.33Shop/Dealer Price$344.66 - $464.17
Show example GMC R3500 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(22)

Rating Summary
20
0
0
2
0
20
0
0
2
0

Tomas

18 years of experience
226 reviews
Tomas
18 years of experience
GMC R3500 V8-5.7L - Brake System Inspection - Newark, New Jersey
Pretty good. My inspection for my brakes went very quick, (a little too quick.) Not the most thorough inspection. However, Tomas came to the same conclusion that I had already suspected and the problem is now "dually" analyzed. 15 minutes, and I'm good. Tomas was quite knowledgeable and polite. He came with the proper tools and equipment to say the least and was promptly on time for the booked appointment. I would consider requesting Tomas again for similar work. Thanks again to Tomas and the team at YourMechanic for helping out.

Shawn

13 years of experience
379 reviews
Shawn
13 years of experience
GMC Acadia V6-3.6L - Power Steering Pressure Hose Replacement - Allentown, Pennsylvania
This was my first time using Shawn and Your Mechanic and it definitely won’t be my last. I plan to tell my friends about it as well!

Rusty

24 years of experience
567 reviews
Rusty
24 years of experience
GMC C1500 V6-4.3L - Power Steering Pressure Hose - Grand Prairie, Texas
I've utilized Rusty before today and have found him to be punctual and professional. thanks man!!!

James

27 years of experience
184 reviews
James
27 years of experience
GMC Savana 3500 V8-5.7L - Power Steering Pressure Hose - Antioch, Tennessee
Very nice and profesional person

Excellent Rating

(22)

Rating Summary
20
0
0
2
0
20
0
0
2
0
Number of GMC Power Steering Pressure Hose Replacement services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Cook Food Using Your Car
Every car has the potential to be a moving kitchen! You can cook food with your car by using engine heat, body panels, or purpose-built appliances.
Symptoms of a Bad or Failing Shift Selector Cable
Common signs include the indicator not matching the gear and the vehicle not turning off, starting in another gear, or not going into gear at all.
Insurance Requirements for Car Registration in Michigan
The The state of Michigan requires that all drivers carry no-fault auto insurance, or “financial responsibility,” to help cover the cost of damages and injuries related to an auto accident. The minimum financial responsibility requirements for drivers in Michigan are...

2013 Dodge Charger Thermostat P0128

You will need to have the engine scanned and compare when engine is cold the engine coolant sensor and the ambient air temperature sensor to see if they read within 5 % of each other and the engine started and...

Can p0717 trigger p0700 on 2006 Equinox?

Both the codes P0700 and P0717 are to the transmission input shaft speed sensor and most likely are related codes. You should have transmission input speed sensor replaced and codes cleared and then see if any codes or problems return....

I have a 02 Toyota Camry 2.4L auto trans that won't shift into 4 & OD

Hi Renee. Thanks for contacting us today. The Shifter Position Switch and Neutral Safety Switch are one in the same, but I don't think that's the source of this type of problem. Typically when that component fails, it causes all...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com