GMC R3500 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a GMC R3500 Front Crankshaft Seal Replacement is $213 with $17 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 GMC R3500V8-7.4LService typeFront Crankshaft Seal ReplacementEstimate$349.22Shop/Dealer Price$366.23 - $401.04
1991 GMC R3500V8-7.4LService typeFront Crankshaft Seal ReplacementEstimate$331.20Shop/Dealer Price$344.67 - $376.84
1990 GMC R3500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$247.59Shop/Dealer Price$260.99 - $295.34
1990 GMC R3500V8-6.2L DieselService typeFront Crankshaft Seal ReplacementEstimate$287.40Shop/Dealer Price$300.37 - $332.15
1991 GMC R3500V8-6.2L DieselService typeFront Crankshaft Seal ReplacementEstimate$287.40Shop/Dealer Price$302.87 - $336.53
1991 GMC R3500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$247.59Shop/Dealer Price$261.18 - $295.68
Show example GMC R3500 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Tomas

18 years of experience
226 reviews
Tomas
18 years of experience
GMC R3500 V8-5.7L - Brake System Inspection - Newark, New Jersey
Pretty good. My inspection for my brakes went very quick, (a little too quick.) Not the most thorough inspection. However, Tomas came to the same conclusion that I had already suspected and the problem is now "dually" analyzed. 15 minutes, and I'm good. Tomas was quite knowledgeable and polite. He came with the proper tools and equipment to say the least and was promptly on time for the booked appointment. I would consider requesting Tomas again for similar work. Thanks again to Tomas and the team at YourMechanic for helping out.

Charles

27 years of experience
134 reviews
Charles
27 years of experience
GMC C3500 V8-6.5L Turbo Diesel - Front Crankshaft Seal - Seattle, Washington
Very friendly and professional did a great job

Harold

33 years of experience
52 reviews
Harold
33 years of experience
GMC Terrain L4-2.4L - Front Crankshaft Seal - Jacksonville, Florida
He was the only one who actually solved the issue rather than just continuing to put a bandaid on it, good job.

Rodrigo

16 years of experience
133 reviews
Rodrigo
16 years of experience
GMC Terrain L4-2.4L - Front Crankshaft Seal Replacement - Henderson, Nevada
n/a

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC Front Crankshaft Seal Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Increase the Reliability of Your Car
The most reliable cars are well cared for. Follow a maintenance schedule, drive carefully, and fix any problems to make your car last longer.
How Long Does a Throttle Body Last?
There There are so many components involved in a vehicle running properly, but some of the main ones are rather basic in their role. The throttle body is one of those parts. This component is part of the air intake...
Symptoms of a Bad or Failing Catalytic Converter
Common signs include reduced engine performance, rattling sounds, and the Check Engine Light turning on.

Steering vibration at highway speeds between 60 and 80 mph

The problem may be that the tires are balanced to about 60 miles per hour or less. The speed you are feeling the vibration is most likely above this speed. The mechanic cannot balance the tires above the speed their...

When car runs awhile it will stall. The engine will turn on but as soon as you put it into drive it stalls.

Hi there, thanks for writing in. Any number of things can cause an engine to stall. Assuming, the Check Engine Light is not coming on, leads me to believe the ECM (Engine Control Module)/computer is not recognizing the fault. The...

Car will start and run smoothly but will die when you try to accelerate.

Hi there. There may be a misfire on a cylinder that is causing the engine to hesitate on acceleration. Check all of the spark plugs and wires and see if they have burn marks. If there is burn marks on...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com