GMC G3500 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a GMC G3500 Fuel Injector Replacement is $842 with $702 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 GMC G3500V6-4.3LService typeFuel Injector ReplacementEstimate$1760.32Shop/Dealer Price$2165.25 - $3371.94
1994 GMC G3500V8-6.5L DieselService typeFuel Injector ReplacementEstimate$1915.57Shop/Dealer Price$2273.13 - $3331.40
1995 GMC G3500V6-4.3LService typeFuel Injector ReplacementEstimate$1751.31Shop/Dealer Price$2154.50 - $3359.88
1991 GMC G3500V8-5.7LService typeFuel Injector ReplacementEstimate$1987.57Shop/Dealer Price$2449.82 - $3832.40
1993 GMC G3500V8-5.7LService typeFuel Injector ReplacementEstimate$1987.23Shop/Dealer Price$2450.87 - $3834.30
1995 GMC G3500V8-6.5L DieselService typeFuel Injector ReplacementEstimate$1915.57Shop/Dealer Price$2273.71 - $3332.41
1992 GMC G3500V8-7.4LService typeFuel Injector ReplacementEstimate$2077.63Shop/Dealer Price$2562.41 - $4012.55
1996 GMC G3500V8-7.4LService typeFuel Injector ReplacementEstimate$2770.91Shop/Dealer Price$3349.32 - $5070.77
Show example GMC G3500 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

William

35 years of experience
731 reviews
William
35 years of experience
GMC G3500 V8-5.7L - Spark Plugs - Peoria, Arizona
William was a fantastic mechanic and was very informative and courteous. He is definitively an asset to your company.

Dellano

19 years of experience
554 reviews
Dellano
19 years of experience
GMC G3500 V8-5.7L - Parking brake is stuck - Washington, District of Columbia
Figured out the problem right away that there is no problem with the brakes system.

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
GMC G3500 V8-7.4L - Car is not starting - Denver, Colorado
He did a great job.

Derrick

12 years of experience
184 reviews
Derrick
12 years of experience
GMC G3500 V8-5.7L - Car Starter Repair - Alameda, California
Derrick showed up on time and completed the job on time and is a nice man.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC G3500 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Buy a Lexus
When buying a Lexus, consider your budget and which model you want. You should also run a vehicle history report and take a test drive before buying.
Symptoms of a Bad or Failing Proportioning/Combination Valve
If your rear brakes are locking up, especially on wet surfaces, you should have a mechanic inspect the proportioning/combination valve.
Child Seat Safety Laws in Ohio
In In the state of Ohio, there are laws covering the transportation of children in motor vehicles. The laws are based in common sense and the knowledge that child seats save lives and prevent injuries. It is the responsibility of...

What is Tire Camber?

When talking about your alignment, you may hear terms like camber, caster, or toe. These are all angles that are built into your suspension (https://www.yourmechanic.com/services/brakes-steering-and-suspension-inspection) that affect the way that your vehicle drives, handles, and how the tires wear. Over...

Car intermittently won't start

Hi there. An intermittent no start condition, can be difficult to diagnose. Replacing the fuel filter (https://www.yourmechanic.com/services/fuel-filter-replacement) would not hurt anything, especially if it hasn't been replaced in the last 30,000 miles. Diagnostic procedures should be performed, at the time...

I have a 2012 equinox and it is rattling upon acceleration and kind of rough idleing when stopped

In practice, oil consumption varies quite a bit, so much so that there is no agreement on what is excessive. As a "general" rule though, if an engine uses a quart of oil or more in 1,500 miles, that's excessive....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com