GMC G3500 Engine is sputtering Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5)

Engine is sputtering Inspection Service

How much does a Engine is sputtering Inspection cost?

On average, the cost for a GMC G3500 Engine is sputtering Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1982 GMC G3500V8-5.7LService typeEngine is sputtering InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
1986 GMC G3500V6-4.3LService typeEngine is sputtering InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1988 GMC G3500V8-7.4LService typeEngine is sputtering InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1987 GMC G3500V8-5.7LService typeEngine is sputtering InspectionEstimate$104.99Shop/Dealer Price$113.39 - $119.68
1985 GMC G3500V8-6.2L DieselService typeEngine is sputtering InspectionEstimate$104.99Shop/Dealer Price$113.42 - $119.75
1982 GMC G3500L6-4.1LService typeEngine is sputtering InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1979 GMC G3500V8-6.6LService typeEngine is sputtering InspectionEstimate$124.99Shop/Dealer Price$130.87 - $135.28
1980 GMC G3500V8-5.7LService typeEngine is sputtering InspectionEstimate$124.99Shop/Dealer Price$131.24 - $135.94
Show example GMC G3500 Engine is sputtering Inspection prices

In almost all cases, a sputtering engine is trying to tell you that there is a deeper problem that requires immediate attention. An engine running out of gas will definitely sputter but if the gas gauge indicates full, the problem lies deeper inside the engine compartment.

An incomplete combustion in the engine will cause a sputter as can the ignition system. The fuel system, such as a blocked fuel injector may also cause the vehicle to sputter. While a sputtering engine may not seem like a major issue, it is a symptom of a bigger problem that will not self-correct and will eventually result in a much more expensive repair. The source of the sputter should be investigated and repaired as soon as possible.

How this system works:

A sputtering engine can have its root cause located in a number of different systems. Here are two of the more common ones, the exhaust and fuel system.

The exhaust system collects exhaust gases from the cylinder head via the exhaust manifold, which acts as a funnel diverting exhaust gases away from the cylinders. The gases are then released through the front pipe where they travel to the catalytic converter. The catalytic converter removes the harmful elements of the gases such as carbon monoxide and hydrogen monoxide, converting them into inert gases.

The gases exit the catalytic converter into the muffler, which reduces the noise levels of the engine, and finally the exhaust fumes exit the vehicle at the tail pipe.

The fuel system is responsible for storing and supplying fuel to the car to drive the engine. Fuel is mixed with air, atomized and vaporized. This happens in the engine intake system. This mixture is then compressed in the engine cylinder and then ignited which produces the energy which moves the pistons.

Common reasons for this to happen:

  • Leak in Exhaust Manifold: A leak in the exhaust manifold, which collects exhaust gases, can cause the engine to sputter or run unevenly. This condition can also cause the Check Engine light to trigger as well as present increased engine noise and poor performance from the engine. A cracked or leaking exhaust manifold can create dangerous driving condition as the escaping hot gases can melt nearby plastic components. It can also lead to exhaust fumes making their way into the car cabin.

  • Worn Seals or Gaskets: There are a number of gaskets and seals in the exhaust system and if any of them are failing it can create a rough or sputtering engine. Gaskets and seals wear down over time and will eventually have to be replaced. Failing to do this in a timely manner can damage the exhaust manifold which is a much more expensive repair.

  • Failing Catalytic Converter: If the engine is sputtering, running rough and has a smell of rotten eggs it is probably due to a failing catalytic converter. In most cases, the Check Engine light will trigger as well. When a converter starts to fail, it isn’t able to burn off the hydrocarbons in the exhaust, and is no longer breaking down the sulfur created by the engine. This leads to the strong rotten egg smell. Eventually the car will not start at all as the catalytic converter becomes totally blocked.

  • Malfunctioning Oxygen Sensors: Oxygen sensors measure how rich or lean the exhaust gases are when they leave the vehicles combustion chamber. The vehicle computer uses this information to adjust the amount of fuel entering the engine. A dirty or failing sensor puts too much or too little fuel into the engine causing it to run rough or sputter. Oxygen sensors must be replaced on a regular basis.

  • Dirty Fuel Injectors: Fuel injectors spray fuel into the cylinders. It is then mixed with air and ignited. Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.

  • Bad or Dirty Spark Plugs: Spark plugs are responsible for igniting the fuel in the combustion chamber. If they are not working correctly or are dirty they don’t ignite the fuel cleanly and the car can misfire or sputter. The plugs will need to be replaced or cleaned.

  • Dirty Mass Airflow Sensor: The mass airflow sensor measures the amount of air that is entering the fuel injection system. It sends that information to the vehicle computer, which then delivers the proper amount of fuel to the combustion chamber. A dirty mass airflow sensor will send the wrong information the computer resulting in a rough running or sputtering engine.

  • Vacuum Leak: A leak in the vacuum system can lead to a sputtering or rough running engine. As the problem progresses the vehicle can hesitate or stall when accelerating.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the engine is sputtering issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will inspect your car's exhaust system and other important components of your vehicle. This includes the exhaust manifold, exhaust seals and gaskets, oxygen sensors, airflow sensors and more. It may be necessary for the mechanic to crank up your car to diagnose your engine's sputtering.

How important is this service?

In almost all cases, a sputter engine is a symptom of a more serious issue lurking below the surface. If the problem is not diagnosed and repaired in a timely manner the vehicle will likely start to stall, become hard to start and eventually stop running altogether.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Robert

20 years of experience
1126 reviews
Robert
20 years of experience
GMC G3500 V8-7.4L - Car is not starting - Denver, Colorado
He did a great job.

Dellano

18 years of experience
520 reviews
Dellano
18 years of experience
GMC G3500 V8-5.7L - Parking brake is stuck - Washington, District of Columbia
Figured out the problem right away that there is no problem with the brakes system.

William

34 years of experience
569 reviews
William
34 years of experience
GMC G3500 V8-5.7L - Spark Plugs - Peoria, Arizona
William was a fantastic mechanic and was very informative and courteous. He is definitively an asset to your company.

Derrick

11 years of experience
176 reviews
Derrick
11 years of experience
GMC G3500 V8-5.7L - Car Starter Repair - Alameda, California
Derrick showed up on time and completed the job on time and is a nice man.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC G3500 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 BMW ActiveHybrid 7
The The only thing better than a hybrid car is one that is designed with luxury and performance in mind. The 2012 BMW ActiveHybrid 7 nails it in all of these areas, and considering that it clocks in with a...
How to Add Neon Lights to Your Car
Have Have you ever been to a car show and seen those colored lights beneath the car? These neon lights can be used to give your car a unique aura as you drive through the night. With advancement of LED...
10 Best Stores to Buy Auto Parts in Phoenix, Arizona
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Phoenix is AutoZone.

How do I resume the cruise control speed?

When you depress the brake pedal, or the clutch pedal (if you have a manual transmission), the cruise control will stop working, granting you full power of the vehicle. To resume the cruise control speed that you had previously been...

what causes transmission to not shift?

I would check to see if there are electronic shift solenoids in your transmission. Basically, the shift speed is controlled electronically through solenoid operated valves. Heat affects these if they are malfunctioning. For example, resistance increases as temperature rises. Also,...

Ok so I got the wastegate rod is moving while reving . I have no codes showing . The scanner I have is the shop scanner it’s pretty intricate. I can test the diverter valve thru it and the n75 valve . I replaced the boost pressure sensor and the n75 . When I go to test the n75 valve it says negative response . The car has jerky acceleration it feels like the boost is working on and off . But at wot it’s like there is no boost . I’m not sure what to check next . I can’t get ahold of a vagcom at this moment . But this scanner shows a lot but don’t know what I should be looking for or why the n75 is not working during the test . Any ideas

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com