GMC Envoy XUV Exhaust Gas Recirculation (EGR) Tube Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(20)

Exhaust Gas Recirculation (EGR) Tube Replacement Service

How much does a Exhaust Gas Recirculation (EGR) Tube Replacement cost?

On average, the cost for a GMC Envoy XUV Exhaust Gas Recirculation (EGR) Tube Replacement is $354 with $259 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 GMC Envoy XUVV8-5.3LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$633.33Shop/Dealer Price$772.92 - $1169.17
2005 GMC Envoy XUVL6-4.2LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$613.33Shop/Dealer Price$752.93 - $1149.20
2004 GMC Envoy XUVL6-4.2LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$613.33Shop/Dealer Price$752.93 - $1149.20
2005 GMC Envoy XUVV8-5.3LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$613.33Shop/Dealer Price$752.91 - $1149.16
Show example GMC Envoy XUV Exhaust Gas Recirculation (EGR) Tube Replacement prices

What is the Exhaust Gas Recirculation (EGR) Tube all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates a portion of the gasses coming out of the engine by putting them back into the intake manifold, where the engine can burn them again, reducing emissions.

Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will most likely not pass an emissions test.

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not clogged.
  • Remove and replace the EGR valve and gasket.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This should clean out any sludge or carbon build-up in the air intake system. Always keep up with the regular oil changes; it will help prevent sludge build-up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation (EGR) Tube?

  • Check Engine light is on.
  • Engine rattles during acceleration.
  • Engine has trouble idling.

How important is this service?

Your engine is not as efficient as it can be, which is why you have an EGR valve. The EGR valve takes a portion of the gas that your engine is excreting, and recirculates it through the intake manifold. The intake manifold then sends the gas back to the engine, where it is used again to power your vehicle. The tube is a key part of the EGR valve, and when the tube fails, the EGR valve will fail to do its job. As a result, your vehicle will not recirculate or recycle any of the excess gas from the engine, and you will get worse gas mileage and possibly fail emissions standards.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(20)

Rating Summary
20
0
0
0
0
20
0
0
0
0

Manuel

41 years of experience
132 reviews
Manuel
41 years of experience
GMC Envoy XUV V8-5.3L - Oil Change - San Antonio, Texas

Robert

20 years of experience
1098 reviews
Robert
20 years of experience
GMC Envoy XUV V8-5.3L - Water Pump - Arvada, Colorado
He was very professional and personable.. he did not leave until he was sure that the car was running like it was supposed to and that I was satisfied

Jeffrey

27 years of experience
870 reviews
Jeffrey
27 years of experience
GMC Envoy XUV L6-4.2L - Brake Pads Replacement (Rear) - York, South Carolina
job well done

Manuel

41 years of experience
132 reviews
Manuel
41 years of experience
GMC Envoy XUV V8-5.3L - Brake Pads Replacement (Rear) - San Antonio, Texas
Great job, nice guy. Showed up even though it was raining. Thanks!

Excellent Rating

(20)

Rating Summary
20
0
0
0
0
20
0
0
0
0
Number of GMC Envoy XUV services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

2012 Nissan Rogue vs. 2012 Ford Escape: Which One Should I Buy?
Sport Utility Vehicles (SUVs) use the chassis of a truck to provide superior structure, with a larger size and often poor gas mileage. While that isn’t always true, SUVs have a raised ground clearance and are generally meant to haul...
P0401 OBD-II Trouble Code: Exhaust Gas Recirculation Flow Malfunction
P0401 P0401 code definition Exhaust Gas Recirculation Flow Insufficient Detected What the P0401 code means P0401 is an OBD-II generic code that the engine control module (ECM) detected the engine exhaust gas recirculation (EGR) valve is not flowing enough recirculated...
How to Get Better Sound Out of the System in Your Car
With With factory sound systems getting better and better, it isn’t always necessary to replace the system for ultra-high quality sound. There is, however, always room for improvement, so you can rock out to your favorite tunes on your daily...

is it ok to use red coolant in my motorcycle?

Hi there. The red coolant (orange antifreeze) has a different type of corrosion inhibitor that has a much longer service life than the green ethylene glycol coolant. It is okay to change the system over, but do not mix the...

nissan xterra anti theft issue

Hi there. In some case, when a professional mechanic is not able to connect an OBD-II diagnostic scanner to the ECU, it's an indication of a blown fuse or electrical relay. In other instances, it's due to the ECU being...

Rep light is on and now wont start like not getting gas car was runing and cut off and would not re crank

You should have the computer scanned for additional codes and also check the fuel pressures to see if the no start is a computer sensor issue like crankshaft sensor or the fuel pump is not giving pressure.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com