Geo Tracker Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Geo Tracker Car Thermostat Replacement is $207 with $67 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Geo TrackerL4-1.6LService typeCar Thermostat ReplacementEstimate$322.66Shop/Dealer Price$368.18 - $496.62
1995 Geo TrackerL4-1.6LService typeCar Thermostat ReplacementEstimate$313.65Shop/Dealer Price$357.40 - $484.52
1991 Geo TrackerL4-1.6LService typeCar Thermostat ReplacementEstimate$313.65Shop/Dealer Price$357.42 - $484.56
1997 Geo TrackerL4-1.6LService typeCar Thermostat ReplacementEstimate$319.15Shop/Dealer Price$364.30 - $495.56
1990 Geo TrackerL4-1.6LService typeCar Thermostat ReplacementEstimate$313.65Shop/Dealer Price$358.90 - $487.14
1992 Geo TrackerL4-1.6LService typeCar Thermostat ReplacementEstimate$313.65Shop/Dealer Price$357.56 - $484.81
1993 Geo TrackerL4-1.6LService typeCar Thermostat ReplacementEstimate$313.65Shop/Dealer Price$357.44 - $484.59
1996 Geo TrackerL4-1.6LService typeCar Thermostat ReplacementEstimate$319.15Shop/Dealer Price$364.30 - $495.56
Show example Geo Tracker Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Geo mechanics

Real customer reviews from Geo owners like you.

Excellent Rating

(15)

Rating Summary
14
1
0
0
0
14
1
0
0
0

Keith

27 years of experience
231 reviews
Keith
27 years of experience
Geo Tracker L4-1.6L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Grapevine, Texas
Yesterday afternoon I scheduled the appointment for this morning. With this short notice, Keith just delayed 30 minutes. That is acceptable because he took 45' minutes to pick the parts and drove over the morning commutes time for 20 miles. Keith is friendly and politely, he is skillfully to fix the problem and renewed all parts. I trust and will ask his assistance in future if I have any issue on my vehicles.

Richard

14 years of experience
601 reviews
Richard
14 years of experience
Geo Tracker L4-1.6L - Clutch Cable - Las Vegas, Nevada
He was prompt, polite. He was able to fix my problem & make adjustments to my liking. He did a great job!

John

20 years of experience
86 reviews
John
20 years of experience
Geo Tracker L4-1.6L - Car is not starting Inspection - Germantown, Tennessee
Familiar with vehicle and knew his business. Very personable fellow, too.

Damian

12 years of experience
430 reviews
Damian
12 years of experience
Geo Tracker L4-1.6L - Water Pump - Kissimmee, Florida
Damian was great, broke a few of my drill bits but at least my car is fixed and running! He was very thorough and informative! Will definitely request and recommend him in the future!!

Excellent Rating

(15)

Rating Summary
14
1
0
0
0
14
1
0
0
0
Number of Geo Tracker services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Geo MECHANICS
70+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Accelerator Pad
As As you step on the accelerator pedal in your vehicle, you probably aren’t even thinking about the accelerator pad. It seems we don’t usually notice this part until it’s badly worn, ripped, or lifting. It’s important to keep this...
How to Drive a Moving Truck When Moving Cross Country
Packing and driving a rental truck cross country can be a hard task. By planning your route and driving safely you can relieve the stress of moving.
The Guide to Right-of-Way Laws in Virginia
In In Virginia, right-of-way laws are in place to let you know when you should stop and give way to other motorists or pedestrians. Much of the time, it is simple common sense, but the rules still have to be...

Backlighting to the dashboard failed now it’s distracting

This actually may be a normal condition. The alternator on your car has a specified amount of amperage it can output at a given engine speed. For instance, your alternator's maximum output is approximately 125 amps, but only 85 amps...

can new XM turner be used with old XM antenna

In most cases the XM antenna that came installed with the car and can be adapted to the new head XM tuner. It would depend on what XM unit was purchased. You will most likely need to take the car...

Different types of noises from front end of the car.

Hi Jarod. Typically these type of noises are caused by stabilizer bar bushings that are worn, or steering components that are worn. It's also possible that a front damper under the front bumper might be loose and dragging on the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com