Ford Mustang Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,752)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,752)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Ford Mustang Front Crankshaft Seal Replacement is $154 with $14 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Ford MustangV8-5.0LService typeFront Crankshaft Seal ReplacementEstimate$303.76Shop/Dealer Price$332.10 - $384.72
2013 Ford MustangV6-3.7LService typeFront Crankshaft Seal ReplacementEstimate$245.43Shop/Dealer Price$262.10 - $297.70
2010 Ford MustangV8-4.6LService typeFront Crankshaft Seal ReplacementEstimate$201.63Shop/Dealer Price$217.00 - $251.62
2005 Ford MustangV6-4.0LService typeFront Crankshaft Seal ReplacementEstimate$297.21Shop/Dealer Price$326.91 - $401.40
1994 Ford MustangV8-5.0LService typeFront Crankshaft Seal ReplacementEstimate$245.55Shop/Dealer Price$270.31 - $320.25
2012 Ford MustangV8-5.4L TurboService typeFront Crankshaft Seal ReplacementEstimate$350.60Shop/Dealer Price$375.25 - $426.71
2009 Ford MustangV6-4.0LService typeFront Crankshaft Seal ReplacementEstimate$297.21Shop/Dealer Price$326.97 - $401.50
2006 Ford MustangV8-4.6LService typeFront Crankshaft Seal ReplacementEstimate$201.63Shop/Dealer Price$217.00 - $251.61
Show example Ford Mustang Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(1,752)

Rating Summary
1,647
51
15
12
27
1,647
51
15
12
27

Luke

16 years of experience
19 reviews
Luke
16 years of experience
Mustang 2014 - Brake Pads - Pflugerville, TX
Professional, prompt and very knowledgeable. Will be with him with appointments in the evenings.

Nezar

22 years of experience
15 reviews
Nezar
22 years of experience
Mustang 2007 - Valve Cover Gasket - Hollywood, FL
Excellent service highly recommended

Shawn

11 years of experience
8 reviews
Shawn
11 years of experience
Mustang 2012 - Battery - Oxnard, CA
Shawn was punctual, friendly, and professional. He answered all my questions.

Shawn

11 years of experience
8 reviews
Shawn
11 years of experience
Mustang 2012 - Car is not starting - Oxnard, CA
Shawn was punctual, friendly, and professional. He answered all my questions.

Excellent Rating

(1,752)

Rating Summary
1,647
51
15
12
27
1,647
51
15
12
27
Number of Ford Mustang services completed
19272+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

How to Do a Tire Safety Inspection
Car tires are a big part of staying safe on the road. Check tire inflation, tread depth, and sidewalls to make sure they're in good shape.
The Best Used Cars to Buy If You’re an Electrician
As As an electrician, you have to haul around wiring, tools and equipment, and tons of supplies. You can’t get by with a small used car, or even a big one. What you probably need is a good used cargo...
Is it Safe to Drive With a Missing Lug Nut?
A lug nut is also called a wheel nut, and is used to hold the wheel securely onto the vehicle. Depending on...

What's Dry Gas?

Dry gas, or Drygas, is an alcohol based fuel additive. Its purpose is to remove excess water from gasoline by absorbing the water and burning it off in the combustion chamber. It also prevents water in gasoline from freezing by...

Can the original rear acceleration sensor part No: 89190-44010 be changed by 89190-60030 or 89191-50020 or any oner one?

The acceleration sensor assembly that you have (your original), that is Lexus part number 89190-44010, was used from November 2002 through July 2007. The other two you refer to are not interchangeable at all with your original. Part number 89190-60030...

what cable is connected to positive battery terminal from fuse box on 2003 toyota camry

In the Toyota parts catalog, the cable that you are referring to is simply called the "positive battery cable". If your Camry was built in Japan, the positive battery cable is Toyota OEM part no. 82122-33050. If your Camry was...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com