Ford LTD Crown Victoria Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Ford LTD Crown Victoria Fuel Injector Replacement is $1093 with $798 for parts and $294 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1987 Ford LTD Crown VictoriaV8-5.8LService typeFuel Injector ReplacementEstimate$2721.53Shop/Dealer Price$3343.80 - $5140.85
1987 Ford LTD Crown VictoriaV8-5.0LService typeFuel Injector ReplacementEstimate$1890.63Shop/Dealer Price$2320.73 - $3541.14
1990 Ford LTD Crown VictoriaV8-5.0LService typeFuel Injector ReplacementEstimate$1894.91Shop/Dealer Price$2326.07 - $3549.69
1989 Ford LTD Crown VictoriaV8-5.8LService typeFuel Injector ReplacementEstimate$2704.55Shop/Dealer Price$3338.05 - $5168.85
1988 Ford LTD Crown VictoriaV8-5.8LService typeFuel Injector ReplacementEstimate$2704.55Shop/Dealer Price$3338.17 - $5169.06
1989 Ford LTD Crown VictoriaV8-5.0LService typeFuel Injector ReplacementEstimate$1890.63Shop/Dealer Price$2320.72 - $3541.13
1991 Ford LTD Crown VictoriaV8-5.0LService typeFuel Injector ReplacementEstimate$1910.41Shop/Dealer Price$2341.15 - $3564.46
1991 Ford LTD Crown VictoriaV8-5.8LService typeFuel Injector ReplacementEstimate$2724.79Shop/Dealer Price$3360.28 - $5195.24
Show example Ford LTD Crown Victoria Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Kris

12 years of experience
40 reviews
Kris
12 years of experience
Ford LTD Crown Victoria V8-5.0L - Car is not starting - Atlanta, Georgia
Quick, honest, and professional.

Reyna

15 years of experience
39 reviews
Reyna
15 years of experience
Ford LTD Crown Victoria V8-5.0L - Pre-purchase Car Inspection - Alpharetta, Georgia
Very detailed inspection and report received. I'm in NC and was looking for this vehicle in GA so Reyna's services were crucial in my decision making process. Would use this mechanic again.

Jason

17 years of experience
429 reviews
Jason
17 years of experience
Ford LTD Crown Victoria V8-5.0L - Brake Pads Replacement (Front) - Fairfield, California
This was for a friend that didn't have time to book the appointment but it was a great job and very well done. My friend was more than pleased with the service. This really solved a big problem when the car needed expert repair. It's always nice to have Jason work on the cars for real!

Jeffrey

21 years of experience
55 reviews
Jeffrey
21 years of experience
Ford LTD Crown Victoria V8-5.0L - Car is not starting - San Jose, California

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Ford LTD Crown Victoria services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Car Jack
Whether Whether you’re changing a spare tire on the side of the road or you’re doing your own maintenance in the garage, one thing is sure – you have to get at least one wheel off the ground. That’s where...
P0361 OBD-II Trouble Code: Ignition Coil K Primary / Secondary Circuit Malfunction
Trouble code P0361 means that a malfunction in an ignition coil, often due to an open or short in the driver circuit.
P0408 OBD-II Trouble Code: Exhaust Gas Recirculation Sensor B Circuit High
Trouble code P0408 means the PCM has detected an issue with the exhaust gas recirculation (EGR) system, often due to a faulty EGR temperature sensor.

Why does my truck have gas pouring out near the tank when started up?

Good question. I will go through a few steps with you to try to save you a little money and hopefully find the problem. Get under your truck near the fuel tank. Look for the lines that are coming from...

My steering vibrates when I go over 100km/h

The most likely cause of vibration at higher speeds is going to be tire balance related. Have the tire balance checked and make sure the tires are in good shape.

2007 Hyundai Azera Limited 3.8L V6 - crank but no start

The Factory Service Manual contains the complete diagnostic decision tree, and all documentation, for the issue you are describing. There should be a pressure test port; if not, a tee fitting can be installed to check pressure. There is also...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com