Ford EcoSport Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Ford EcoSport Headlight Bulb Replacement is $167 with $27 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Ford EcoSportL4-2.0LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$208.10Shop/Dealer Price$224.98 - $267.50
2018 Ford EcoSportL3-1.0L TurboService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.20 - $255.40
2018 Ford EcoSportL3-1.0L TurboService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$214.22 - $255.44
2018 Ford EcoSportL4-2.0LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.22 - $255.44
2018 Ford EcoSportL3-1.0L TurboService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$215.70 - $258.02
2018 Ford EcoSportL4-2.0LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$214.36 - $255.69
2018 Ford EcoSportL4-2.0LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$214.24 - $255.47
2018 Ford EcoSportL3-1.0L TurboService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$214.22 - $255.44
Show example Ford EcoSport Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

RYAN

6 years of experience
103 reviews
RYAN
6 years of experience
Ford EcoSport L3-1.0L Turbo - Thermostat - San Antonio, Texas
Ryan was prompt and professional.

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
Ford EcoSport L3-1.0L Turbo - Oil Change - Bloomfield, New Jersey
Attila was fantastic! Professional and efficient!

Richard

36 years of experience
104 reviews
Richard
36 years of experience
Ford EcoSport L3-1.0L Turbo - Oil Change - Tampa, Florida
It was fantastic!! Love the quick service and conveniece of them coming to you!!! Will definitely remember Richard for any future needs with my mechanic

Derrick

12 years of experience
184 reviews
Derrick
12 years of experience
Ford EcoSport L4-2.0L - Battery - Oakland, California
It was the best experience that I have in the Bay Area. He was professional, friendly and knowledgeable in his craft, and would highly recommend him to anyone that needs their car fixed on the spot.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Ford EcoSport services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P0309 OBD-II Trouble Code: Cylinder 9 Misfire Detected
P0309 means one of the engine cylinders is not firing properly due to a faulty coil, or sensor, spark plug, wiring, fuel injector or low fuel level.
How to Open Your Car Hood
To open your car hood, find the lever inside the passenger cabin and pull it. Find the hood release latch in the grille to open it all the way.
Why Does Motor Oil Viscosity Matter?
Motor oil viscosity determines how thick or thin the oil is. Multiviscosity oils make it unnecessary to change your oil for different seasons.

Click in steering wheel while turning

Realize that steering columns are a column, but they still need to flex. They are turning and they don't go straight to the steering box at angles. So they have universal joints, and a lot of times those universal joints...

Cylinders 4 and 5 are misfiring - 2007 Mercedes-Benz S55 AMG

Hello. Most of the time if there is a misfire on those two cylinders it is not caused by the computer. Typically it is caused by either failing spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement) or an internal problem. I usually start by doing...

Mass Air flow sensor cleaning

Hello, thank you for writing in. The mass air flow sensor should not be cleaned with carburetor cleaner. Carb cleaner leaves an oily type residue that is not good for the electronics within the MAF sensor. Use the appropriately designed...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com