Ford EcoSport Car AC Compressor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Car AC Compressor Replacement Service

How much does a Car AC Compressor Replacement cost?

On average, the cost for a Ford EcoSport Car AC Compressor Replacement is $1244 with $712 for parts and $532 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Ford EcoSportL3-1.0L TurboService typeCar AC Compressor ReplacementEstimate$2012.20Shop/Dealer Price$2381.68 - $3459.34
2018 Ford EcoSportL4-2.0LService typeCar AC Compressor ReplacementEstimate$1977.96Shop/Dealer Price$2340.73 - $3413.36
Show example Ford EcoSport Car AC Compressor Replacement prices

What is the AC Compressor all about?

An AC system has many components: compressor, condenser, receiver dryer, evaporator, and hoses. The compressor, the “heart” of the car’s air conditioning system works like a pump taking refrigerant, (R-12 in older cars, R-134a in 1995 and newer cars) and pressurizing it, passing it along to the evaporator.

The AC compressor has several moving parts (including pistons and valves). These internal parts can fail, causing the AC compressor to stop working. It is common for the internal parts of the compressor to come apart and disperse metallic debris throughout the system. Consequently, it is a requirement to replace the orifice tube and the receiver dryer when replacing the compressor since some of the debris may have ended up there.

For an AC compressor to work, it needs a clutch, bearing, and an electrical connector. The clutch is driven by a drive/serpentine belt, which engages the compressor when you switch on the AC. The clutch can burn or the bearing can fail. If the bearing or clutch have failed, it is recommended that the compressor be replaced. Sometimes replacing the entire compressor with a remanufactured one can be cheaper than replacing an individual clutch or bearings.

It is also common for the seals in the AC compressor to go bad. The compressor may start leaking refrigerant and/or the AC oil. If the seals no longer hold, you will need a new compressor, as the seals cannot be replaced. A compressor may also fail if there is sludge or debris in the air conditioning system. If there is sludge or debris, the hoses, evaporator, and condenser should be flushed to get rid of the contaminants. When it is not possible to flush the parts, you may need to replace those parts.

Keep in mind:

This service comes with receiver dryer and orifice tube. It is very common for metals from the compressors to go throughout the system and get caught in different components. If the compressor is replaced without the dryer and the orifice tube, it will ruin the new compressor and it will not be covered by the warranty from parts manufacturers.

How it's done:

  • Check for pressure in the AC system.
  • Check for power and ground at the compressor.
  • If compressor is found to be faulty, remove all of the refrigerant.
  • Remove the compressor, receiver drier, orifice tube, and/or expansion valve.
  • Flush all foreign materials from the AC System.
  • Install new compressor, receiver drier, and orifice tube.
  • Evacuate and recharge the AC system.
  • Leak check for any system leaks.
  • Check for proper operation of AC system.

Our recommendation:

The most common reason for an AC compressor to fail is leaky seals and inadequate lubrication. It is good practice to turn the AC on periodically so that the seals don’t dry up and stay lubricated. If you notice a change in the temperature of the air through the AC vents (not as cold as it should be), get it inspected.

What common symptoms indicate you may need to replace the AC Compressor?

  • No cold air from the vents.
  • Clicking sound from under the engine.
  • AC not working.

How important is this service?

In addition to your comfort, air conditioning systems add value to your vehicle. You should keep your AC fully operational. In some systems, the hot and cold air are blended to achieve the desired temperature setting. In these cases, when the AC system fails, you will not only NOT get any cold air, but the entire temperature regulation is thrown off.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Derrick

12 years of experience
184 reviews
Derrick
12 years of experience
Ford EcoSport L4-2.0L - Battery - Oakland, California
It was the best experience that I have in the Bay Area. He was professional, friendly and knowledgeable in his craft, and would highly recommend him to anyone that needs their car fixed on the spot.

RYAN

6 years of experience
103 reviews
RYAN
6 years of experience
Ford EcoSport L3-1.0L Turbo - Thermostat - San Antonio, Texas
Ryan was prompt and professional.

Richard

36 years of experience
104 reviews
Richard
36 years of experience
Ford EcoSport L3-1.0L Turbo - Oil Change - Tampa, Florida
It was fantastic!! Love the quick service and conveniece of them coming to you!!! Will definitely remember Richard for any future needs with my mechanic

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
Ford EcoSport L3-1.0L Turbo - Oil Change - Bloomfield, New Jersey
Attila was fantastic! Professional and efficient!

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Ford EcoSport services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P0406 OBD-II Trouble Code: Exhaust Gas Recirculation Sensor "A" Circuit High
P0406 code definition P0406 is a general ODB2 trouble code indicating a fault within the exhaust gas recirculation EGR circuit. This code...
5 Essential Things to Know About Applying and Removing Car Decals
Car Car decals are gaining traction as the digital printing methods become more cost-effective. There are a few different types of graphical decals and – as with everything in life – there are right ways and wrong ways to apply...
The Guide To Colored Curb Zones in Wisconsin
Wisconsin Wisconsin parking laws: understanding the basics Drivers in Wisconsin should make it a point to learn and understand the various parking laws they have to abide by. Failure to adhere to the law when parking could mean a citation...

Key hard to turn in ignition.

There is a common problem on these cars with the immobilizer causing the car not to start. I would first have the battery tested and rule out that. If this is not the problem and you have the immobilizer light...

Beeps, squeals, and whistle sounds in brakes

You should first have the brakes fully inspected and the brake booster and master cylinder diagnosed for any leaks or defects. If no problems are found, then check to see if the vehicle has the latest calibration for the powertrain...

My corvette engine is knocking and shaking. What is wrong

Rough idle/operation could be due to a bad tank of gasoline, dirty fuel injectors, incorrect idle speed, exhaust restrictions, vacuum leaks, incorrectly installed or damaged spark plugs, a defective or clogged fuel pump or fuel filter, failing electrical components such...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com