Ford E-350 Club Wagon Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Ford E-350 Club Wagon Wheel Bearings Replacement is $113 with $18 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Ford E-350 Club WagonV8-5.4LService typeWheel Bearings - Driver Side Front ReplacementEstimate$151.13Shop/Dealer Price$170.17 - $204.77
2003 Ford E-350 Club WagonV8-5.4LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$131.13Shop/Dealer Price$150.18 - $184.80
2005 Ford E-350 Club WagonV8-6.0L Turbo DieselService typeWheel Bearings - Driver Side Front ReplacementEstimate$131.13Shop/Dealer Price$150.18 - $184.80
2005 Ford E-350 Club WagonV10-6.8LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$131.13Shop/Dealer Price$150.16 - $184.76
2004 Ford E-350 Club WagonV8-6.0L Turbo DieselService typeWheel Bearings - Driver Side Front ReplacementEstimate$131.13Shop/Dealer Price$150.20 - $184.83
2005 Ford E-350 Club WagonV8-5.4LService typeWheel Bearings - Driver Side Front ReplacementEstimate$131.13Shop/Dealer Price$150.18 - $184.80
2003 Ford E-350 Club WagonV10-6.8LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$136.13Shop/Dealer Price$155.05 - $189.56
2004 Ford E-350 Club WagonV8-5.4LService typeWheel Bearings - Driver Side Front ReplacementEstimate$136.13Shop/Dealer Price$155.42 - $190.22
Show example Ford E-350 Club Wagon Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(10)

Rating Summary
8
1
1
0
0
8
1
1
0
0

Chris

16 years of experience
324 reviews
Chris
16 years of experience
Ford E-350 Club Wagon V8-5.4L - Check Engine Light is on - San Diego, California
Chris came on time. He was unable to recharge our A/C because he proposed a set of preliminary tests for which he did not have the equipment to perform.

Isai

27 years of experience
230 reviews
Isai
27 years of experience
Ford E-350 Club Wagon V8-5.4L - AC is not working - San Antonio, Texas
Great guy. Explained everything in ways I would understand.

Julio

27 years of experience
67 reviews
Julio
27 years of experience
Ford E-350 Club Wagon V8-5.4L - Car is not starting - Kissimmee, Florida
Julio did an excellent job for us. He explained everything he was doing and was very knowledgeable when diagnosing the problem.

Jordan

8 years of experience
84 reviews
Jordan
8 years of experience
Ford E-350 Club Wagon V8-5.4L - Alternator - Kissimmee, Florida
This was amazing! This guy was on time and friendly and it was so fast! Everything was too easy!

Excellent Rating

(10)

Rating Summary
8
1
1
0
0
8
1
1
0
0
Number of Ford E-350 Club Wagon services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

P001F OBD-II Trouble Code: “A” Camshaft Profile Control Circuit High
P001F P001F code definition The P001F code indicates a problem with the timing in your engine. What the P001F code means This PCM code means that the signals that are moving between the crankshaft and the camshaft are not in...
P0659 OBD-II Trouble Code: Actuator Supply Voltage "A" Circuit High
P0659 means there is an issue or malfunction with the actuator supply voltage "A", which may be caused by faulty wiring or control module issues.
How to Replace a Differential Gasket
Differential gaskets seals the differential housing and protects the rear-end gears and axles from exposure to the elements.

How do I recline the front seats?

Reclining the front seats is very easy. First, locate the recline lever, which is on the side of the seat, near the back. Next, lift the lever, and move the back of the seat into whatever position you desire. Finally,...

One of my fuel injector burned out what's wrong?

If you are referring to the electrical solenoid within the injector, like any electrical part it can fail due to degradation of the insulation, wire breaks and so forth. The injector can be tested while still on the car and...

My car will only shift into reverse and neutral, can't get it into the drive gear

This may be a result of low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or potentially a faulty transmission control module. A faulty transmission control module may cause a delay in acceleration or erratic shifting of gears. The transmission control module has various sensors...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com