Ford Cortina Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19,098)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19,098)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a Ford Cortina Brake Vacuum Pump Replacement is $389 with $294 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1967 Ford CortinaL4-1.6LService typeBrake Vacuum Pump ReplacementEstimate$702.95Shop/Dealer Price$859.94 - $1308.41
1966 Ford CortinaL4-1.6LService typeBrake Vacuum Pump ReplacementEstimate$682.95Shop/Dealer Price$839.96 - $1288.44
1969 Ford CortinaL4-1.6LService typeBrake Vacuum Pump ReplacementEstimate$682.95Shop/Dealer Price$839.96 - $1288.44
1970 Ford CortinaL4-1.6LService typeBrake Vacuum Pump ReplacementEstimate$682.95Shop/Dealer Price$839.94 - $1288.40
1967 Ford CortinaL4-1.5LService typeBrake Vacuum Pump ReplacementEstimate$682.95Shop/Dealer Price$839.97 - $1288.47
1964 Ford CortinaL4-1.2LService typeBrake Vacuum Pump ReplacementEstimate$682.95Shop/Dealer Price$839.96 - $1288.44
1964 Ford CortinaL4-1.5LService typeBrake Vacuum Pump ReplacementEstimate$687.95Shop/Dealer Price$844.82 - $1293.20
1968 Ford CortinaL4-1.6LService typeBrake Vacuum Pump ReplacementEstimate$687.95Shop/Dealer Price$845.19 - $1293.86
Show example Ford Cortina Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(19,098)

Rating Summary
17,917
636
124
102
319
17,917
636
124
102
319

Scott

34 years of experience
548 reviews
Scott
34 years of experience
Ford Taurus V6-3.0L - Brake Vacuum Pump - Denver, Colorado
Excellent as always

Scott

34 years of experience
548 reviews
Scott
34 years of experience
Ford Escape L4-1.6L Turbo - Canister Purge Solenoid - Denver, Colorado
Scott was great. He was on time and the work was done quickly and accurately. I will use Scott again for any repairs I may need in the future.

Genaro

13 years of experience
287 reviews
Genaro
13 years of experience
Ford E-350 Econoline V8-7.5L - Grinding noise when braking - Houston, Texas
Excellent mechanic! Professional, on time, and truthfull with his diagnosis. I 1st had Genaro look at a no start issue, and specifically requested him for some brake issues Whenever i use Your Mechanic, i will always request Genaro. Allaround a good guy!!!

Chris

22 years of experience
2229 reviews
Chris
22 years of experience
Ford Focus L4-2.3L - Cruise control is not working - Irvine, California
Showed up early. Great personality. Really helpful and honest. Great job.

Excellent Rating

(19,098)

Rating Summary
17,917
636
124
102
319
17,917
636
124
102
319
Number of Ford services completed
210078+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

What is Transmission Fluid and What Does it Do?
Transmission fluid is used to lubricate the components of a car’s transmission for optimum performance. In vehicles with automatic transmissions,...
A Buyer’s Guide to the 2012 Audi A3 TDI
Consumers Consumers steered clear of hatchbacks for a while but Audi has brought a stylish, functional, high-end option into the arena and buyers have responded. The A3 TDI offers all the versatility and performance you expect from Audi in a...
Windshield Laws in Oregon
Motorists Motorists in Oregon are required to follow numerous rules of the road, but there are also additional traffic laws of which they need to be aware. In Oregon, driving a vehicle that does not have the proper equipment, or...

Car will not start because of electric problem

The theft deterrent system on your vehicle has a module that needs to see a key that belongs to the vehicle to turn on the ignition so your vehicle can start. While looking at the theft light on the dash...

can overfilling the oil in a car cause oil on the spark plugs?

The most common reason that you have oil on the spark plugs after you remove the coils is the valve gasket is leaking oil into spark plug wells. (https://www.yourmechanic.com/services/oil-is-leaking-into-spark-plug-well-inspection) You will need to clean out the oil before replacing the...

I drive a 2006 Suzuki forenza manual, whenever I break my RPM goes up and I get a screeching noise slowing down.

Hello, thank you for writing in. There have been many similar complaints about this model and others. The issue may be caused by several different components, and you will want to check into each of them. To begin, you will...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com