Fiat 500X Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(24)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(24)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Fiat 500X Control Arm Assembly Replacement is $505 with $337 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Fiat 500XL4-1.4L TurboService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$859.20Shop/Dealer Price$1031.82 - $1539.96
2018 Fiat 500XL4-2.4LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1008.98Shop/Dealer Price$1181.49 - $1689.56
2018 Fiat 500XL4-1.4L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1008.98Shop/Dealer Price$1181.55 - $1689.66
2018 Fiat 500XL4-2.4LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$848.39Shop/Dealer Price$1018.92 - $1525.49
2018 Fiat 500XL4-1.4L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$848.39Shop/Dealer Price$1020.69 - $1528.58
2018 Fiat 500XL4-1.4L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$848.39Shop/Dealer Price$1019.09 - $1525.78
2018 Fiat 500XL4-2.4LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$848.39Shop/Dealer Price$1018.94 - $1525.52
2018 Fiat 500XL4-1.4L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$848.39Shop/Dealer Price$1018.92 - $1525.49
Show example Fiat 500X Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Fiat mechanics

Real customer reviews from Fiat owners like you.

Excellent Rating

(24)

Rating Summary
22
2
0
0
0
22
2
0
0
0

Peter

29 years of experience
592 reviews
Peter
29 years of experience
Fiat 500X L4-1.4L Turbo - Oil Change - Los Angeles, California
Great service! Thanks!

Christian

11 years of experience
36 reviews
Christian
11 years of experience
Fiat 500X L4-2.4L - Check Engine Light is on - Fort Lauderdale, Florida
Excellent Service, listened to my concerns, was very patient with me answering all sorts of questions while he worked. Highly recommend.

Simon

28 years of experience
378 reviews
Simon
28 years of experience
Fiat 500X L4-2.4L - Car Thermostat Replacement - Temple Hills, Maryland
Thank you Simon for your professionalism in serving my Fiat

Rodney

37 years of experience
611 reviews
Rodney
37 years of experience
Fiat 500X L4-2.4L - Spark Plugs - Sacramento, California
Great service!

Excellent Rating

(24)

Rating Summary
22
2
0
0
0
22
2
0
0
0
Number of Fiat 500X services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Fiat MECHANICS
300+
experts on our platform

Recent articles & questions

How to Replace an Instrument Voltage Regulator
The instrument cluster has a voltage regulator that fails when the panel is dim or flickering, reads erratically, or is totally inoperable.
How to Reduce the Damage to a Flooded Car
Flood damage can greatly impact the function and value of your car. However, there are methods to preserve your car and minimize the amount of damage.
The Traveler’s Guide to Driving in Denmark
Denmark Denmark is a country full of history and interesting places (http://www.visitdenmark.com/guide/denmarks-most-visited-attractions) to visit. It’s very popular with travelers for the beauty of the country and the friendliness of the people. You might want to visit Tivoli Gardens in Copenhagen....

Problem with transmission linkage

The linkage for the gear selector is located inside the steering column. Over time, continuous usage of any mechanical part will cause wear and tear, and eventually failed components. An inspection of your transmission (https://www.yourmechanic.com/services/not-able-to-change-gears-inspection) should be carried out by...

Clear liquid is leaking from the right side of the car, where could this be coming from?

It sounds like you may have an axle seal (https://www.yourmechanic.com/services/axle-shaft-seal-replacement) leaking. This may or may not have been caused by the axle replacement, or the seal could simply be hard and brittle. Any seal can become hard and brittle over...

I need a alternator my Vin is 1GCGK23U44F245647 could you tell me if I need a 105 or 145 amp

Assuming the alternator is original, and thus has never been replaced or substituted with a part that is non-original, you can quickly tell which one you have by reading the tag on the alternator. You will see a tag that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com