Dodge Monaco Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(43)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(43)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Dodge Monaco Power Steering Pressure Hose Replacement is $249 with $109 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Dodge MonacoV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$372.26Shop/Dealer Price$430.18 - $595.82
1992 Dodge MonacoV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$363.25Shop/Dealer Price$419.40 - $583.72
1991 Dodge MonacoV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$363.25Shop/Dealer Price$419.42 - $583.76
Show example Dodge Monaco Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(43)

Rating Summary
42
1
0
0
0
42
1
0
0
0

Chris

21 years of experience
448 reviews
Chris
21 years of experience
Dodge Monaco V8-5.2L - Car is not starting - Hillsboro, Oregon
Came well on time, was very transparent with how the appointment would go, and managed to figure out things I wasn't much help on (like where the hood release is). He made sure I had the information I needed before he left, and went above and beyond with making sure we'd have the right part to replace since I have a 1977 vehicle. I highly recommend Chris.

Omar

22 years of experience
67 reviews
Omar
22 years of experience
Dodge Ram 1500 V6-3.9L - Power Steering Pressure Hose - Scottsdale, Arizona

Mathew

7 years of experience
118 reviews
Mathew
7 years of experience
Dodge Durango V8-4.7L - Power Steering Pressure Hose Replacement - Philadelphia, Pennsylvania
Matthew was timely, courteous and was able to take care of my issues

William

21 years of experience
129 reviews
William
21 years of experience
Dodge Grand Caravan V6-3.3L - Power Steering Pressure Hose - Fort Myers, Florida
Very knowledgeable and kind!!!He even test drove it to make sure everything was working properly and advised us of what we may need to fix in the future

Excellent Rating

(43)

Rating Summary
42
1
0
0
0
42
1
0
0
0
Number of Dodge Power Steering Pressure Hose Replacement services completed
473+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Remove a Name From a Car Title
A A car’s certificate of title (https://www.yourmechanic.com/article/how-to-get-a-car-replacement-title) is proof of who has legal ownership of the vehicle. Every vehicle on the road has a title. If there is a change in ownership for any reason, you will have to change...
How to Finance a Used Car
You’ve You’ve saved some money to purchase a used car. And while you could use those funds to pay cash for a vehicle from an individual, you can also benefit from having money in hand when visiting a dealership. The...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Iowa
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Iowa through auto mechanic schools, jobs or some garages.

How do I repair srs code b0108?

Hi there. When you get this code it is typically due to a failure of the passenger side air bag. Th air bag fails internally causing this light to come on. It can also be a circuit failure so I...

Hi - I have the 2014 wildtrak. The powertrain light came on Friday after about 30 minutes of driving no more than 65km. It came of

The powertrain warning light is intended to alert you to a malfunction in engine controls, the transmission or traction control/ABS. If the problem resolves itself the warning light may turn off. For example, if you have a heavy load, perhaps...

2005 Toyota Sienna

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com