Dodge Challenger Throttle/Accelerator Pedal Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(313)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(313)

Throttle/Accelerator Pedal Position Sensor Replacement Service

How much does a Throttle/Accelerator Pedal Position Sensor Replacement cost?

On average, the cost for a Dodge Challenger Throttle/Accelerator Pedal Position Sensor Replacement is $229 with $134 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Dodge ChallengerV6-3.5LService typeThrottle/Accelerator Pedal Position Sensor ReplacementEstimate$382.79Shop/Dealer Price$459.74 - $668.09
Show example Dodge Challenger Throttle/Accelerator Pedal Position Sensor Replacement prices

What is the Throttle/Accelerator Pedal Position Sensor all about?

On older vehicle designs, a simple throttle cable connects the accelerator pedal to the engine and controls the amount of fuel delivered to the engine. However, with fuel injected systems, that has changed. Newer engines now use electronics to control the amount of fuel sent to the engine based on accelerator pedal movement. This is the job of the accelerator pedal position sensor. It’s mounted to the gas pedal, and essentially translates the movement of the pedal (speed and position) into voltage, which tells the car’s computer how much fuel to supply for engine acceleration.

Keep in mind:

  • It’s impossible to check the operation of the accelerator pedal position sensor visually as it requires a voltmeter and an understanding of the proper voltage output range.
  • It’s possible for an accelerator pedal position sensor to operate intermittently.
  • A discrepancy in voltage will put the computer into “limp” mode, which provides significantly reduced power to prevent damage.

How it's done:

  • The throttle pedal position sensor is verified that it needs to be replaced. The throttle trim cover is then removed to access the sensor .
  • The defective throttle pedal position sensor is disconnected and removed.

  • The new throttle pedal position sensor is installed onto the firewall and reconnected.

  • The engine is started and the throttle pedal position sensor is tested for operation. The trim panel is then reinstalled.

  • The vehicle is road tested to ensure proper operation of the throttle pedal position sensor.

Our recommendation:

There is no set service or replacement period for your accelerator pedal position sensor. If you suspect a problem with your accelerator pedal position sensor, have one of our expert mechanics diagnose the system.

What common symptoms indicate you may need to replace the Throttle/Accelerator Pedal Position Sensor?

  • Lagging or intermittent acceleration
  • No acceleration
  • Limited power (limp mode)
  • No throttle response in Park or Neutral

How important is this service?

Because the accelerator pedal position sensor tells the car’s computer how quickly you’re depressing the accelerator pedal and controls the supply of fuel to the engine, replacement is very important. While your car will continue to operate even if there is a problem with the sensor, it will do so with limited capacity. Our experienced mechanics will use a voltmeter to determine sensor operation and diagnose the problem accurately. Have a faulty accelerator pedal position sensor replaced immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(313)

Rating Summary
303
5
1
0
4
303
5
1
0
4

Nicholas

11 years of experience
303 reviews
Nicholas
11 years of experience
Dodge Challenger V8-5.7L - Camshaft Position Sensor Replacement - Houston, Texas
Showed up early, worked quickly, explained everything very clearly. Was very helpful and friendly. Hopefully I can choose him for any future appointments.

Richard

16 years of experience
16 reviews
Richard
16 years of experience
Dodge Challenger V6-3.6L - Brake System Flush - San Diego, California
Excellent mechanic, very friendly.

Bryan

2 years of experience
92 reviews
Bryan
2 years of experience
Dodge Challenger V8-6.1L - Battery - Fort Lauderdale, Florida
Bryan was very efficient.

Marco

29 years of experience
222 reviews
Marco
29 years of experience
Dodge Challenger V8-5.7L - Check Engine Light is on Inspection - Perris, California
Smooth, seamless very helpful.

Excellent Rating

(313)

Rating Summary
303
5
1
0
4
303
5
1
0
4
Number of Dodge Challenger services completed
3443+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

4 Essential Things to Know About Your Car’s Check Engine Light
The Check Engine Light turns on when there's an engine problem. A bad oxygen sensor or failed spark plug are common causes for the Check Engine Light.
Symptoms of a Bad or Failing Transmission Speed Sensor
Common signs include harsh or improper shifting, cruise control not working, and the Check Engine Light coming on.
How Long Does a Refrigerant Pressure Sensor (Switch) Last?
Your Your car’s air conditioning system helps keep you and your passengers cool and comfortable during hot weather. It also plays a role in operating the front defroster. In order to operate properly, the system needs a refrigerant – just...

Hi - Knocking noise

Hello. If there is a knocking noise then it may have some bad fuel or it may be another failure like an internal engine problem or a bad sensor. I usually start the diagnostic process by scanning the computer for...

My vehicle stalls while driving at 50-60 mph after running 10-15 minutes. Restarts immediately on start up.

Hi there. Check the ignition coils and see if they are getting hot. Also, check the spark plugs and wires and see when the last time they were replaced. Old spark plugs will rust up causing a resistance and a...

where is the location of crank position sensor in 2001 s600

Hello, thank you for writing in. The crankshaft position sensor is located on the back of the engine towards the top of the transmission bell housing. It will be towards the driver's side, and be tucked in close to the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com