Dodge Caravan Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(255)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(255)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Dodge Caravan Fuel Injector Replacement is $150 with $10 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Dodge CaravanV6-3.3LService typeFuel Injector ReplacementEstimate$1300.18Shop/Dealer Price$1561.96 - $2332.70
1995 Dodge CaravanV6-3.3LService typeFuel Injector ReplacementEstimate$780.11Shop/Dealer Price$933.54 - $1388.88
2000 Dodge CaravanL4-2.4LService typeFuel Injector ReplacementEstimate$1079.79Shop/Dealer Price$1315.10 - $2016.84
1990 Dodge CaravanL4-2.5LService typeFuel Injector ReplacementEstimate$1048.67Shop/Dealer Price$1276.20 - $1954.60
1999 Dodge CaravanL4-2.4LService typeFuel Injector ReplacementEstimate$1079.79Shop/Dealer Price$1316.57 - $2019.42
1994 Dodge CaravanV6-3.0LService typeFuel Injector ReplacementEstimate$2000.94Shop/Dealer Price$2442.53 - $3759.65
2001 Dodge CaravanL4-2.4LService typeFuel Injector ReplacementEstimate$879.47Shop/Dealer Price$1064.71 - $1616.23
1997 Dodge CaravanV6-3.0LService typeFuel Injector ReplacementEstimate$2000.94Shop/Dealer Price$2442.29 - $3759.23
Show example Dodge Caravan Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(255)

Rating Summary
233
12
0
1
9
233
12
0
1
9

Shawn

11 years of experience
8 reviews
Shawn
11 years of experience
Caravan 2001 - Starter - Ventura, CA
Professional, approachable & knowledgeable.

Dan

32 years of experience
1001 reviews
Dan
32 years of experience
Caravan 2006 - Starter - Lawrenceville, GA
Great work!

Mazyar

5 years of experience
372 reviews
Mazyar
5 years of experience
Caravan 2002 - Loud squealing or squeaking is coming from timing belt - Atlanta, GA
Thank you

Jason

0 years of experience
417 reviews
Jason
0 years of experience
Caravan 1999 - Oil Pressure Sensor - Union City, CA
Reliable, Honest and Highly efficient in quality repair services. Would highly recommend!

Excellent Rating

(255)

Rating Summary
233
12
0
1
9
233
12
0
1
9
Number of Dodge Caravan services completed
2805+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing AC Air Filter
Common signs of a clogged AC air filter include reduced airflow from AC vents, less power coming from the engine, and increased dust in the cabin.
P2286 OBD-II Trouble Code: Injector Control Press Sensor Circuit High
P2286 P2286 code definition Injector Control Press Sensor Circuit High What the P2286 code means P2286 is an OBD-II generic code for the engine control module (ECM) detecting the injector control pressure (ICP) sensor circuit is registering a high signal...
P2194 OBD-II Trouble Code: System Too Rich at Higher Load Bank 2
P2194 P2194 code definition System too rich at higher load bank 2 What the P2194 code means This trouble code indicates that the bank 2 side of the engine is receiving a higher level of fuel than was specified by...

Clutch has no resistance

A clutch with low resistance or effort generally indicates a problem in the clutch hydraulic system. Not sure if this is related to the stalling issue, but it may be putting additional load on the engine when the vehicle is...

Starter and catalytic converter failure

Hello. From what you describe it seems that your vehicle has more than one issue. Oil in the intake is usually caused by a dirty or clogged positive crankcase ventilation (PCV) valve (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-positive-crankcase-ventilation-pcv-valve) or system. I would check to make...

I changed the battery and alternator but for some reason the battery isn't charging what could be the issue

Check the fuse 65 in the main engine fuse box, it is a 7.5 amp fuse. Then check the main fuse A, a 120amp fuse. If both of these fuses are good then you will have to check them for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com