Dodge B1500 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(21)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(21)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Dodge B1500 Power Steering Pressure Hose Replacement is $195 with $55 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Dodge B1500V8-5.2LService typePower Steering Pressure Hose ReplacementEstimate$382.82Shop/Dealer Price$443.38 - $616.94
1995 Dodge B1500V6-3.9LService typePower Steering Pressure Hose ReplacementEstimate$403.97Shop/Dealer Price$470.30 - $665.16
1998 Dodge B1500V8-5.2LService typePower Steering Pressure Hose ReplacementEstimate$528.71Shop/Dealer Price$626.25 - $914.68
1995 Dodge B1500V8-5.2LService typePower Steering Pressure Hose ReplacementEstimate$373.81Shop/Dealer Price$432.62 - $604.88
1997 Dodge B1500V8-5.2LService typePower Steering Pressure Hose ReplacementEstimate$373.81Shop/Dealer Price$434.10 - $607.46
1996 Dodge B1500V6-3.9LService typePower Steering Pressure Hose ReplacementEstimate$403.97Shop/Dealer Price$470.46 - $665.45
1997 Dodge B1500V6-3.9LService typePower Steering Pressure Hose ReplacementEstimate$403.97Shop/Dealer Price$470.34 - $665.23
1998 Dodge B1500V6-3.9LService typePower Steering Pressure Hose ReplacementEstimate$255.33Shop/Dealer Price$284.52 - $367.92
Show example Dodge B1500 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(21)

Rating Summary
20
0
0
0
1
20
0
0
0
1

Dellano

19 years of experience
554 reviews
Dellano
19 years of experience
Dodge B1500 V6-3.9L - Alternator - Rockville, Maryland
Very satisfied with the work. Dellanos knows what he is doing and is capable of doing it. Quite professional.

Michael

22 years of experience
391 reviews
Michael
22 years of experience
Dodge B1500 V6-3.9L - Water Pump - Pomona, California
Very informative, punctual and up front about my car needs. No pressure to buy and a pleasure to have working on my Van.

Andrew

16 years of experience
657 reviews
Andrew
16 years of experience
Dodge B1500 V6-3.9L - Water Pump - Portland, Oregon
Very competent and helpful.

Raymond

28 years of experience
280 reviews
Raymond
28 years of experience
Dodge B1500 V6-3.9L - Transmission Fluid Service - Apple Valley, California
van runs great!!!

Excellent Rating

(21)

Rating Summary
20
0
0
0
1
20
0
0
0
1
Number of Dodge B1500 services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Top 10 Scenic Drives in Texas
Much of the Texas landscape remains untouched by human influence, making it a prime place to explore the beauty Mother Nature provides. The state has a wide variety of terrain and wildlife ranging from the arid desert to lush forests,...
Common Signs of a Dirty Air Filter
A car air filter cleans the air entering the engine. Signs of a dirty air filter include a misfiring engine, unusual noises, and reduced fuel economy.
How Long Does an Accelerator Cable Last?
The The accelerator cable in your car is what allows you, as the driver, to control the speed of your vehicle by pressing down or releasing the pressure on the accelerator pedal. The cable itself is made out of metal...

How do you adjust the power side view mirrors?

Your car’s side view mirrors provide you with a view to the side and behind your car, ensuring that you’re able to change lanes without worrying about colliding with another car. However, you need to have them adjusted properly in...

Car sputters when I hit the gas hard especially in low second gear

Hi there. This can be caused by a few different things. Most of the time when it comes up all of a sudden it is due to a lack of air flow due to an intake leak, a sensor that...

Rear brakes locking up.

If the ABS light is on, there will be diagnostic codes to access. Those codes will provide enough clues to dig into this. I would first obtain those codes simply because they will give a direct indication of what components...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com