Chrysler Sebring Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(727)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(727)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Chrysler Sebring Headlight Bulb Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Chrysler SebringV6-2.7LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$185.60Shop/Dealer Price$196.85 - $222.50
2004 Chrysler SebringV6-3.0LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.07 - $210.40
2002 Chrysler SebringV6-3.0LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
2002 Chrysler SebringV6-2.7LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
1999 Chrysler SebringV6-2.5LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$187.57 - $213.02
2009 Chrysler SebringV6-2.7LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.24 - $210.69
2009 Chrysler SebringV6-3.5LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.11 - $210.47
2004 Chrysler SebringV6-3.0LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
Show example Chrysler Sebring Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(727)

Rating Summary
674
23
4
6
20
674
23
4
6
20

Brian

20 years of experience
173 reviews
Brian
20 years of experience
Sebring 2009 - Power Steering Pump - Hagerstown, MD
Everything went smoothly and on time!

Randy

20 years of experience
68 reviews
Randy
20 years of experience
Sebring 2007 - Oil/Fluid Leak - Cape Coral, FL
Randy was very nice, professional and informative.

Gustavo

15 years of experience
303 reviews
Gustavo
15 years of experience
Sebring 2009 - Engine Mount - New Braunfels, TX
Excellent job by Gustavo.

Gustavo

15 years of experience
303 reviews
Gustavo
15 years of experience
Sebring 2009 - Air Filter - New Braunfels, TX
Excellent job by Gustavo.

Excellent Rating

(727)

Rating Summary
674
23
4
6
20
674
23
4
6
20
Number of Chrysler Sebring services completed
7997+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

P0208 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 8
P0208 P0208 code definition Injector Circuit Malfunction - Cylinder 8 What the P0208 code means P0208 is set when the Engine Control Module (ECM) detects voltage or resistance that is out of range in the cylinder 8 fuel injector circuit....
How Long Does an Accelerator Cable Last?
The The accelerator cable in your car is what allows you, as the driver, to control the speed of your vehicle by pressing down or releasing the pressure on the accelerator pedal. The cable itself is made out of metal...
P0844 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch A Circuit Intermittent
P0844 means there is an issue with the voltage signal from the transmission fluid pressure sensor, possibly due to a faulty sensor or fluid issues.

Whole radio stops and shuts off at random

Hello! Thank you for writing in with this question. Many Toyota vehicles have been affected with similar issues. Oftentimes, this problem is caused by a ground issue in the faceplate of the radio. Toyota offers an updated factory radio. You...

Instrument cluster shuts down

Hi. A check of the wiring going from the instrument cluster to the BCM is needed. A lot times there is a broken wire, shorted circuit, short to ground, or a corroded wiring or connector. These are all usually the...

I have a 2005 trailblazer

Your vehicle can use up to 15% ethanol with no ill effects and such use (of E-15 for example) does NOT require regular use of any particular fuel system "cleaner". Most gasoline vended these days already contains a sufficient additive...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com