Chrysler New Yorker Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Chrysler New Yorker Brake Pad Replacement is $191 with $51 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Chrysler New YorkerV6-3.5LService typeBrake Pads - Front ReplacementEstimate$316.12Shop/Dealer Price$360.00 - $483.54
1992 Chrysler New YorkerV6-3.3LService typeBrake Pads - Front ReplacementEstimate$336.31Shop/Dealer Price$378.79 - $501.28
1993 Chrysler New YorkerV6-3.8LService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$349.25 - $471.48
1993 Chrysler New YorkerV6-3.3LService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$349.25 - $471.48
1994 Chrysler New YorkerV6-3.5LService typeBrake Pads - Rear ReplacementEstimate$447.91Shop/Dealer Price$526.72 - $755.66
1992 Chrysler New YorkerV6-3.3LService typeBrake Pads - Rear ReplacementEstimate$495.59Shop/Dealer Price$578.09 - $820.18
1991 Chrysler New YorkerV6-3.3LService typeBrake Pads - Rear ReplacementEstimate$495.59Shop/Dealer Price$577.94 - $819.92
1990 Chrysler New YorkerV6-3.3LService typeBrake Pads - Front ReplacementEstimate$367.47Shop/Dealer Price$417.77 - $563.65
Show example Chrysler New Yorker Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Shaun

11 years of experience
542 reviews
Shaun
11 years of experience
Chrysler New Yorker V6-3.3L - Radiator - Chandler, Arizona
will use Shaun again if needed. Happy to recommend him to family and friends.

Nicholas

22 years of experience
354 reviews
Nicholas
22 years of experience
Chrysler New Yorker V6-3.0L - Oil Change - Arvada, Colorado
Nicholas is a very knowledgeable Mechanic. I know very little to almost nothing about my car. But I feel like today I know more. Nicholas took his time explaining to me the in and outs of everything he looked at. He gave me recommendations for what steps to take next. He even prioritized the ones that he felt are most important.

Benji

23 years of experience
309 reviews
Benji
23 years of experience
Chrysler New Yorker V6-3.3L - Window Motor / Regulator Assembly Replacement (Passenger Side Front) - Chandler, Arizona
did the work quickly and professionally. Will want him back.

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Chrysler New Yorker V8-7.2L - Starter - Norfolk, Virginia
Fantastic service and helpful all the way through. Great guy I'd recommend to anyone who has car troubles.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Chrysler New Yorker services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Chevrolet Silverado Hybrid
If If you’re looking for a half-ton pickup truck that also gets great gas mileage, look no further than the 2012 Chevrolet Silverado Hybrid. While it has the towing and carrying capacity you’d look for in any regular truck, it...
How Long Do Engine Motor Mounts Last?
Car motor mounts secure the engine to the chassis to absorb vibrations and keep the engine in place. Motor mounts last a long time, but they can fail.
P0268 OBD-II Trouble Code: Cylinder number 3 Injector Circuit High
P0268 P0268 code definition Cylinder number 3 Injector Circuit High What the P0268 code means P0268 is an OBD-II diagnostic trouble code (https://www.yourmechanic.com/article/what-is-the-on-board-diagnostics-obd-system) that is stored when the engine control module (ECM) (https://www.yourmechanic.com/article/what-is-a-vehicle-s-electrical-control-unit) detects that the cylinder number 3 injector...

How do I change a track with the steering wheel?

You can use the buttons on your steering wheel to toggle between songs when listening to a CD or MP3 disc. Press the up arrow on the steering wheel to go to the next track, or the down arrow to...

What does the airbag Warning Light mean?

The airbag Warning Light is located on your instrument panel. This light illuminates when your airbag system is not operating properly. If the airbag Warning Light comes on, you should have your vehicle inspected as soon as possible. Tip The...

Misfires 50-90 km stalling

It sounds like your ignition cylinder (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-ignition-lock-cylinder) may have seized up. This can happen over time due to key tumblers inside the ignition cylinder wearing down and becoming unable to make the proper pattern when the key is inserted. You could...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com