Chrysler Neon Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(82)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(82)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Chrysler Neon Water Pump Replacement is $484 with $106 for parts and $378 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Chrysler NeonL4-2.0LService typeWater Pump ReplacementEstimate$630.34Shop/Dealer Price$693.02 - $859.19
2001 Chrysler NeonL4-2.0LService typeWater Pump ReplacementEstimate$649.81Shop/Dealer Price$708.27 - $871.28
2000 Chrysler NeonL4-2.0LService typeWater Pump ReplacementEstimate$649.81Shop/Dealer Price$708.35 - $871.41
Show example Chrysler Neon Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(82)

Rating Summary
75
3
0
1
3
75
3
0
1
3

Mark

12 years of experience
349 reviews
Mark
12 years of experience
Chrysler Neon L4-2.0L - Oil Change - Fremont, California

Chuck

18 years of experience
464 reviews
Chuck
18 years of experience
Chrysler 300 V8-5.7L - Water Pump - Grand Prairie, Texas
Chuck was great!

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
Chrysler 300 V6-2.7L - Water Pump - Peoria, Arizona
Peter was excellent and he was very knowledgeable. He explained the reason for certain parts breaking down/messing up so i had a better understanding.

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Chrysler PT Cruiser L4-2.4L - Water Pump - Norfolk, Virginia
Very friendly and helpful. He did a wonderful job and GREAT 珞

Excellent Rating

(82)

Rating Summary
75
3
0
1
3
75
3
0
1
3
Number of Chrysler Water Pump Replacement services completed
902+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

What Does the Dirty Air Filter Warning Light Mean?
The dirty air filter warning light turns on when their is reduced airflow to the engine, which affects your car's gas mileage and performance.
P2320 OBD-II Trouble Code: Ignition Coil G Secondary Circuit
P2320 P2320 code definition Ignition Coil G Secondary Circuit What the P2320 code means P2320 is an OBD-II generic code for the engine control module (ECM) (https://www.yourmechanic.com/article/what-is-a-vehicle-s-electrical-control-unit) detecting ignition coil G or 7 secondary circuit having low ionization. This means...
P0765 OBD-II Trouble Code: Shift Solenoid D Malfunction
P0765 code means there was an abnormality detected within solenoid D often due too internal blockages or malfunctioning transmission parts.

Car lost power while driving

If your van just started losing power all of a sudden an died, then it may have been a fuel pump that failed. It can also be caused by one of the sensors failing or a number of other issues....

2012 GMC Sierra 2500HD No Blend Door Working

Hello, you are going to need a diagnostic chart for this type of issues. The chart gives you a process to a path of repair or replacement for each code. When you have many system codes (https://www.yourmechanic.com/article/how-to-read-and-understand-check-engine-light-codes-by-jason-unrau) you would first...

Shift stick is loose 2007 Chevrolet Impala

Hello - the symptoms you describe are most likely caused by a loose or worn out shifter cable (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-shift-selector-cable). It may have even become disconnected on the transmission end of the cable. I recommend a shifter cable replacement (https://www.yourmechanic.com/services/shift-selector-cable-replacement) performed...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com