Chevrolet Traverse Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(291)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(291)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Chevrolet Traverse Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Chevrolet TraverseV6-3.6LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2015 Chevrolet TraverseV6-3.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Chevrolet TraverseV6-3.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2010 Chevrolet TraverseV6-3.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2018 Chevrolet TraverseL4-2.0L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2022 Chevrolet TraverseV6-3.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Chevrolet TraverseV6-3.6LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2011 Chevrolet TraverseV6-3.6LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Traverse Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(291)

Rating Summary
274
8
2
3
4
274
8
2
3
4

Thomas

12 years of experience
105 reviews
Thomas
12 years of experience
Chevrolet Traverse V6-3.6L - Headlight Bulb Replacement (Driver Side High Beam) - Grand Prairie, Texas
Thomas was great!

Sergio

10 years of experience
204 reviews
Sergio
10 years of experience
Chevrolet Traverse V6-3.6L - Brake Pads Replacement (Rear) - San Antonio, Texas
He was great and so much cheaper than going elsewhere! He gave us good tips on what to look out for and showed us the problem instead of just telling us. I highly recommend!

Peter

27 years of experience
86 reviews
Peter
27 years of experience
Chevrolet Traverse V6-3.6L - Oil Change - Fresno, California
Service/transaction was simple. I would use this service again

Leslie

14 years of experience
81 reviews
Leslie
14 years of experience
Chevrolet Traverse V6-3.6L - Car is not starting - Philadelphia, Pennsylvania
NA

Excellent Rating

(291)

Rating Summary
274
8
2
3
4
274
8
2
3
4
Number of Chevrolet Traverse services completed
3201+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Oil Cooler
Common signs include oil or coolant leaking from the oil cooler, oil getting in the cooling system, and coolant getting in the oil.
P3412 OBD-II Trouble Code: Cylinder 2 Deactivation/Intake Valve Control Circuit High
P3412 means the cylinder valve control circulation is reading high due to electrical problems, bad sensor or solenoid, or low oil pressure.
What Does the Frost Warning Light Mean?
The frost warning indicator alerts you when you're at risk of driving in freezing weather and ice is present, when it can be dangerous to drive.

Instrument cluster on the dash, tachometer bounces, speedometer at 0. Unplugged ABS module, speedometer at 0. doesn't shift gears

Hello. There are a lot of possible issues that can cause this. Most of the time this is either due to a short in the ABS module or it may just be a voltage issue. I would usually start by...

I have a loud clunk in my front suspension on my 2005 nissan titan. I've read that I may need a new sway bar and ball joints.

Hi there. When adding a lift kit to any vehicle its important to replace the ball joints so they are not damaged when the standard lift is removed. Plus, either the sway bar could be replaced or extensions could be...

My car is bucking at low speeds and while in drive at stop signs and red lights no codes it's an '06 expedition.

It sounds like you may have a crankshaft position sensor that may be on the verge of failing. A crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) is an electronic device used to monitor the position or rotational speed of the crankshaft. This information...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com