Chevrolet Trailblazer EXT Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(90)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(90)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Chevrolet Trailblazer EXT Power Steering Pressure Hose Replacement is $335 with $195 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Chevrolet Trailblazer EXTV8-5.3LService typePower Steering Pressure Hose ReplacementEstimate$854.96Shop/Dealer Price$963.25 - $1263.82
2004 Chevrolet Trailblazer EXTV8-5.3LService typePower Steering Pressure Hose ReplacementEstimate$827.93Shop/Dealer Price$930.92 - $1227.52
2005 Chevrolet Trailblazer EXTL6-4.2LService typePower Steering Pressure Hose ReplacementEstimate$1046.05Shop/Dealer Price$1203.65 - $1663.89
2006 Chevrolet Trailblazer EXTV8-5.3LService typePower Steering Pressure Hose ReplacementEstimate$827.93Shop/Dealer Price$930.99 - $1227.64
2006 Chevrolet Trailblazer EXTL6-4.2LService typePower Steering Pressure Hose ReplacementEstimate$1046.05Shop/Dealer Price$1208.06 - $1671.62
2003 Chevrolet Trailblazer EXTV8-5.3LService typePower Steering Pressure Hose ReplacementEstimate$827.93Shop/Dealer Price$931.42 - $1228.38
2003 Chevrolet Trailblazer EXTL6-4.2LService typePower Steering Pressure Hose ReplacementEstimate$1046.05Shop/Dealer Price$1203.69 - $1663.97
2002 Chevrolet Trailblazer EXTL6-4.2LService typePower Steering Pressure Hose ReplacementEstimate$754.07Shop/Dealer Price$907.95 - $1365.40
Show example Chevrolet Trailblazer EXT Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(90)

Rating Summary
84
2
0
2
2
84
2
0
2
2

Dwight

33 years of experience
58 reviews
Dwight
33 years of experience
Chevrolet Trailblazer EXT L6-4.2L - Check Engine Light is on - Cumming, Georgia
Dwight is very efficient, knowledgeable and professional. I am extremely happy with the service and the detailed report describing the issue and the work performed. We have found our new mechanic and company!!! Kudos, job well done!!! Very impressed is not a strong enough word to describe the service and this experience.

David

26 years of experience
62 reviews
David
26 years of experience
Chevrolet Trailblazer EXT L6-4.2L - Car is shaking or vibrating - Tampa, Florida
David was amazing. Showed up on time and went above and beyond. Very professional

Ruben

36 years of experience
83 reviews
Ruben
36 years of experience
Chevrolet Trailblazer EXT L6-4.2L - Noise from engine or exhaust - Valrico, Florida
Ruben was on time. He was very polite and professional. He discovered the causes for the loud noise I was hearing. He then showed me what the causes are. I would recommend him happily.

Josten

16 years of experience
17 reviews
Josten
16 years of experience
Chevrolet Trailblazer EXT L6-4.2L - Check Engine Light is on - San Bernardino, California
Very professional, friendly & very detailed in his diagnosis, found my cars problem quickly!!

Excellent Rating

(90)

Rating Summary
84
2
0
2
2
84
2
0
2
2
Number of Chevrolet Trailblazer EXT services completed
990+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P0400 OBD-II Trouble Code: Exhaust Gas Recirculation Flow Malfunction
P0400 code definition Exhaust Gas Recirculation Flow Malfunction What the P0400 code means P0400 is an OBD-II generic code that the engine...
B1905 OBD-II Trouble Code: Air Bag Crash Sensor #2 Feed/Return Circuit Short to Battery
B1905 means there is a circuit error with the airbag crash sensor #2, likely due to a bad sensor or defective electrical components.
What Is the Difference Between Climate Control and Air Conditioning
It’s It’s important to be able to control the temperature inside your car’s cabin. During the summer, you need air conditioning to ensure comfort and safety, and during the winter, you’ll need heat for the same reason. However, different cars...

How do I adjust the rearview mirror?

Having a clear, unobstructed view out the back window of your car is vital. You need to see behind you while you’re on the road, when you’re backing out of a parking space and more. Whether you have a manual...

Overheating problems - 1985 Jeep CJ7

It sounds like you still have a blown head gasket or minute crack in the cylinder head or block, both of which can cause overheating. You mention that you "repaired the head," but don't identify what was done. I would...

I have a Ford [Taurus](/topics-taurus/) (13) the advanced traction control comes on when you start the car. Can OT be turned off

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com