Chevrolet Trailblazer EXT Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(68)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(68)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Chevrolet Trailblazer EXT Control Arm Assembly Replacement is $229 with $89 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Chevrolet Trailblazer EXTL6-4.2LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$333.78Shop/Dealer Price$382.08 - $518.86
2003 Chevrolet Trailblazer EXTV8-5.3LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$324.77Shop/Dealer Price$371.30 - $506.76
2006 Chevrolet Trailblazer EXTL6-4.2LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$394.25Shop/Dealer Price$451.24 - $617.21
2003 Chevrolet Trailblazer EXTV8-5.3LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$604.23Shop/Dealer Price$720.65 - $1065.72
2002 Chevrolet Trailblazer EXTL6-4.2LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$324.77Shop/Dealer Price$372.80 - $509.38
2005 Chevrolet Trailblazer EXTL6-4.2LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$324.77Shop/Dealer Price$371.46 - $507.05
2006 Chevrolet Trailblazer EXTV8-5.3LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$664.15Shop/Dealer Price$795.56 - $1185.59
2006 Chevrolet Trailblazer EXTL6-4.2LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$693.35Shop/Dealer Price$825.12 - $1215.41
Show example Chevrolet Trailblazer EXT Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(68)

Rating Summary
66
2
0
0
0
66
2
0
0
0

Rodric

9 years of experience
477 reviews
Rodric
9 years of experience
Trailblazer EXT 2006 - Power Steering Fluid Service - Riverdale, GA
Excellent service, he went above an beyond the call of duty. Its services like this that will keep me coming back using Your Mechanic, Thanks Rod bro.

Travis

10 years of experience
549 reviews
Travis
10 years of experience
Trailblazer EXT 2005 - Oil/Fluid Leak - Inver Grove Heights, MN
Great Service

Alex

18 years of experience
72 reviews
Alex
18 years of experience
Trailblazer EXT 2003 - Power Steering Pump - Glendale Heights, IL
Alex was great! He came in, and went right to work. And it didn't take him all day. I was rolling again in no time!

Victor

0 years of experience
196 reviews
Victor
0 years of experience
Trailblazer EXT 2006 - Water Pump - Rio Rancho, NM
Victor is very knowledgeable and professional. Keep me inform of all the details and outcome!!

Excellent Rating

(68)

Rating Summary
66
2
0
0
0
66
2
0
0
0
Number of Chevrolet Trailblazer EXT services completed
748+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P0703 OBD-II Trouble Code: Torque Converter/Brake Switch B Circuit Malfunction
P0703 Code means the PCM has registered a fault in the brake switch B circuit due to failed brake lamp switch, faulty fuse or socket
How to Buy a Good Quality Power Steering Pump
Power Power steering is what makes an ordinary driving experience extraordinary by adding to the power you apply to the steering wheel and making it simpler to turn the wheel. The power steering pump is the secret weapon in this...
How to Buy Good Quality Differential/Gear Oil
Gear, Gear, or differential, oil is used to lubricate the gears in a car’s transmission so that it can shift smoothly and easily. This type of fluid is generally used on standard transmissions, whereas transmission fluid is used in automatic...

Oil leaking under car

Hello, if the oil leak is big enough that you see it dripping on the ground, it should be inspected sooner than later to avoid damage. There are three possible sources of an oil leak, the engine, the transmission, and...

Getting Red Lighting Bolt Warning Light and Check Engine Light

Hi there. Assuming the Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) and red lightning bolt were on before your vehicle experienced the no start condition. This would indicate a malfunction in the electronic throttle control system. The computer has recognized the fault and...

Thank you for your time and the info needed

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com