Chevrolet Silverado 2500 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(17)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(17)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Chevrolet Silverado 2500 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Chevrolet Silverado 2500V8-6.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2000 Chevrolet Silverado 2500V8-6.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1999 Chevrolet Silverado 2500V8-6.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2003 Chevrolet Silverado 2500V8-6.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2004 Chevrolet Silverado 2500V8-6.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1999 Chevrolet Silverado 2500V8-5.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2001 Chevrolet Silverado 2500V8-6.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2000 Chevrolet Silverado 2500V8-5.3LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Silverado 2500 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0

Steve

37 years of experience
149 reviews
Steve
37 years of experience
Chevrolet Silverado 2500 V8-6.0L - Car is not starting - Fremont, California
Unable to fix or diagnose problem since the truck operated just fine when he arrived!!!!!! Not his fault. But he was very thorough and professional in attempting to find what might have caused the truck to not start for two days.

Robert

20 years of experience
1098 reviews
Robert
20 years of experience
Chevrolet Silverado 2500 V8-6.0L - Car is not starting - Golden, Colorado
Robert was great - knows his stuff and very friendly.

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Chevrolet Silverado 2500 V8-6.0L - Service Light is on - Benicia, California
great mechanic.

Ernest

25 years of experience
18 reviews
Ernest
25 years of experience
Chevrolet Silverado 2500 V8-6.0L - Door will not open - Kennesaw, Georgia
It was obvious that Ernest knew what he was doing, and he conducted himself in a professional and helpful manner.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0
Number of Chevrolet Silverado 2500 services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How Long Does a Blower Motor Switch Last?
Keeping Keeping the cabin of a car at the right temperature is no easy job. A number of components have to work together in order for your car’s cabin to stay comfortable. The heating and A/C systems in your car...
P0299 OBD-II Trouble Code: Turbo / Supercharger Underboost Condition
P0299 code definition P0299 is a generic OBD-II diagnostic trouble code indicating an underboost condition. What the P0299 code means The P0299...
Top 7 Reasons Your Check Engine Light is On
While While it’s often assumed that the check engine light (CEL) is an indication of a major mechanical issue, this isn’t always the case. In fact, according to many professional mechanics, a warning light can be caused by a minor...

After sensor replacement, 2nd diagnostic revealed P0139

No, it is not the catalyst. The P0139 code (https://www.yourmechanic.com/article/p0139-obd-ii-trouble-code-o2-sensor-circuit-slow-response-bank-1-sensor-2) is for the O2 sensor before the catalyst. The code is illuminated when the engine control module is testing the O2 sensor and it cuts the fuel to see if...

There is an abnormal vibration when the car is in park or drive

This definitely sounds like worn, weak, or broken engine mounts (https://www.yourmechanic.com/services/engine-mount-replacement). A quick visual inspection of the mount bushings may uncover which mounts are at fault. If the faulty mounts are not obvious, it may take an experienced and qualified...

transmission shift shock

Hi there. A lot of times, engine performance issues are mistaken for transmission issues. The loss of acceleration and jerking taking off could be, a lack of fuel pressure caused by a faulty fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement) or fuel pressure regulator...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com